毛刺

分析了毛刺的成因，阐述了毛刺的影响因素及抑制措施。

Rag forming cause , factor affected and control measures are described and analyzed .

齿轮精整是利用数控精整冲床去除齿轮上毛刺以提高齿轮精度的一道工序，该工序需要将齿轮放置在冲床工作台的指定位置，且具有较高的定位精度。

Gear finishing is the procedure in which NC working punching machine is used to decoct the gear rag etc , which needs that the gears must be placed at appoint position of the punching worktable and positioning accuracy is high .

纽扣、拉链应无毛刺和锐利边缘

Buttons , zippers should be glitch free and sharp edge .

一种磨料刷去毛刺设备的PLC控制系统设计

Design of PLC Control System of a Deburring Equipment with Abrasive Material

LD研磨轮去毛刺的加工实验研究

Study on Machining Experiments of Light Deburring Wheel

结果乳腺癌的CT表现为不规则肿块或结节状影，有分叶，边缘放射状毛刺；

Results The appearances of breast cancer in CT were irregular mass or nodosity with lobular and spiculate boundary , distorted glands and higher density than normal glands .

磨料刷除毛刺设备的AVR单片机控制系统

AVR microcontroller system of a deburring equipment with abrasive

结果：42例孤立结节性肺癌的主要CT表现：11例结节边缘毛糙，有明确小毛刺或锯齿状改变；

Results : the main CT findings in 42 cases were as follow : ( 1 ) 11 cases with rough edge and definite small hairy stabs or saw-toothed change ;

结果：MRI显示22个病灶形态不规则或有毛刺征，9个病灶存在癌组织坏死；

Esults : Dynamic MR findings of 26 lesions included : irregular shape or speculated margin in 22 lesions , necrosis in tumor central parts in 9 lesions ;

运用超声波轮式探头监控ERW钢管内毛刺高度

Wheel Probe to Monitoring Inside Burr Height of ERW Pipe

不典型增生5例，主要MSCT表现为：肿块形态不规则（4/5）；边缘不规则形呈毛刺状（4/5）；

The appearance of the atypical duct hyperplasia on MSCT displayed irregular shape ( 4 / 5 ), ill - defined ( 4 / 5 ) mass .

方法将84例乳腺癌患者X线征像中肿块、钙化、毛刺、病变区密度及有无结构扭曲与免疫组化测定的p53基因的表达进行对照研究。

Methods The mammographic features of 84 patients with breast carcinoma , including tumor , calcification , spicule , density and structural disorder with p53 determined with immunohistochemical staining technique were involved in this study .

结论：毛刺征对SPLC的诊断和鉴别诊断具有较高价值。

Conclusion : Spiculation has the higher value in diagnosing and differentiating SPLC .

目的：探讨周围型小肺癌（SPLC）毛刺的CT表现、诊断价值及多平面重建（MPR）的检出作用。

Purpose : To evaluate the CT manifestations , diagnosis value and multiplanar reconstruction ( MPR ) detection of spiculation in small peripheral lung carcinoma ( SPLC ) .

结果瘤-肺交界区HRCT表现为远端模糊和（或）毛糙、毛刺影，周围型肺癌79%，肺良性结节22%（P<0.05）；

Results Blurred or rough , spiculate HRCT images in distal lung-tumor interface were observed in ( 79 % ) of PLC and ( 22 % ) of benign nodules ;

孔内PI钉头厚度以及出口毛刺高度会随着主轴转速的增大而有稍微减小的趋势，随着进给速度和钻孔数的增大而有稍微增大的趋势。

PI inside the nail head thickness and exit burr height will slightly decrease with the spindle speed increasing , and lead to a trend of increase with the feed speed and the number of drilling increasing .

结论OPN、ON在乳腺癌组织中高表达，OPN、ON高表达与钼靶X线微钙化征象密切相关，但与各临床病理特征及X线片中毛刺征无相关性。

Conclusion The expression of OPN and ON is higher in breast carcinoma , which is significantly related with microcalcification , but not with other clinic-pathologic features .

试验表明，阶跃式三参数振动钻削的入钻定位误差r、孔扩量ΔD、出口毛刺高度H值比普通钻削的相应值显著降低。

The test demonstrates that the deflation of the drill point r , the error of the pore diameter Δ D , the height of burrs H drilled by three parameter vibration drilling method are apparently reduced than that achieved by conventional drilling method .

镁合金搅拌摩擦点焊缺陷主要有飞边、毛刺、圆环氧化磨损、渐开线和弱连接等，其中渐开线形式主要有三种，分别是一字形、S形、V形。

The defects in friction stir welding of magnesium alloys are main flying edge , burr , oxidation wear rings , involute and weak connections , while the involute are main in three forms , namely linear shaped , S-shaped , V-shaped .

肿块大小、边缘毛刺征及周边高回声晕征、内部回声及微钙化均与IDC组织学分级无显著相关性。

Tumor size , edge of the spiculation and hyperechoic halo , internal echo types and microcalcification were not significantly correlated with histological grade of breast cancer ( P0.05 ) .

简述了ERW直缝焊管清除内毛刺的方法及设备构成；ERW直缝焊管成型装置的发展

Briefed are the process and equipment configuration of the inner burr-removing system for ERW straight welded tubing . Development of ERW Straight Welded Pipe Forming Mill

目的探讨毛刺征对肺孤立结节（≤3cm）的诊断与鉴别诊断价值。

Objective To study the evaluation of spiculation sign in the diagnosis and differential diagnosis of solitary pulmonary nodule (≤ 3 cm ) .

基于数据库和Java，研究了金属切削毛刺数据库系统的设计，实现了切削毛刺数据的管理、切削毛刺类型与尺寸大小及加工参数的查询，进一步丰富和完善了金属切削毛刺的预报与控制理论。

Based on database and Java , the design of database system about cutting burrs is researched . The management of cutting burrs data , query of cutting burrs style , dimension and parameter are realized to perfect the prediction and control theory of cutting burrs .

时序控制是整个系统设计的核心，为尽量避免毛刺现象，各模块的时序控制都是采用单进程的Moore状态机实现的。

Timing control is the core of the entire system design , in order to try to avoid burr situation , the timing control module is a single-process implementation of the Moore state machine .

介绍了使用VHDL描述有限状态机的方法，重点分析了综合过程中的竞争和毛刺现象产生的原因，并提供了解决方法。

The method of description of finite state machine with VHDL is presented . This paper analyses causes of the phenomena of burr and competition in the process of synthesis in detail and provides the solutions .

介绍了在用PMT闪烁探测器测量脉冲中子产额时，由于粒子的统计涨落而使脉冲波形呈现毛刺现象。

This paper introduces that the DT pulse neutron takes on the waveform with burred feature because of fluctuation of particle statistic when it is measured through the PMT scintillant detector .

用VHDL有限状态机设计了一种用于数字锁相环的数控振荡器，详细分析了解决相位调整和消除“毛刺”的方法，对设计实现过程中应注意的相关问题也作了具体讨论；

It designs a new kind of DCO for DPLL by using VHDL finite state machine , which has the stable performance by testing and application , gives detailed analysis about how to modulate phase and remove burr .

结果表明，该12位DAC在高达60MHz数据更新率下具有低于100pV·s的毛刺脉冲面积。

It has been shown that the 12-bit DAC has a glitch pulse less than 100 pV · s at 60 MHz data updating rate .

我们已经注意到，在新版本RC2里，文件夹和启动器的设置菜单会出现图形毛刺。

It has came to our attention that on the RC2 builds that there are graphical glitches , within the folder and the launcher settings menu .

系统在实现过程中，利用FPGA内部时钟信号clk同步化异步信号，不但充分发挥了FPGA的内部资源，且避免了因信号毛刺可能产生的电路错误。

In the process of implementation , not only FPGA 's inner resources were fully made use of , but also the circuit mistakes caused by signals ' burrs were avoided using FPGA 's inner clock signal to make the asynchronous signals synchronized .