高固体分涂料

  • 网络high-solid coating;high solid coating
高固体分涂料高固体分涂料
  1. 高固体分涂料用丙烯酸酯共聚物

    Acrylate copolymer for high solid coating

  2. 高性能氟碳聚醚聚氨酯高固体分涂料

    High performance fluorocarbon polyether urethane high solid coating

  3. 介绍了国内一些高固体分涂料研究的最新成果。

    New achievements obtained in studying high-solid coatings in China are introduced .

  4. 可厚涂高固体分涂料的研究及其应用

    Study of a high build and high solid coatings

  5. 高固体分涂料的应用与发展

    The progress and application of high solid coatings

  6. 高固体分涂料现状及其发展趋势

    Present Situation and Development Trend of High-Solid Coatings

  7. 水性涂料和高固体分涂料的发展,以及国际上钛白短缺,导致了精细填料在涂料中大量就用。

    The development of water-borne and high-solid paints , and the lack of TiO_2 in the world have promoted the adoption of fine fillers in paints in a great quantity .

  8. 研究了可厚涂高固体分涂料的固化和流挂的控制途径,及其在汽车涂装中的应用,以达到保护环境、节能的目的。

    Aiming at environmental protection and energy saving , the curing process and sagging control , and application in automobiles of a high build and high solid coatings have been studied .

  9. 介绍近年世界各地区涂料产量,以及适合环保要求的粉末涂料、水性涂料、高固体分涂料、辐射团化涂料的发展概况。

    Amounts of world coatings production were disclosed . The development of those environment-loving coatings , such as powder coatings , water-based coatings , high-solid coatings and radiation-cure coatings were introduced .

  10. 分别从汽车涂料使用的底漆、中涂漆、面漆三方面综述了水性涂料、粉末涂料、高固体分涂料在汽车涂装体系中的应用。

    The article has reviewed the application of waterborne coatings , powder coatings and high solid coatings for finishing of automobiles , in terms of three aspects of primer , inter-coat and topcoat .

  11. 从高固体分涂料与常规溶剂型涂料的差异入手,分析了高固体分涂料涂膜流挂、橘皮、抽缩、缩孔等表面缺陷的成因。

    Basing on the difference between high-solid coatings and traditional solvent-borne coatings , it analyzes the reasons of film surface defect forming such as sagging , orange skin , casing and cratering and etc.

  12. 在工业涂料中,将逐步扩大水性涂料、高固体分涂料、粉末涂料、无溶剂涂料和辐射固化涂料所占的比例。

    In industrial coating , the coating of cent of coating of escalate ability in swimming , will tall solid , coating , proportion that holds without solvent coating and place of radiation solidify coating .

  13. 概述了汽车面漆涂料技术的发展及应用现状,展望了今后水性涂料、粉末涂料、高固体分涂料在汽车面漆方面的发展动向及应用前景。

    This article has reviewed the development and current application of automotive top-coat , and drawn up the development trend and application future of the waterborne coatings , powder coatings and high solid coatings for automotive top-coat .

  14. 论述了液体无溶剂型环氧涂料(包括高固体分涂料)和环氧粉末涂料的配方设计,以及基料、固化剂、稀释剂、颜填料和助剂的选择原则。

    The formulation design of liquid solventless epoxy paint ( as well as high solid paint ) and epoxy powder coating were introduced . The principles of selecting binders , hardeners , diluents , additives and pigments and fillers were discussed .

  15. 着重讨论了几类环境友好涂料的研究进展,如乳液型超耐候外墙建筑涂料、水性金属防腐涂料、现代木器家具涂料、高固体分涂料、粉末涂料以及环境净化功能涂料。

    The research progress of several environmentally friendly coatings , such as emulsion architecture coatings , water-borne metal corrosion-resistant coatings , modern wood coatings , high solids content coatings , powder coatings and special functional coatings , are discussed in detail .

  16. 抗酸雨性优良的丙烯酸高固体分汽车涂料

    Acrylic high-solids automobile paint with good sour-rain resistance

  17. 简要介绍了低溶剂、污染的高固体分航空涂料的发展概况。

    This paper reviews the development situation of high-solid aviation coatings with low solvent content and low pollution .

  18. 结合实际操作要求,从表面处理、喷涂设备、涂料调配、喷涂方式等方面总结了高固体分航空涂料操作的关键控制点。

    And from practical operation demands , summaries key controlling points of the application basing on surface treatment , spraying equipment , coatings preparation and spraying methods .

  19. 纳米SiO2在高固体分聚酯聚氨酯涂料中的应用

    Application of Nano-Silica in High Solid Polyester / Polyurethane Coatings

  20. 介绍了高固体分丙烯酸汽车涂料的制备和性能。

    Preparation and performance of high solid acrylic polyurethane automotive coating are introduced .

  21. 自干高固体分醇酸树脂涂料

    Air dry high solid alkyd resin coating

  22. 详细阐述高固体分醇酸树脂涂料、环氧树脂涂料、聚酯树脂涂料、丙烯酸树脂涂料以及聚氨酯涂料的特点和应用。

    The characteristics and applications of high-solid alkyd coatings , epoxy coatings , polyester coatings , acrylate coatings and polyurethane coatings are specifically discussed .

  23. 高固体分脲醛树脂涂料的研究

    Study on high solid urea-formaldehyde resin paint

  24. 高固体分丙烯酸聚氨酯汽车涂料

    High-solid acrylic - polyurethane automotive paint

  25. 玻璃鳞片防腐蚀涂料是五十年代末开发的新型高固体分重防腐蚀涂料。

    Glass-scale paint is a high-solid heavy duty anticorrosion paint that was developed in late of 50s ' .

  26. 介绍国际汽车涂装新型低污染涂料&水性漆、高固体分漆及粉末涂料的开发研究和应用动态。

    The worldwide trends on researches , developments and applications of environment-loving car finishes , i.e.waterbased , high-solids and powder coatings , were outlined .

  27. 叙述了高固体分脲醛树脂涂料的制备方法。该涂料是水溶性的脲醛树脂齐聚物,在固体含量高达95%时,涂4杯粘度仅150秒左右。

    It presented the production of high solid urea-formaldehyde resin paint , which was made based on a water-soluble urea-formaldehyde oligomer , the viscosity ( Ford cup 4 ) being only about 150 seconds when NV reaches 95 % .