隔离电源

  • 网络Isolated power supply;DC-DC
隔离电源隔离电源
  1. 利用高压隔离电源和隔离驱动技术,设计了上述串联MOS管开关的驱动器。

    Use of high-voltage isolated power supply and isolation drive technology , we designed a series MOS transistor switch drive .

  2. 采用磁集成技术实现的CUK式低纹波隔离电源

    CUK High Power Density Low-Ripple Power Supply Isolation by Using Magnetic Integration Technology

  3. 为解决以上问题,对负载端直流-直流(DC-DC)电源模块进行研究,提出一种新的本安型DC-DC隔离电源模块的设计方案。

    In order to solve the above problems , a study on the DC-DC power modular of the loading terminal was conducted and a new design plan of the intrinsic safe DC-DC isolated power modular was provided .

  4. VC-700系列中配置了超高分辨率的彩色摄像头,摄像头的电源为隔离电源,并安装了自动调焦的镜头。

    The VC-700 series includes a super-high-resolution color camera with an isolated power input and a varifocal , auto-iris lens .

  5. 医学电子仪器关系到患者生命安全,本治疗仪对与患者接触的肌电放大电路和电刺激电路采用了DC-DC隔离电源供电设计的措施,以满足医学电子仪器安全行业标准要求。

    Medical electronic instrument relates to life and safety of patient . The instrument takes measure as DOto-DC isolated converter providing power for EMG amplifier and electrical stimulation circuit which touch body of patient directly , in order to comply with safety standard of medical electrical industry .

  6. 两线制变送器微功率隔离电源设计

    Design of Micro-power Isolated Power Supply of Two-wire Transmitter

  7. 采用微功率隔离电源供电;

    Micro - power isolated power supply is adopted .

  8. 精密仪表用隔离电源系统设计

    Design of A Power Supply System in Precise Instrument

  9. 设计了隔离电源模块,可有效增强系统的安全性。

    The design of an isolation power supply module makes the system much safer .

  10. 限流器用多输出隔离电源负载谐振模式研究

    Research on Load Resonant Mode of Multiple-output Isolated Power Supply used in Current Limiter

  11. 该肌电引导仪采用独立的隔离电源,肌电信号也采用隔离传输的方式,整个仪器完全符合医学仪器的电气安全。

    The electromyogram-lead instrument use absolute isolated power supply and the signal transform is also isolated .

  12. 本文分析了心电图机中浮地电路的隔离电源,隔离信号两部分线路。

    This paper describes the suppositional grounding circuit of isolation power and isolation signal of the electrocardiography .

  13. 本文讨论的是一种新型多输出隔离电源在固态短路限流器中的应用。

    This paper presents a new kind of power supply with isolated and multiple outputs , which may be applied to the solid state fault current limiter .

  14. 利用反激式电源提供的多路隔离电源,设计出基于斩波恒流驱动方式的驱动器。

    Using isolated multi-channel power supply provide by flyback power source , the driver system is developed based on the mode of constant circuit with chopped wave .

  15. 使用了高性能的隔离电源、磁隔离芯片和光电耦合器,实现了对计数器的完全隔离,起到了很好的抗干扰效果和电气隔离作用,可以实现数据高速传播。

    High-performance isolation power supply , magnetism isolation chip and photoelectricity coupler are employed to accomplish high-speed transmission for data , which improve the noise restraint and electric isolation .

  16. 设计和研制了一种新颖的、具有双变压器结构的工频隔离电源,通过互补抵消的作用,巧妙地实现了使输入、输出达到低噪声、低共模干扰的目标。

    A novel isolated power supply with the structure of double transformers was developed for lower input / output noises and lower common mode interferences , capitalizing on the effects of complemental counteraction .

  17. 本课题为电流型高电压隔离电源,它是基于交流电流母线的分布式系统,能够整定短路电流,适应高电压工作环境的隔离电源。

    This paper purposes an isolated high-voltage current source power converter . It is a distributed power system , based on the AC current bus , capable of setting short-circuit current and working for high-voltage isolation purpose .

  18. 电源设计上,采用推挽式拓扑结构,经变压器变换得到两组隔离电源分别用于数字电路部分和模拟电路部分供电,不仅提高电路可靠性,也避免数字电路噪声影响模拟量测量精度。

    In the power supply design , two groups of isolated power - analog and digital-are obtained through the transformer in the use of push-pull transform structure , which not only improves the circuit reliability , but also avoids the digital circuit noise impact on the analog measurement accuracy .

  19. IV型交直流隔离供电电源采用交直流隔离供电技术可以有效的避免由于电源引入的雷击事故。

    LN-GDXT-IV ac-dc isolated power supply can avoid lighting stroke effectively by using the ac-dc isolation technology .

  20. 开关电源输出隔离的电源分别给IPM的驱动电路、DSP控制电路、传感器以及冷却风扇供电。

    The switching power supplied insolated DC power to IPM , DSP control circuits , sensor and cooling fans .

  21. 其次,在第二章中对于电流型高压隔离驱动电源总体结构进行了介绍,针对二次侧电路,基于线性电路的缺点提出了电流型PWM开关变换器的概念。

    For modifying the weakness of linear circuit , the concept of current type switching mode converter of the secondary-side is extracted first time .

  22. 本文所介绍的电流型高压隔离驱动电源以及提出的二次侧PWM开关型电路能够很好的满足这些要求。

    Current type High-voltage and isolated drives power supply and switching mode converter of the secondary-side presented first time in this paper can satisfy these requirement .

  23. 在非隔离开关电源电路中,随着输出电压的不断降低,BUCK电路占空比很小,已难以适合未来低电压大电流时电压调整模块(VRM)的需求。

    With the sharp drop of the output voltage , the duty ratio is much smaller in the conventional buck topology which can 't meet the stringent requirement of low voltage and large current in the application of the voltage regulator module ( VRM ) .

  24. 级联型逆变器具有开关冗余和隔离直流电源冗余。

    There are switch redundance and dc source redundance in cascaded inverter .

  25. 双层客车用中频电位隔离的电源

    Power supply of double-deck cars with medium-frequency electrical isolation

  26. 直流&直流数字非隔离开关电源的研究与应用

    DC-DC Digital Non-isolated Switching Power Supply Research & Application

  27. 新型高压隔离驱动电源的相平面分析及优化

    State Plane Analysis and Optimization of a Novel High-voltage Insulation Drive Power Supply

  28. 光纤在600KV高压中频隔离供电电源中的应用

    Application of optical fiber in 600 kV high voltage medium frequency isolated power supply

  29. 关于隔离开关电源几个问题的探讨

    Discussion of Some Problems about Isolator Power Supply

  30. 随着电压等级的增大,输出路数的增加,对这种多路输出的高压隔离驱动电源的要求也越来越高。

    The requirement that comes from High-voltage and isolated drive power supply becomes strict than before .