高压柱塞泵

ɡāo yā zhù sāi bènɡ
  • high-pressure plunger pump
高压柱塞泵高压柱塞泵
  1. 方坯液压剪高压柱塞泵损坏原因分析

    Reason Analyses for the High-pressure Plunger Pump Damage in the Billet Hydraulic Shearing Machine

  2. TFA编织成形填料在高压柱塞泵中的应用

    TFA Braided Formed Packing Used in High Pressure Plunger Pumps

  3. 德国URACA、WOMA高压柱塞泵及整套清洗设备;

    URACA and WOMA plunger pumps and all the cleaning machine ;

  4. 改善高压柱塞泵的软填料密封

    Improvement of soft packed seal for high pressure plunger pump

  5. 浓硝酸高压柱塞泵的改造

    Retrofit of High Pressure Plunger Pumps for Concentrated Nitric Acid

  6. 变频调速器在高压柱塞泵上的应用

    Application of frequency speed controller on high-voltage plunger pump

  7. 管路密封件和高压柱塞泵密封的改造

    Sealing Improvement on Pipeline and High-pressure Plunger PULSE PUMP

  8. 高压柱塞泵性能测试系统软件的开发

    A Computer Software for Reciprocating Pump Performance Testing System

  9. 高压柱塞泵往复密封性能及机理的研究

    Investigation on the performance and mechanism of reciprocating seal for high pressure plunger pump

  10. 一种新型液压式高压柱塞泵

    New Type of Hydraulic High Pressure Piston Pump

  11. 履带车辆无级转向用液压元件&高压柱塞泵摩擦副研究

    Tracked Vehicle Stepless Steering Hydraulic Component-The Study of the Sliding Friction pair for Piston Pump

  12. 基于高压柱塞泵噪声产生的机理分析与振动频率的计算,找出产生噪声的根源;对实验测得频谱曲线进行频谱分析表明,改进后的高压柱塞泵的噪声得到了明显地改善。

    The source of noise in the high pressure plunger pump is identified through frequency spectrum analysis and measurements show significant reduction of noise in the improved plunger pump .

  13. 介绍了引进硫酸精制装置中玻璃管路密封件以及高压柱塞泵密封结构的改造。

    The transformation on sealing components of glass pipeline in import sulphuric acid refine device from abroad and sealing structures of the imported high pressure plunger pump is introduced .

  14. 介绍了电动往复式高压柱塞泵和液压驱动往复泵的结构特点,分析了能量回收机的工作原理。

    Author has introduced the structure features for the reciprocal high-pressure plunger pumps electrically driven and the hydraulically driven reciprocal pumps ; analyzed the working principle of energy recovery machine .

  15. 高压柱塞泵作为一种常规分析仪器在计量、石油和化工等领域有着广泛的应用,用于实现流体驱替和计量控制,是计量、岩芯分析实验等研究工作中的重要实验装备。

    As a kind of normal analytical instrument , high pressure lobe pump is applied on the area of measure , petroleum and chemistry for liquid driving out , measure control and analyzing for rock core .

  16. 高压径向柱塞泵中滑靴结构参数的确定

    Determining the Slip-boots Structural Parameter of the High Pressure Radial Piston Pump

  17. 超高压径向柱塞泵的试验研究

    Experiment and Research on Ultra-high Pressure Radial Piston Pump

  18. 单配油阀高压径向柱塞泵容积效率分析

    Efficiency Analysis of High Pressure Radial Piston Pump with One Oil Distributing Valve

  19. 本章对两种美国高压三柱塞泵的结构和材料选用作了介绍。

    This paper presents the construction and the material selection of two kinds of the U.

  20. 高压轴向柱塞泵配流盘减振结构的研究斜盘式轴向柱塞泵的结构模态、振动传递通道和振动响应分析

    Investigation into shock absorption structure pump Structural Modes · Vibration Transmission Paths and Vibrational Responses of Swash-plate Piston Pump

  21. 第四章,采用对某轴向柱塞泵进行全面性能测试的方法来验证该高压轴向柱塞泵性能测试系统的性能。

    In chapter 4 , through a comprehensive performance testing of an axial piston pump to verify the capabilities of the high-pressure axial piston pump performance test system .

  22. 本文分析了高压轴向柱塞泵降噪效果欠佳的原因,提出了提高降噪效果的设计准则和应注意的问题。

    This paper analyzes the cause of poor noise-reduction effect of high pressure axial piston pump , and puts forward design criterion and attention points of improving noise-reduction effect .

  23. 在保证测试系统通用性的情况下,本学位论文以工程机械中常用的某双联轴向柱塞泵为测试对象设计了该高压轴向柱塞泵性能测试系统。

    Ensuring the generality of this test system , taken the double axial piston pump , which is widely used in mobile machinery , as the test object , a high-pressure axial piston pump performance test system was designed in this thesis .

  24. 本文提出了一种超高压轴向柱塞泵&多级串联端面配流全开路式轴向柱塞泵原理,并进行了双级泵的试验研究,从理论和实践上验证了其原理的正确性。

    Principles of a kind of super high pressure axial piston pump , multistage valve plate distribution open circuit axial piston pump , were put forward and a two-stage prototype had been tested and studied so that validity of principles in theory and practice was proved .

  25. 本文对该摩擦副建立的压力场进行了分析,得到了挤压承载力的计算公式,为高速高压轴向柱塞泵的设计提供了一定的理论依据。

    An analysis was carried out to the pressure distributing of this friction pair , and the formula of extrusion support force was set up , which may serve as a fundamental basis for the design of the axial piston pumps with high speed and high pressure .

  26. 高压纯水轴向柱塞泵的结构分析

    Structure Analysis of High Pressure lap Water Hydraulic Axial Piston Pump

  27. 高压水压轴向柱塞泵特性试验

    Per for mance Test on High - Pressure Water Axial Piston Pump

  28. 用该试验台对某排量为25.3mL/min的高压水压轴向柱塞泵进行了动静特性和吸水能力试验。

    A high-pressure water axial piston pump with an output capacity of 25 . 3 mL / m in was tested on the test rig .

  29. 高压低噪声径向柱塞泵JBP系列产品的结构特点及性能指标

    Design Features and Performance Specifications of JBP Series High Pressure , Low Noise Radial Piston Pump Products

  30. 高压与超高压柱塞泵

    High and ultra-high pressure plunger pump