火工品
- 网络Initiators & Pyrotechnics;pyrotechnics;Initiators and Pyrotechnics;Initiating Explosive Devices
-
模糊神经网络在火工品生产系统安全评价中的应用
Application of Fuzzy Neural Network to Safety Assessment in Pyrotechnics Production Systems
-
对火工品可靠性(或安全性)评估中通常采用的经典方法进行了剖析。
The conventional method to evaluate the reliability of pyrotechnics was discussed .
-
基于P~t曲线的导弹火工品品质测试
Quality Testing of Initiating Explosive Device in Missiles Based on P ~ t Curve
-
工业X射线CT在火工品检测中的应用
Industrial X-Ray CT Used in Initiating Explosive Device Detection
-
基于Hopkinson压杆实验技术研究火工品及含能材料的抗高过载能力
Study on Overloading-resistibility of Initiator and Energetic Materials Based on the Technique of Hopkinson Pressure Bar
-
比较系统分析了SCB火工品的作用机理;
SCB ignition mechanism has been more systematically investigated .
-
SCB火工品的研究与发展
The Research and Development on Semiconductor Bridge Initiator
-
为了满足现代高性能火炮和航空航天技术对点火快速性、一致性、安全性的要求,半导体桥(SemiconductorBridge,简称SCB)火工品逐渐发展起来。
In order to attain the requirement of the contemporary high-performance guns and aerospace technology ignition which demands speediness , consistency and security , the semiconductor bridge ( SCB ) igniter is rapidly developed .
-
21个相同F-S火工品串联系统贮存可靠性评估
Estimation of the storage reliability in a series system of 21 F-S powder products
-
为了提高导弹火工品的存贮安全性和使用可靠性,提出了一种基于P~t(压力-时间)曲线获取的火工品品质测试分析方案;
A systematical solution of testing and analyzing the initiating explosive devices ' quality is presented to promote the safety in saving and reliability in using of missile initiating explosive devices , which is based on acquiring P ~ t ( Pressure ~ time ) curves of those .
-
SCB火工品发展迅速,但是目前还未见对其失效机理进行研究的文献资料报道。
The technology of SCB initiating device has a rapid development , but no literature about the failure mechanism can be found at present .
-
同时,应用大型有限元分析软件Ansys/Ls-dyna对试验过程进行模拟仿真,得到了冲击波加载过程中火工品组件上的应力分布云图、应力值、过载加速度时间曲线、应力时间曲线。
At the same time , the stress clouds , stress value , the over-loading acceleration-time curve and stress-time curve in the initiator are attained , after the experimentations were simulated by the large FEA software-Ansys / Ls-dyna .
-
结合CF药剂的特点和火工品失效的模式分析,初步确立了CF这种新型药剂的长储性能检验方法。该方法包括三个部分,静爆试验、成份分析和热分解性能分析。
The methods for estimating the storage performance of CF was established , according to both the performance of CF and the failure mode of EED , including of static detonation test , component analysis and thermal performance analysis .
-
选择TVS芯片对SCB火工品进行电磁防护时,在满足击穿电压高于发火电压的情况下,应尽量选择结电容较大、寄生电阻较小的芯片。
The TVS chips whose breakdown voltage is higher than the ignition voltage , which has larger junction capacitance and smaller parasitic resistance , should be selected to protect SCB device from electromagnetic .
-
分析了NDP在电火工品无损检测中电桥自动调平衡的方法、参数计算及硬件电路和软件流程图。
Analyzes the method of auto balance 、 parameter calculation 、 hardware circuit and software flow chart of electric bridge of NDP in the non - destructive testing of EED .
-
本文在分析射频对电火工品的作用机理的基础上,研究了用铁氧体磁珠对半导体桥(SCB)火工品进行射频加固的技术。
In this paper , based on the mechanism of RF on EED , we study the RF-reinforcement technology , in which ferrite beads are used to protect SCB initiators .
-
用吉赫横电磁波传输装置(GTEM)、自行研制的防爆器、场强计等组成电火工品抗电磁干扰模拟测试系统。
This report introduces the analogue test system of electric initiators resistant to electromagnetic interference which are made up of GTEM transmisson device , explosion-proof device made by ourselves 、 and field strength meter .
-
火工品(IED)作为重要零件在运载火箭及导弹中的应用十分广泛,任一火工品的质量问题都可能导致整个发射的失败,造成巨大的经济损失和重大的政治影响。
The IED is the important spare part and is applied very extensively in carrier rocket and guided missiles . The quality problem of any IED may cause the whole failure for shoot , and results in huge economy lose and important political influence .
-
根据电火工品(EED)对雷电电磁脉冲(LEMP)电磁能量耦合的不同途径(传导耦合和辐射耦合),分析了雷电电磁脉冲对电火工品的损伤机理。
The damage mechanism of EED ( electric explosive device ) from LEMP ( lighting eletromagnetic pulse ) has been analysed in this paper in terms of the different ways in which the eletromagnetic energy of LEMP is coupled to EED .
-
本文提出了一套雷电电磁脉冲(LEMP)模拟装置,以模拟闪电时的远场电磁环境,用于测试电火工品和电子器件对LEMP的感度。
A device which can simulate lightning electromagnetic pulse ( LEMP ) so as to provide a simulation for the long distance lightning electromagnetic environment can be used to test the sensitivity of electroexplosive devices ( EED ) and electric devices towards LEMP .
-
射频对电火工品的影响及防护措施
The Effect of Radio Frequency to EED and Its Protection Measure
-
火工品动态着靶模拟仿真技术研究
Study on Dynamic Touch-target Analog Simulation Technique for Initiating Explosive Devices
-
大功率高频等离子体点火电源的研究与设计电火花点火,电气点火电点火器-火工品
Design and Research on Large Power High-frequency Plasma Ignition Burner Device
-
虚拟现实在火工品生产培训中的作用
Application of Virtual Reality Technology in Powder and Detonator Produce Training
-
环氧树脂胶粘剂在火工品应用中的工艺研究
Technological Study of Epoxy Resin Adhesive Applied to Initiating Explosive Device
-
火工品作用后开路电阻的动态测量
Dynamic Measurement of Shutdown Resistance of Initiating Explosive Device after Function
-
携行导弹火工品系统安全性定量分析方法初探
Study on Safety Quantitative Analysis of Missile Equipped Initiating Device System
-
电火工品无损测试仪的电磁兼容及可靠性设计
The EMC and Reliability Design of Electronic Pyrotechnical Non-dissipation Measurement Instrument
-
基于样本最大概率失败数的火工品可靠度估计
Reliability Estimation of Initiating Devices Based on Sample Maximum Failure Probability
-
火工品可靠性增长模型及规划方法研究
Study on Reliability Growth Model and Plan for Initiating Explosive Devices