树脂结合剂
- 网络resin bond;resin binder
-
树脂结合剂CBN磨具的磨削性能取决于磨具的修整效果,磨具修整的效果关键在于其修整方向。
Grinding performances of resin bond CBN grinding tools depend on their dressing technique , for which the dressing direction is the most important .
-
CSD金刚石树脂结合剂砂轮的研制与应用
Development of resin bond CSD diamond grinding wheel
-
树脂结合剂CBN砂轮磨削力的试验研究
An Investigation on the Grinding Force with the Resin-Bonded CBN Wheel
-
改善SiC微粉的分散性以及与树脂结合剂的相容性,以提高树脂磨具的使用性能。
And how to prepare the dispersed and compatible SiC powder in order to enhance the application capacity of resinoid abrasive polishing wheel .
-
树脂结合剂CBN砂轮表面状态对磨削比的影响
The Influence of Surface State of Resin - Bonded CBN Wheel on the Grinding Ratio
-
磨粒裸露高度对树脂结合剂CBN砂轮磨削性能影响的研究
Effect of Exposed Height of Grain on the Grinding Performance of Resinoid Bonded CBN Wheel
-
树脂结合剂CBN砂轮低温磨削技术
Cold Grinding with Resinoid Bonded CBN Wheels
-
本文采用声光调QYAG脉冲激光径向辐射,对密实型树脂结合剂立方氮化硼超硬磨料砂轮进行微加工烧蚀修整试验研究。
Experimental study of trimming employs an acoustic-optical Q-swithched YAG pulse laser to radiate in orthogonal direction and micro-machining burn the densely resin bonded CBN super-abrasive wheels .
-
本文就树脂结合剂CBN砂轮的修整方法及其对磨削表面完整性的影响进行了研究。
In this paper , the dressing methods for resin bonded CBNwheels and their effects on ground surface integrity are investigated .
-
树脂结合剂CBN砂轮缓进深磨钛合金&CBN砂轮在缓磨中的应用
Creep Feed Grinding of Titanium Alloy with Resinoid Bonded CBN Wheel & The Application of CBN Wheel in Creep Feed Grinding
-
CBN镀镍产品用于树脂结合剂体系,表面镀层增加了结合剂对CBN晶体的把持力,提高使用寿命。
Electroplated products of CBN CBN-008N With nickel coating , suited for resin bond system to provide longer wheel life while generating lower grinding forces .
-
采用声光调QNd:YAG脉冲激光径向辐照,对树脂结合剂CBN砂轮进行修锐试验研究。
Experimental studies on laser dressing of resin - bonded CBN grinding wheels by an acoustic - optic Q - switched Nd : YAG pulsed laser in wheels radial orientation were earned out .
-
本文研制的CSD磨料树脂结合剂砂轮,与RVD树脂结合剂砂轮相比,有许多磨削性能的优点,值得推广应用。
The authors of this paper developed a new resin bonded CSD grinding wheel . Compared with resin bond RVD grinding wheel , it has much more advantages in grinding .
-
本文采用不同粒度、不同浓度的树脂结合剂金刚石砂轮,对两种典型的特种陶瓷材料ZrO2与Si3N4进行了端面磨削实验研究;
In this paper , two types of resin bond diamond wheels with different grain size and concentration were applied in face grinding of two typical special ceramics .
-
本文从试验和数值模拟两方面对声光调QNd:YAG脉冲激光径向修锐树脂结合剂CBN砂轮进行研究。
Dressing of resin-bonded CBN grinding wheels in orthogonal direction by acoustic-optic ( AO ) Q-switched Nd : YAG pulse laser has been studied from two respects of experiment and numerical simulation in this paper .
-
通过用树脂结合剂金刚石砂轮对Si3N4陶瓷进行磨削试验,从磨削过程中的磨削力、磨削比能、磨削温度及磨削表面的微观形貌变化等方面,综合探讨Si3N4材料的磨削加工机理。
The tests were done , in which the Si_3N_4 ceramics was ground with resin-bound diamond wheel on a precision face grinder , and the grinding mechanism of Si_3N_4 was discussed from the aspects of grinding force , ratio energy , temperature and micro change on grinding surfaces etc .
-
激光修锐树脂结合剂砂轮的试验研究
An Experimental Study of Laser Dressing Process of Resinoid Bonded Wheel
-
光敏树脂结合剂砂轮结合强度的研究
Study on the bonding strength of the grinding wheels using photosensitive resin
-
金刚石砂轮树脂结合剂的性能分析
Analysis on the performances of resinoid bond used in diamond grinding wheel
-
光固化树脂结合剂锯片结合机理及其应用研究
Research and Application on the Bonding Mechanism of the Photosensitive Resin Blade
-
晶须增强光敏树脂结合剂超薄金刚石切割砂轮片的研究
Development of diamond ultrathin dicing blade with Whisker-Enhanced photosensitive resin
-
一种新型金刚石磨具树脂结合剂的制备
Preparation of a New Variety of Resin Bond for Diamond Grinding Wheel
-
聚酰亚胺树脂结合剂金刚石砂轮的制造与应用简介
A briefing of manufacturing and application of polyimide resin bond diamond wheel
-
二步法合成酚醛树脂结合剂的研究
Study of synthesizing phenolic resin binder by two-step technology
-
导电性光固化树脂结合剂锯片的研制
Development of Conductive Photopolymer Resin Bond Dicing Blade
-
耐火材料用酚醛树脂结合剂的改性研究
Study on Modified Phenolic Resin Binders for Refractories
-
纳米粘土改性酚醛树脂结合剂的制备及表征
The preparation and characterization of a resol type phenolic resin anchoring agent modified by nano-montmorillonite
-
树脂结合剂的金刚石砂轮的全自动电热板压机等等。
Resin with a diamond wheel of the Automatic Electric Press , and so on .
-
树脂结合剂砂轮表面形貌的激光扫描测量与分析
Measurement and Analysis of Surface Topography of Resin Bonded Grinding Wheel by Laser 3D Scanning
-
树脂结合剂金刚石砂轮磨削铁氧体陶瓷表面粗糙度的试验研究
Experimental Research on Surface Roughness of Ferrite Ceramics in Grinding with Resin Bond Diamond Wheel