表面防腐

  • 网络Surface anti-corrosion;surface protection;Surface embalming
表面防腐表面防腐
  1. 锚固钢筋的表面防腐试验研究

    Experimental Investigation of Anchor Bar Surface Protection

  2. SLH低处理表面防腐涂料

    Anti-corrosive paint for SLH light treated surface

  3. 钢管外表面防腐涂层研究综述

    Overview Research on the Antiseptic Outer Layer of the Steel Tube

  4. 金属表面防腐蚀硅溶胶涂层的研究进展

    Advances in Research of Silica Sol Coatings on Metals

  5. 金属表面防腐用含聚四氟乙烯复合涂膜的研制

    Preparation of PTFE Composite Coatings on Metal Surface

  6. 本文概述了中国涂覆工业面临的两难局面;同时,就表面防腐行业的最新技术&锌基水溶性涂覆工艺及产品性能和经营特点作了较为详尽的介绍。

    In this article , two difficult positions facing China 's Coating industry are described .

  7. 综述了近年来铝颜料表面防腐处理方法,主要有吸附腐蚀抑制剂法和包覆膜法。

    The methods of surface treatment of aluminum pigments including encapsulation and using corrosive inhibitors are summarized .

  8. 检查结果表明,内腔表面防腐状况有了明显改善。

    And the inspection result showed that the coating painted on the tube inner surface was improved obviously .

  9. 试验结果表明,稀土锌系磷化+低温阴极电泳工艺适合于镁合金的表面防腐处理。

    It is thus concluded that the zinc phosphate film + cathodic electro-paint is an effective technique for protection of magnesium alloy .

  10. 滨海电厂大型室外装置外覆镀锌板材表面防腐涂料选择及施工

    Choice and Construction of a Kind of Coating for the Zincing Plate of the Large Device Outside Power Plant and Close to Shore

  11. 换热管腐蚀失效分析及防腐蚀结构设计钢管拱桥钢管表面防腐和防锈施工技术

    The Analysis of Tube Corrosion Failure and Corrosion Prevention Structural Design On the anti-corrosive and anti-rust construction technology of the steel tubular arch bridge

  12. 论述了钢丝主缆涂装工艺及钢质护栏内、外表面防腐涂装方案。

    The painting process of steel wire main cables and the corrosion prevention painting projects for the interior and exterior surface of steel guardrail were discussed .

  13. 用XPS和AES研究锌表面彩色防腐蚀膜

    XPS and AES studies of anticorrosive colour film on zinc

  14. 具体结果如下:(1)试验获得了两步法对镁锂合金表面进行防腐处理的工艺,该工艺包括预处理、预镀和化学镀三个过程,以该工艺能够得到致密、均匀的Ni-P镀层。

    The research shows the results as follows : ( 1 ) By means of experiment , two step method preservative treatment technology on Mg-Li alloy was obtained , including pretreatment , pre-plating and electroless plating three processes .

  15. 低表面能防腐耐候氟碳涂料的研究

    Study on Low Surface Energy and Corrosion and Weather Resistance Fluorocarbon Coating

  16. 海洋大气环境中钢铁表面的防腐蚀

    The Anti corrosion to Steel Structure in Marine Atmosphere

  17. 镀锌层表面硅酸盐防腐膜的研究

    Studies of silicate anticorrosive film on zinc plate surface

  18. 在抽油杆表面涂防腐涂料和使用高强度抽油杆;

    Smearing corrosion prevention material on sucker rod surface and using high strength sucker rod ;

  19. 试验和检测结果表明采用两步法对镁锂合金表面进行防腐处理工艺可行,得到的镀层性能良好。

    The results showed that we get excellent nickel coating plating on Mg-Li alloy by two-step process .

  20. 主要用于新造船、上钻井平台即石油储罐内壁等钢铁表面的防腐底漆。

    As anti-corrosion primer for steel surface such as the new production of ship and offshore platform .

  21. 工作腔及螺杆转子表面有防腐涂层,可适应恶劣工况。

    There are antisepsis coat in the surface of pump cavity , so our pump can work in the abominable environment .

  22. 当前钢铁表面除锈防腐工程,有投资大、效率低、污染环境、消耗能源等问题。

    In the present engineering of treating the steel surface exist such disadvantages as high cost , low efficiency , environmental pollution and great consumption of energy .

  23. 金属腐蚀会给国民经济造成巨大的损失,而金属腐蚀的防护最有效、最常用的方法是在金属表面涂覆防腐涂料。

    Metal corrosion will give national economy caused great damage . The most effective , most commonly methods of metal corrosion protection is coating anti-corrosion coatings inmetal surface .

  24. 近年来,随着科技的发展,对材料与零部件的要求越来越苛刻,耐腐蚀的高性能无机涂层被广泛应用于各种金属表面的防腐与防护。

    In recent years , with the development of technology , the requirements to materials and components are increasingly demanding . High-performance corrosion-resistant inorganic coatings are widely used in the protection of metal surfaces .

  25. 金属管道随处可见,与我们的生活息息相关,大多数管道在使用前都要进行管道内表面的防腐处理,以达到减小腐蚀、延长寿命的目的。

    Metal pipes can be seen everywhere , and we live close to it , the majority of pipeline must be conducted in anti-corrosion treatment before using , to reduce corrosion and extend the life .

  26. 喷涂机器人是工业机器人技术与涂装设备结合的产物,主要用于产品表面的防腐和装饰,特别是用于汽车、航空航天、电子产品生产等行业。

    Painting robots are the combination of robotics technology and painting equipment , mainly used for the anticorrosion and decorate of product surface , especially for the automotive , aerospace and electronic product manufacturing and relative industries .

  27. 本课题主要是研制一种新型的表面反应防腐涂层,利用感应熔覆工艺使表面涂层材料与抽油杆基体形成冶金结合,在抽油杆表面形成一种耐蚀涂层。

    The paper mainly focuses on a new type of surface-reaction coating of anti-corrosion , which utilizes induction cladding technology to make the surface coating material and the sucker rod matrix form the metallurgical bonding and to form an anti-corrosion on the surface of the sucker rod .

  28. 总结了深圳西部电厂5、6号机组烟气海水脱硫工程特种防腐及其施工的实践经验,重点介绍了混凝土基体表面特种防腐施工的工艺技术。

    A special corrosion resistant technique and the construction experience for sea water desulfurization system of unit 5 and 6 in Shenzhen West Power Plant are introduced . The major point is focused on the construction technique of the special corrosion resistant for the face of the concrete base .

  29. 金属表面硅烷试剂防腐涂层性能测试

    Behavior of Corrosion Resisting Silane Coating on Metallic Surface

  30. 大型钢结构表面热喷涂防腐技术的现状与进展

    Status and Progress in Thermal Spraying Technique for Corrosion Protection of Large Steel Structures