介孔材料

  • 网络mesoporous materials
介孔材料介孔材料
  1. 介孔材料的小角度X射线衍射实验条件研究

    Study on Experimental Conditions of Small-angle X-ray Diffraction on Mesoporous Materials

  2. 液相法合成ZrO2介孔材料

    Synthesis of zro_ ( 2 ) mesoporous materials by liquid phase method

  3. 掺杂Au的ITO介孔材料的共沉淀法制备及气敏性能研究

    Gas Sensing Properties of Mesoporous ITO Doped with Au Prepared by Co-Precipitation

  4. Al2O3、SiO2、TiO2-SiO2介孔材料的制备、表征及应用研究

    Preparation , Characterization and Application of Mesoporous Al_2O_3 , SiO_2 , TiO_2-SiO_2

  5. X射线衍射测试结果表明,一定条件下可合成纯硅介孔材料MCM-48;

    The XRD results showed that the MCM-48 was synthesized .

  6. 氧化硅有序介孔材料MCM-41的微波水热合成及用于组装ZnO纳米粒子

    Synthesis of MCM-41 Mesoporous Silica by Microwave Irradiation and ZnO Nanoparticles Confined in MCM-41

  7. 喷雾干燥辅助表面活性剂自组装制备新型SiO2介孔材料

    Preparation of New Mesoporous SiO_2 by Aerosol-drying Assisted Surfactant Self-assembly

  8. 功能化介孔材料MCM-41选择性吸附水中污染物的性能研究

    Selective Adsorption of Pollutants by Functionalized Mesoporous Molecular Sieves MCM-41 from Aqueous Solution

  9. 以阴离子表面活性剂为模板的二氧化硅介孔材料(AMS)(英文)

    Anionic surfactant templated mesoporous silica ( ams )

  10. 用所合成的介孔材料对苯酚废水进行吸附处理实验,研究在不同时间、不同浓度、不同温度、不同pH值条件下介孔材料对苯酚废水的吸附处理效果。

    The adsorption effects are researched in different time , different concentration , different temperature and different pH values with the synthesized materials as adsorbent to treat phenol-containing wastewater .

  11. 对介孔材料催化剂进行酸性调变改性,并对改性前后的介孔材料催化剂进行脱烯烃效果对比及XRD和IR分析。

    The mesoporous material was modified to adjust its acidity , and said materials prior and post to modification was characterized by XRD and FT-IR .

  12. 新型介孔材料MCM-41的研究进展

    Research Progress of Mesoporous Molecular Sieve Materials MCM-41

  13. 晶化温度对介孔材料SBA-15结构与形貌的影响

    Effect of Crystallization Temperature on Structure and Morphology of Mesoporous SBA-15

  14. 含钨SBA-15介孔材料的合成及其催化氧化脱硫性能

    Synthesis and Catalytic Oxidative Desulfurization Properties of Tungsten-containing Mesoporous Material SBA-15

  15. 介孔材料内反应平衡的分子模拟及天然气CH4/CO2体系分离的实验和模型化

    Adsorption and Chemical Equilibria on Porous Materials by Molecular Simulation and Separation of CH_4 / CO_2 by Experiment and Modeling

  16. 水玻璃为原料在开放体系中快速合成介孔材料MCM-41

    Preparation of Mesoporous Silica MCM-41 from Waterglass with a Convenient Way in an Open vessel

  17. 介孔材料MCM-41的合成与性能表征

    Synthesis and characterization of mesoporous materials MCM-41

  18. 借助XRD,SEM等检测手段考察了晶化过程中加入无机盐对介孔材料稳定性的影响。

    The effects of inorganic salts and pH adjustment during the peroid of crystallization on the stability of mesoporous materials are investigated by XRD and SEM .

  19. 介孔材料在微PDMS芯片固定化酶中的应用

    Mesoporous Materials Modified PDMS-Chip for Enzyme Immobilization

  20. AEC三嵌段阴离子型表面活性剂导向法合成厚壁介孔材料

    AEC Tri-Block Anionic Surfactant Templating Mothod for Synthesizing Thick-Wall Mesoporous Materials

  21. 猪胰脂肪酶在介孔材料SBA-15中的固定化及其催化活性

    Immobilization and Catalytic Activity of Porcine Pancreatic Lipase on SBA-15 Mesoporous Material

  22. 负载TS-1导向剂的介孔材料的合成、表征及催化性能研究

    Synthesis , Characterization and Catalytic Properties of Mesoporous Materials with Loading of TS-1 Precursors

  23. 以合成有序介孔材料MCM-41为主体材料,通过浸渍法及后续热处理工艺,在孔道中组装氧化铕的团簇粒子,并对其进行结构表征。

    Europium oxide nanoclusters were synthesized within ordered meso porous MCM-41 by using wet impregnation technique .

  24. 本文以MCM-41和SBA-15两种具有代表性的不同孔径的介孔材料为载体,采用物理吸附法固定化漆酶。

    The method for laccase immobilization on mesoporous material by physical absorption has been studied .

  25. 由MCM-22沸石结构前驱体合成介孔材料及其催化性能的研究

    Synthesis and catalytic performances of mesoporous material from precursor of MCM-22 Zeolite

  26. 应用动态力学热分析技术研究了纳米介孔材料MCM-41对有机玻璃PMMA动态力学行为的影响。

    The effects of nanostructured mesoporous material MCM41 on the dynamic mechanical behavior of PMMA were studied by DMTA technique .

  27. 介孔材料SBA-15负载钯催化剂的制备、表征及其在Heck反应中的应用

    Pd Supported on Mesoporous SBA-15 : Preparation , Structure , and Catalytic Properties in Heck Reactions

  28. Pd/PdO在MCM-41介孔材料孔表面的溶液移植

    Solution - Phase Grafting of Pd / PdO onto the Pore Surface of MCM - 41 Mesoporous Molecular Sieves

  29. 选择不同分子量的具有不同链长的PVP聚合物为助模板剂制备得到不同大小的空心球介孔材料。

    When the different molecular weight PVP with different chain length as co-template was applied , the different mesoporous materials were obtain .

  30. 最后,根据动力学和热力学理论论述了AMS介孔材料的合成机理。

    Finally , the formation mechanism of AMS was discussed from the view of the kinetics and energetics , respectively .