高温性

高温性高温性
  1. 与单一的AAO模板相比,AAO/Ti/Si基体具有较高的硬度,较好的耐高温性。

    Compared with the single AAO templates , the AAO / Ti / Si substrates have the properties of good mechanical strength and durability against heat treatment at higher temperature .

  2. 聚苯并恶唑-酰亚胺(polyimide-benzoxazole,PIBO)是聚酰亚胺(polyimide,PI)高分子聚合物的一种,具有优异的耐高温性和耐化学性,除此之外,还具有优异的机械性能和电性能等。

    Poly ( imide-benzoxazole ) is a kind of heterocyclic polymers that exhibit excellent thermal stability and superior chemical resistance . Besides these , they also have high mechanical properties and good electrical properties .

  3. 实验表明,BMI/PF树脂(简称EF)具有优良的耐高温性,其最高分解温度由591℃提高到了637.9℃,并且高温阶段的热失重率变小。

    The results showed that BIM / PF composite material had excellent high temperature resistance that the highest decomposition temperature had been increased from 591 ℃ to 637.9 ℃, and the weight loss rate become smaller at the high-temperature stage .

  4. 聚四氟乙烯(PTFE)具有优良的化学稳定性、耐高温性、低摩擦系数、介电频谱和温谱稳定性以及优异的电气绝缘性能,被广泛应用于航空和电气等领域。

    Polytetrafluoroethylene ( PTFE ) possesses good chemical stability , high temperature resistance , outstanding stability of dielectric properties versus frequency and temperature and excellent electrical insulating properties . As a result , the polymer ( PTFE ) can be widely applied in aviation and electric field .

  5. 聚苯并恶唑-酰亚胺(polyimide-benzoxazole,PIBO)纤维具有优异的力学性能、耐高温性和耐化学性,被广泛用在高性能材料中。

    Poly ( imide-benzoxazole )( PIBO ) fiber exhibits high mechanical properties , excellent thermal stability and superior chemical resistance , so it has been widely used in high-performance applications .

  6. 对杂交粳稻的耐高温性进行了研究。

    High temperature tolerance of hybrid japonica rice was studied .

  7. 比较了耐高温性覆膜砂和易溃散性覆膜砂的性能。

    Based on the results , the feature of high-temperature coated sand and collapse coated sand was compared .

  8. 玄武岩纤维作为一种新型的硅酸盐纤维,具有高强度、高弹模、良好的耐高温性等优良特性。

    Basalt fiber is a new type of silicate fibers which is high in strength , elastic modulus and temperature resistance .

  9. 根据观察结果初步提出了水稻新品种选育中鉴定品种耐高温性的简易方法。

    According to the results of observation poses primarily a simple method to evaluate the high temperature tolerance of rice on breeding .

  10. 与玻璃等刚性衬底相比,柔性衬底的耐高温性较差,电池的沉积温度不能太高,各层材料的沉积温度一般不应超过200℃。

    Flexible substrate has a poor heat resistance , so the deposition temperature should not be too high , commonly below 200 ℃ .

  11. 尤其是铝基复合材料,具有高比硬度、高比强度、耐高温性、高弹性模量以及优良的抗氧化性等突出优点,在工程中被认为最有前途的金属基复合材料。

    SiC particle reinforced aluminum alloy is a kind of special metal matrix composites with enhanced stiffness , strength , wear resistance , antioxidant ability and heat-resistance .

  12. 因其特殊的结构而具有极强的吸附性、流变性、悬浮性、抗盐性及耐高温性。

    Owing to the special structure , it has strong absorbency , rheologic behaviour , suspension property , resistance to salt , and resistance to elevated temperatures .

  13. 新材料不仅具有耐油性,在耐高温性、耐疲劳性和抗永久变形性方面也有较大幅度的提高。

    The new material is not only oil resistant , but also has fairly great improvement in performance of high temperature resistance , fatigue resistance and permanent deformation resistance .

  14. 与有机膜相比,无机膜具有良好的耐高温性和化学稳定性、机械强度大、抗微生物侵蚀、使用寿命长等优点。

    Compared with organic membrane , inorganic membrane has good resistance to elevated temperatures and chemical stability , high mechanical strength , erosion-resistant of microbe and long service period .

  15. 陶瓷材料具有良好的化学稳定性、耐高温性、尺寸稳定性、光漫反射特性等优点,在大功率激光器上有较好的应用前景。

    Ceramic materials have the advantages of good chemical stability , high-temperature resistance , size stability and light diffuse reflection . It has good application prospects in high-power laser equipment .

  16. 碳纤维材料具有强度大、模量高、耐腐蚀性强、耐高温性好等优异性能,在军事和民用等多个领域得到广泛应用。

    Carbon fiber has high strength , high modulus , corrosion resistance , high temperature resistance and other excellent performance , and it is widely used in military and civilian fields .

  17. 采用分子量适中的环氧树脂对反应性有机硅低聚物进行共聚改性,充分利用有机硅树脂的耐高温性和环氧树脂的防腐性及高附着力。

    An epoxy modified silicone resin , which had the features of epoxy and silicone resins , was prepared by the polymerization of epoxy resin with compatible and reactive silicone oligomer .

  18. 对这种固体缓蚀阻垢剂在水中溶解性、分散性、耐高温性、缓蚀效率、阻垢效率进行了研究分析,并从电化学的角度研究了它在金属表面的吸脱附行为。

    A Solid Corrosion and Scale Inhibitor with High Temperature Resistance And its properties such as dissolution and dispersion ability in water , high temperature resistance , scale and corrosion inhibition efficiencies were studied .

  19. 针对电站燃煤锅炉袋式除尘器滤料的长期耐高温性和运行阻力较高的问题,着手研发高效低阻滤料。

    To solve the problem of long term high operating temperature and resistance of filter media , set about researching and developing a new compound filter with performance of higher efficiency and lower resistance .

  20. 堇青石载体的脆性大,强度低,使用寿命低。金属载体的强度高,但耐高温性差,且制备工艺复杂,催化剂涂层附着力差。

    Cordierite carriers show high brittleness , low strength , and short life , and the metal carriers show high strength , but poor high temperature resistance and complicated fabricating process , poor adhesion of catalyst coating .

  21. 例如因为该薄膜具有介孔孔道且有着不错的韧性,故可作为燃料电池的隔膜材料;因其耐高温性,该材料还可能在高温气体分离和高温传感等领域得到广泛的应用。

    This film has a good performance of flexibility and inter-connected wormhole-like channel system , so it could be used as separator in fuel cells . The film could also be used widely in high temperature gas separation and high temperature sensors .

  22. 压裂液种类繁多,目前,90%的压裂液都是水基压裂液,这类压裂液成本低,性能稳定受到青睐,但目前的水基压裂液其抗高温性差,对地层伤害大。

    At the present time , water-based fracturing fluids are popular because of low costs and steady performance , which has the proportion of 90 % . However it performs badly in the high temperature and do damage to the formations which confines its development .

  23. 它较目前广泛使用的隔热性耐热复合材料有许多优点,如可以消除材料间的界面,缓和热应力,具有较高的机械强度,抗热冲击性和耐高温性(达2000℃)等。

    FGM has many superior properties such as eliminating interface crack between the two materials , reducing the thermal and residual stress , thermal barrier , thermal shock resistance , anti-corrosion , increasing the bonding strength and toughness , high-temperature strength ( to 2000 C ) etc.

  24. 所以从生长、生理状态相对一致的苗期或营养生长期寻找与开花期耐高温性密切相关的内在生理反应差异指标,有可能形成一种检测水稻资源的耐高温性评价方法。

    Therefore it is possible to form a evaluation method to detect the heat tolerance of rice resources in the seedling or the vegetative growth stage to find closely related to the different indicators of internal temperature physiological responses which have relatively uniform growth and physiological state .

  25. 含Nb、V、Ti钢连铸坯中碳、氮化物的析出及钢的高温塑性

    Carbide and Nitride Precipitation and Hot Ductility of Continuous Cast Steel Slabs Containing Nb , V , Ti

  26. 渗碳处理提高TiAl基合金高温抗氧化性

    Improvement of oxidation resistance of TiAl based alloy at the elevated temperature by carburization

  27. 全层片状组织的TiAl基合金高温塑性的研究

    Study of Plasticity of TiAl - Based Alloy with Full - Lamellar Microstructure at Elevated Temperature

  28. 液相Al-Si共渗提高Ti3Al基合金高温抗氧化性

    Improvement on high-temperature oxidation resistance of a ti_3al-based alloy by liquid-phase silicon-aluminizing

  29. 钢中锰可改善钢的高温塑性,高w(Mn)/w(S)对减少纵裂有利。

    Adding manganese can improve the plasticity of steel , and high Mn / S is in favor of reducing the risk of longitudinal surface cracking .

  30. 在相同的实验条件下,CrN涂层的高温耐磨性低于TiN。

    In the same experimental condition , abrasive resistance of CrN coating was lower than that of TiN coating .