立柱

通过研究现行设计规范与试验结果的误差，提出了在导轨和支撑约束条件下C型截面立柱的计算长度系数可取为0.8。

The effective length factor of the stud constrained by track and bracing is suggested to be 0.8 by studying the errors between the results of the test and those from design specifications which are currently used .

对C型冷弯型钢立柱和石膏板、定向刨花板（OSB板）组成的组合墙体，进行了13块足尺试件（宽2.4m，高3m和3.3m）的抗剪试验研究。

A tentative study is carried out with thirteen full-size ( 2.4 m by 3 & 3.3 m ) specimens of cold-formed steel stud composed wall subjected to shear loading .

这些立柱必须支撑起屋顶的重量。

The pillars have to support the weight of the roof .

这些立柱坍塌了，一部分屋顶坠落下来。

The pillars gave way and a section of the roof collapsed .

一根横杆连接着两根立柱。

A transverse bar joins the two posts .

其巨大的立柱为月桂和木兰花所环绕。

Its huge columns were wreathed with laurel and magnolia .

曾经典雅的白色立柱正在掉漆。

Its once-elegant white pillars are peeling .

把这些木板钉在立柱上，这样围墙就牢固了。

Nail the boards onto the fence posts , they will make a good fence .

基于PLC的中立柱喷胶机器人系统设计

The design of spray-glue robot system for SANTANA brace based on PLC

客运专线路基声屏障PC立柱与基础连接试验研究

Experimental Study on Connection between PC Column and Foundation of Railway Subgrade Sound Barrier

基于ANSYS地铁侧墙立柱的优化设计

Optimization Design of Ttube Side-wall Column Based on ANSYS

FD－600型翻倒式自动卸料离心机立柱根部应力分析

Stress Analysis For Column Root Of FD-600 Type Tumbling Automatic Discharge Centrifuge

基于ANSYS的磨齿机立柱的静动态研究球磨机齿轮副振动问题的分析及改进

Study on Static & Dynamic Performance of the Column of Gear Grinder Based on ANSYS Studying and Improvement on Vibration of Ball Mill Gear Run

CM2磁试验设备主框架立柱、横梁加工工艺

The manufacture technology for the columns and crossbeams of the fram of CM2 magnetic testing equipment

SiC含量对液压机立柱表面Ni-SiC复合镀层性能影响

Influence of SiC Content on Properties of Ni-SiC Composition Coating Deposited on Prop of Hydraulic Support

对平台特殊结构如K型管节点及支撑结构和立柱结构进行了强度分析和疲劳寿命分析。还研究了平台吃水数据采集、压载状态监测等技术。

A special strength analysis and fatigue life analysis are made for rig ′ s special structures such as K node of pipe braced structure and column structures , etc.

振动时效（VSR）技术在电极立柱制造中的应用

The Application of VSR to the Manufacturing of Electrode Pole

在大型有限元分析软件ANSYS的平台上，对立柱和底座进行静力学分析，得到静态载荷作用下结构的节点应力云图和变形云图。

Then the static property of the base frame and the vertical column were simulated with ANSYS . The figures of nodes stress and the deformation were obtained .

定向爆破拆除500t级立柱式水塔

Directional Blasting Demolition of a 500 t - class Water Tower

WS1·7掩护式液压支架立柱缸筒特殊修复工艺

Specific repairing technique of leg cylinder of WS1.7 powered shield support

YZ-35牙轮钻机龙门架立柱断裂原因分析及处理

YZ-35 rotary drill Dragon Gate Column Break Reason Analysis and Processing

本文以薄板弯曲理论为基础，提出了解决由滚轮引起的叉车门架立柱翼缘局部弯曲问题的方法，在IBMPc/AT机上编制了相应的程序。

In this paper a method for sol-ving the fork-lift truck mast flange local bending due to rollers is presented , based on the thin plate bending theory . The computer program has been prepared for IBM PC / AT .

本文研究的前开口形井架及其底座就是由K形井架及自升式底座组成，它的突出特点是井架、底座的立柱和人字架都可以折叠在一起，减少了体积，便于运输。

The derrick and substructure in the thesis are made up of K-derrick and self elevating substructure . They have many prominent characteristics . First , K-derrick , posts of substructure and frame can pucker together in order to reduce volume and transport conveniently .

热处理对液压立柱表面Ni-P-B镀层性能的影响

Influences of the heat treatment on properties of the electroless Ni-P-B coating on the hydraulic upright post

分析了立柱、动梁变形与两者间接触状态的关系。300t研配试冲压机动梁结构优化设计

The relations of the contact status and deformation of movable crosshead and columns are researched . Structure Optimization of Moving Beam of 300t Punch

GM-Lift半潜式平台立柱的结构设计与强度分析研究

A Study on Structural Design and Strength Analysis of Column of GM-Lift Semisubmersible

BT-30钻削中心立柱建模及其有限元分析

Modeling and Finite Element Analysis for the Vertical Pillar of BT-30 Drilling Machining Center

从理论上分析了采用C650改造车床镗削立柱缸的工艺可行性。

From analyzed theoretically the adoption C650 reforms the craft possibility of the lather the cylinder of hydraulic legs .

目前，适用于深海油气开采的平台类型主要有：FPSO、半潜式平台、立柱式平台和张力腿平台。

At present , the main platforms that can be used for deepwater oil and gas exploitation are FPSO ( Floating Production Storage and Offloading system ), Semi-submersible , Spar Platform and Tension Leg Platform ( TLP ) .

由钢立柱两侧翼缘和石膏板、OSB板通过自钻螺钉相连而形成的墙柱体系是此种结构的主要竖向承重单元。

Wall-stud system is composed of steel stud with plasterboard or OSB attached to both flanges of the stud with screws at regular intervals . It is the main vertical bearing structure in this system .