靶材

强脉冲CO2激光与靶材在空气中的相互作用

Interaction of high intensity co_ 2 pulsed laser with target in air

采用超声成像方法对微电子器件镀膜靶材钎焊质量进行检测，获得其A扫描和C扫描图像。

Ultrasonic imaging technique was adopted to evaluate the joining quality of a target assembly used in microelectronic technology .

提高DC平面磁控溅射中靶材利用率的新方法

A New Method to Increase the Utilization Factor of Target by DC Planar Magnetron Sputtering

YBaCuO超导薄膜溅射靶材的研制

Study of Sputtering Target For Y Ba Cu O SuperConducting Film

源极的靶材用Ti、Al、不锈钢制做。

The target of source is made of Ti , Al . stainless steel .

激光分子束外延工艺用ZnO陶瓷靶材的研究

Study of ZnO ceramic targets used in laser molecular beam epitaxy Technology

烧结温度对冲击磨用Al2O3陶瓷靶材性能的影响

Effect of Sintering Temperature on Performance of Ceramic Target with Al_2O_3 to Impact Mill

掺杂量对ZnO陶瓷靶材性能影响的研究

Study on Effect of Doping Content on the Performance of ZnO Ceramic Target

高纯Er2O3靶材的低温无压烧结及性能研究

Low-temperature Nonpressurized Sintering and Performance of High-purity Er_2O_3 Target Material

石墨靶材电流对Ti（C，N）多层膜微观组织及力学性能的影响

Effects of Graphite Target Current on Microstructure and Mechanical Properties of Ti ( C , N ) Multilayer Film

放电等离子烧结Bi2O3/Cu复合梯度靶材

Preparation of Composite Graded Bi_2O_3 / Cu Target by Spark Plasma Sintering

调Q激光作用水中靶材表面引起的力学效应分析

Analyses of the Mechanical Effect on the Target in Water Induced by a Q-switched Laser

所做的主要工作及结论如下：（1）制备掺杂Fe元素的ZnO靶材。

The work done and conclusions are as follows : ( 1 ) Prepared Fe-doped ZnO targets .

主要用于制作ITO靶材、合金及光电元器件等。

Mainly used in ITO target , alloy and photoelectricity components .

ITO靶材在磁控溅射过程中的毒化现象

Poisoning Phenomenon on the Surface of ITO Target During DC-Magnetron Sputtering Process

ITO靶材热等静压致密化工艺研究铟锡氧化物陶瓷靶材热等静压致密化研究

Investigation on hip technique for densification of indium tin oxide ceramic target

从ITO靶材废料中回收提取金属铟工艺的研究

The Study of Recovering Metal Indium from the ITO Target

国产ITO靶材的镀膜工艺研究

Studies on film plating process of domestic ITO target

铟锡氧化物（ITO）粉体及高性能ITO靶材的制备与研究

Preparation of Indium Tin Oxide ( ITO ) Powders and High-quality ITO Target

冷等静压-烧结法制备ITO磁控溅射靶材的工艺研究

Study on Technology for Preparation of ITO Target by CIP and Sintering Process

铟锡氧化物（ITO）靶材的应用和制备技术

Preparation Technologies and Applications of the Indium Tin Oxide ( ITO ) Targets

选择合适的靶材以减小X射线对铍材的穿透深度，可以减小应力测试的误差。

The error of stress measurement can be decreased by selecting proper target to decrease the penetrate depth of x ray into beryllium .

AZO透明导电氧化物靶材及其薄膜制备的研究

Research on Manufacture of AZO Transparent Conductive Oxide Targets and Its Films

MgxZn（1-x）O：Al靶材制备工艺和Mg掺杂对微观结构的影响研究

Research on Preparation of Mg_xZn_ ( 1-x ) O : Al Target and Influence of Mg Doping on the Microstructure

PZT陶瓷靶材的制备及相成分分析

Preparation and Phase Analysis of PZT Ceramic Targets

ITO纳米粉末爆炸压实烧结致密化陶瓷靶材研究

Investigation on Densification of ITO Ceramic Target by Using Exploring-Compression and Sinter Nano-powder Technique

ITO靶材黑化的因素浅析

Analysis on the factor of ITO Blacken target

以金属钛为靶材，采用射频磁控溅射方法制备纳米晶粒TiO2薄膜。

Nano-grain TiO_2 thin films are fabricated by magnetron sputtering process from a pure 99.99 % Ti disk .

采用XRD，SEM等测试方法表征了靶材的物相组成，表面形貌。

XRD , SEM and other testing methods were used to characterize the phase composition and surface morphology of the target .

红外光学薄膜材料ZnS靶材的研制

A new technique for the preparation of an infrared optical film material-ZnS target