中厚板轧机

  • 网络plate mill;heavy and medium plate mill;medium and heavy mill
中厚板轧机中厚板轧机
  1. 临钢3300mm中厚板轧机简介

    Brief Description of 3 300 mm Medium and Heavy Plate Mill

  2. 中厚板轧机轧辊断裂原因分析

    Analysis of fracture causes of roll used in plate mill

  3. 中厚板轧机液压辊缝控制系统研究及其PLC实现

    Hydraulic Roll Gap Control System of Plate Mill and its Development in PLC

  4. 动态设定型AGC在中厚板轧机上的应用

    Application of dynamic setting AGC on plate mill

  5. 中厚板轧机液压AGC系统的动、静态品质分析

    Analysis of Dynamic and Static Characteristics of Hydraulic AGC System for Medium and Heavy Plate Mill

  6. 介绍了中厚板轧机ACC水冷装置的设备组成及控制过程。

    This article has described the constitution of the ACC water cooling system as well as the control process .

  7. 根据计算结果选取MAS轧制参数,在中厚板轧机上进行了现场生产试验,效果良好。

    The experiments were carried out on a plate mill with parameters selected based on simulation results , and the results were satisfactory .

  8. 针对柳钢2800mm双机架中厚板轧机,自主设计开发了完整的LevelⅡ计算机控制系统。

    An entire Level ⅱ computer control system for 2 800 mm medium and heavy mill of LISCO was independently designed and developed .

  9. 现场的在线应用结果表明:运用给出的辊缝设定模型,可以大幅提高中厚板轧机的辊缝设定精度,为厚度精度的提高和AGC控制打下了良好的基础。

    On-line applications indicate that the gap-set model can improve the precision of set greatly and offer the base to thickness precision improvement and AGC system control .

  10. 基于GRNN神经网络的中厚板轧机宽展预测模型

    Prediction Model of Width Variation of Heavy and Medium Plate Mill Based on Generalized Regression Neural Network

  11. 基于四辊中厚板轧机,分析了温度、头部沉入、AGC系统、压力传感器和展宽比对中厚板头尾厚度超差的影响。

    For plate rolling mill , the influence of slab temperature , head end immersion at biting , use of AGC system , pressure sensor and broadening ratio on oversize in thickness of plate at head and tail ends is analyzed .

  12. 首钢新建3500mm中厚板轧机生产线采用自主设计开发的过程控制系统,在该系统中包括有轧件跟踪功能。

    The process control system developed by us is used on new 3 500 mm Shougang plate mill . In this system , the plate tracking function is included .

  13. 本文简要介绍了舞钢新建3800mm中厚板轧机的产品方案、工艺平面布置和主要工艺装备水平,并论述了该生产线采用的主要工艺和先进技术。

    This paper briefly introduces the product structure , plant layout and main installation level of the 3800 mm medium and heavy plate production line of Wuyang Iron and Steel Co. , Ltd. , and describes the main process and advanced technology of the production line .

  14. 控制冷却技术是生产高质量钢板的有效手段,为满足首钢3500mm中厚板轧机轧后控制冷却设备和工艺的控制要求,采用了基于西门子S7-400PLC的控制冷却基础自动化系统。

    Controlled cooling is an efficient method for product improvement in modern plate production . To meet the control system requirements of the cooling control technical equipment in the 3 500 mm Plate Mill in Shougang Group , a basic automatic system based on Siemens S7-400 PLC is adopted .

  15. 中厚板轧机参数测量及其结果的应用

    Parameter measurement of plate rolling mill and application of measured result

  16. 中厚板轧机轧制力测量传感器原理分析

    Principle Analysis of Rolling Force Measure Sensor in Heavy Plate Mill

  17. 人工神经网络在中厚板轧机轧制力预报中的应用

    Application of Neural Networks to Predict Rolling Force of Plate Rolling Mill

  18. 中厚板轧机轧后加速冷却装置循环水处理控制系统

    Control system of circulating water plant for plate mill 's ACC device

  19. 中厚板轧机两侧刚度差异对辊缝设定的影响

    Influence of Bilateral Stiffness Difference of Plate Mill on Gap-Setting

  20. 1990年全国中厚板轧机生产技术研讨会

    National Symposium on production and technology of plate mill 1990

  21. 中厚板轧机全自动轧钢控制功能的在线实现

    On-Line Implementation of Full Automatic Rolling Control on Plate Mills in Tandem

  22. 四辊式中厚板轧机轧辊轴向窜动初探

    Discussion on Axial Running of roll in 4 - high plate mill

  23. 中厚板轧机工作辊疲劳断裂测算算法研究

    Algorithm study of fatigue fracture calculation for work rolls in plate mill

  24. 中厚板轧机无回缩变精度快速辊缝设定法

    Retraction Less Variable Precision Gap Setting Method of Plate Mill

  25. 中厚板轧机轧辊辊型算法探讨

    Discussion on Algorithm for Roll Contour of Plate Rolling Mill

  26. 中厚板轧机支承辊研制

    Development for Back Roll in Heavy and Medium Plate Mill

  27. 中厚板轧机宽展的神经网络预测

    Width Variable Prediction in Medium Plate Mill by Means of Neural Network

  28. 中厚板轧机工作辊的选择和使用

    Choice and Usage of Work Roll of Heavy and Medium Plate Mill

  29. 降低中厚板轧机辊耗对策的探讨

    Discussion on the countermeasures of reducing roll wear-out failure of plate mill

  30. 中厚板轧机弹跳模型宽度补偿的在线测量法

    On-line measure method about width compensation of spring model of plate mill