三角形分布

  • 网络Triangular distribution;Triangle distribution
三角形分布三角形分布
  1. 论文结合ANSYS有限元分析方法对培养釜的两项关键技术进行了深入研究。首先研究分析了支撑环结构的接触压力分布,得出了三角形分布更为符合实际接触应力分布的结论。

    The thesis has developed two key technologies of cultivating vessel conducted in-depth study with ANSYS finite element analysis . First , the contact pressure distribution of the supporting ring structure was researched and analyzed ; triangular distribution of contact stress distribution is more realistic conclusions .

  2. 在算例中,为了了解结构进入弹塑性状态的过程,采用逐级施加倒三角形分布荷载的加载制度。

    In some computational examples in order to understand how structure enters into the elasto-plastic state a step loading system in inverted triangular distribution is introduced .

  3. 从理论上证实了基础滑移隔震多层房屋的地震作用分布不同于传统结构的倒三角形分布,而为K型分布;

    It is proved that the distribution of earthquake action on multistorey masonry structure with sliding base isolation is different from that of the traditional one . It appears as a " K " shape distribution instead of an inverted triangle distribution .

  4. Boussinesq公式,推导出在矩形面积上三角形分布荷载作用下,桩周土层中任意点产生的附加应力的计算公式。

    By means of Boussinesq 's formula , the formula for the additional stress in the strata around pile under the triangle load over rectangle area is deduced .

  5. 该算法将曲面的三角化转化为曲面参数域的三角化,并将二维图形的集合运算与Delaunay三角剖分应用于曲面参数域边界的处理,从而使裁剪曲面在边界上的三角形分布均匀。

    By converting the triangulations or surface into that of corresponding valid parametric domain , and applying the boolean operation and delaunay triangulation of 2D polygon to processing the boundary of surface parametric domain , uniform triangles bordering the boundary have been obtained .

  6. 在现有的文献和试验资料基础上,假定桩侧摩阻力沿桩身为倒三角形分布,提出了联合应用Geddes解和Boussinesq解确定附加应力场,进而求解复合地基沉降的方法。

    Based on the existing literature and testing data , the side friction distribution was assumed triangle and a method to settlement of composite ground has been put forward . The key point is that the additional stress field should be obtained by applying both Geddes solution and Boussinesq solution .

  7. 滑床抗力呈两个相对的三角形分布;

    The resistance of sliding bed distributes as triangle .

  8. 平盘或棒状隆起;它使用三角形分布来代替各种分布。

    Plate or bar-shaped eminence ; Since the triangular .

  9. 三角形分布,又分为起点为零和不为零两种情况。

    The distributing in the shape of triangle includes zero-beginning and not zero-beginning .

  10. 上轧辊与管坯的接触压力分布是以轧辊中点为界分为两个部分,每个部分内接触压力近似呈三角形分布。

    The contact pressure on the upper roller is divided into two triangular shape parts .

  11. 三角形分布色散位移单模光纤

    Triangular profile dispersion-shifted single-mode fiber

  12. 半无限体内部三角形分布条形荷载引起的土中应力计算公式

    Calculating formulas of stresses in soil subjected to triangle distributing strip load beneath the surface of ground

  13. 采用平面波展开法证实了填充液晶的二维三角形分布的空气孔光子晶体方向能隙的可调节性。

    The tunability of directional band gap in a two-dimensional photonic crystal of air holes in a semiconductor matrix is demonstrated numerically , using the plane wave expansion calculation .

  14. 本文首先研究传感器网络连通覆盖问题,提出了一个正三角形分布圆形区域划分方法,推导出要使传感器网络保持连通覆盖的条件。

    In order to solve the connected coverage problem , we propose a novel triangle-arranged circle division method to model a sufficient condition for the network to maintain connected coverage .

  15. 柔性基础支撑式桩侧出现向下的摩阻力,低荷载水平时呈倒三角形分布,高荷载水平时呈倒梯形分布;桩顶端发生明显向上刺入变形。

    The distribution of downward frictional resistance of bearing pile under flexible foundation shows inverted triangle shape when the load-level is lower and shows inverted trapezoid shape when the load-level is higher .

  16. 基于刚度等效原理确定散粒煤的性能参数,C80B车体的边界非线性有限元分析表明:车体端墙静压力分布沿端墙高度呈近似三角形分布。

    Based on the stiffness equivalence principle to determine the parameters of granular coal , the boundary finite element analysis showed : the side wall static pressure distribution along the side wall height was similar triangle .

  17. 本文从概率理论出发,对机械加工中误差的各种分布形式进行了探讨。这些分布形式有等概率分布、三角形分布和正态分布等。

    This paper , according to the theory of probabLity , analyzes and discusses various kinds of distribution forms of errors which are caused by machining , such as , even distribution , triangle distribution and normal distribution etc.

  18. 论证了对于普通电子计数器,计数误差服从三角形分布而不是均匀分布,并给出了这种论点的物理解释,此外,论文还讨论了数字仪表的其它常见计数误差的分布形式。

    It proves and explains physically that for conventional electronic counters , the counting error obeys triangular distribution rather than uniform distribution . Furthermore , discussion is also given to other common errors and its distribution pattern of digital measuring instruments .

  19. 在试验基础上,分析了三角形分布荷载下钢筋混凝土无腹筋梁抗剪机理,指出斜截面受剪承载力由斜裂缝末端剪力决定,并提出了建议计算方法。

    Based on experiment , the shear mechanism of reinforced concrete beam without web reinforcement under triangle load was analyzed . The shear capacity is decided by the magnitude of shear force above the end of the inclined crack , and the suggestive calculation method is presented .

  20. 文中分别讨论了有一对集中力,均布荷载,局部均布荷载,三角形分布荷载及一对集中力偶作用之下悬臂矩形板发生屈曲时的最小临界荷载。

    We 'll discuss the least critical loadings when the bucklings of rectangular plates acted on by a pair of concentrated forces , uniformly distributed loads , locally uniform distributed loads , distributed loads in the form of triangle and a pair of concentrated couples occur respectively .

  21. 本文把地基土看作双层地基,当冻深等于扩大式基础顶面埋深时,将冻胀反应力简化成三角形分布,推导出了扩大式桩和条形基础上的冻胀反力的计算公式。

    This article regards the foundation soil as the double-decked ground , when the frozen of deep foundation equivalent to the expansion of the top surface depth , Inferred in the derived extended piling wall frost heave on the basis of the formula for calculating the reaction force .

  22. 三角滩是分流河口区典型的微地貌单元,平面上呈三角形,分布于分流河口靠主流下游一侧。

    It is a typical microgeomorphologic unit at distributary mouth , which is triangular in plane and develops at the confluence district of a main river and distributary stream .

  23. 紊动强度沿垂线基本呈三角形态分布,在近自由水面区域纵向和垂向出现最大紊动强度下移现象。

    The distribution of turbulence intensity alongside the vertical line is substantively in triangular shape with the maximum turbulence intensity decreasing at longitudinal and vertical direction near the free surface .

  24. 以作用倒三角形水平分布荷载的等截面弯剪悬臂杆的侧移曲线作为其初始侧移模式。

    Applying the inverted triangular distribution of lateral force to the cantilever column of constant section , and the displaced shape of the column is regarded as the initial mode of lateral displacement .

  25. 试验结果表明:采用锐角三角形的分布腔结构及基于多齿刀具切削法的铜纤维烧结毡能显著提升换热器的性能。

    And the results showed that : the heat exchanger which uses the heat transfer plate having the sub-acute triangle structure and porous copper fiber sintered felt which is fabricating by the copper fibers manufacturing by the multi-tooth cutting method had excellent performance .

  26. 采用三角形网格的分布杂交法,以变边界模型建立起威海及烟台南部近岸海域纯潮作用下的COD浓度平流&扩散模型。

    Using the fractional hybrid method with triangle grids , this paper constructs a convection-dispersion model of COD concentration with varied boundary which is affected by the tidal current in the offshore area of southern Yantai and Weihai .

  27. 泵浦组件(呈三角形等间距分布)由9个20W的激光二极管组成,最大泵浦功率为180W。

    LD pumping module is composed of nine 20W laser diodes , which has maximum pump power of 180W .

  28. 而三角形格点分布的渐变微结构光纤对空气孔间距、最内层空气孔的直径和直径递增量都比较敏感,不同参数条件下它的色散曲线变化较大。

    But the triangle-lattice MOF have strong sensitivity to the three parameters , and its dispersion curves change significantly at different cases .

  29. 采用了三角形反力分布和矩形反力分布两种模式的埋入式钢-混凝土接头计算方法对背景工程进行了解析分析。

    The background project has been analyzed using the analysis method for embedded steel-concrete joints based on the triangular and rectangular distribution of reaction .

  30. 本文基于表面弹性理论,对具有表面效应的纳米接触问题进行了研究,主要工作如下:(1)三角形法向分布力作用下的纳米接触问题。

    In frame of surface elasticity , the nano-contact problems with effects of surface are studied , the main researches are listed as follows : ( 1 ) The nano-contact problem applied with the triangle distribution pressure .