铸造锌合金

新型高强度铸造锌合金ZA27

A New High Strength Zinc Foundry Alloy-ZA-27

采用钛、硼盐类变质可有效地细化高铝铸造锌合金ZA-27的初生α'相晶粒，显著提高合金的塑性、韧性。

The effective grain refinement of high-aluminium zinc foundry alloy ZA-27 has been achieved by using salt inoculants containing titanium and boron , resulting in remarkable improvement in the ductility and toughness of the alloy .

在DM3.0和DM3.0S都建立了坚实的铸造锌合金机身，钢网罩和内部球弹出屏幕。

The DM3.0 & DM3.0S are built with a solid cast zinc alloy body , steel mesh grille ball and internal pop screen .

高铝铸造锌合金减振性能的试验研究

An investigation of the Damping Capacity of High-Aluminium Zinc Foundry Alloys

光电直读发射光谱法分析铸造锌合金

Analysis of Zinc Alloy Ingots for Casting by The Optical Emission Spectrometry

生产铸造锌合金锭之管见

Humble Opinion on the Production of Cast Zn Alloy Ingot

铸造锌合金在冷冲压模具中的应用

Application of casting zinc-base alloy to cold forming dies

高强度铸造锌合金在干摩擦条件下摩擦磨损特性之研究

Investigation on Friction and Wear Performances of High-Strength Zinc Foundry Alloys under Dry Friction Condition

GB/T8738-1988铸造锌合金锭

Zinc alloy ingots for casting

原子吸收光谱法快速连续测定铸造锌合金中铜、镁、铁、铝

Rapid , Successive Determination of Copper , Magnesium , Iron and Lead in cast zinc alloy by AAS

本课题对铸造锌合金石墨复合材料的制造工艺、力学性能和摩擦特性、金属石墨界面状态等进行了研究。

The manufacturing process , mechanical and tribological properties , metal-graphite interface status etc. to cast zinc-graphite composite have been studied in this paper .

ZA&27是国外近年来研究出来的很有发展前途的一种新型高强度铸造锌合金。

ZA-27 is a new zinc foundry alloy being developed abroad in recent years . It is a promising alloy because of its high strength and other adventages .

铸造锌铝合金的一次结晶和组织特点

The primary crystallization and structure of zinc - aluminium foundry alloys

一种新型涡轮材料&铸造锌铝合金

A new type of turbine material ── casting Zn-Al Alloy

铝-铜-镁铸造锌基合金的开发和试产

Development and Trial Production of Al-Cu-Mg-Zinc Base Casting Alloy

高强度铸造锌基合金的研制

Manufacture of High Strength Cast Zinc - Base Alloy

铸造锌铝合金稀土变质机理的电子理论研究

Electronic theoretical study on the modification mechanism of rare earth elements in zinc-aluminum cast alloys

粒子增强铸造锌基合金复合材料的力学及摩擦磨损特性

The Mechanical Properties , Friction and Wear Characteristic of Casting Zinc-matrix Composites Reinforced with Particles

论述了利用石膏型铸造锌基合金模具的整个工艺过程。

The whole technology process for casting the zinc base alloy patterns by plaster mould is also discussed .

是一家专业铸造锌基合金、铝基合金鞋模的厂家。

It is the manufacturer that a major casts model of shoe of zincic radical alloy , aluminium radical alloy .

介绍了铸造锌基合金元素的行为，对关键工序的工艺方法进行了选择和确定，并确定了工艺流程。

This paper introduces the behaves of element casting Zinc base alloy , makes a selection and determination of key procedure and determines the process flow .

本文就高强度铸造锌基合金的化学成分、热处理工艺等对力学性能及金相组织的影响进行了探讨。

This article has made an approach on the influence of chemical composition , and heat treatment process of high strength cast zinc-base alloy to the mechanical properties and metallography structure .

试验表明，该涂料可用于消失模铸造铜锌合金件、碳钢件，而且成本低廉，实用性强，具有良好的推广价值。

The experimental results show that the water-based coating is applied to lost foam casting of the carbon steel and copper zinc alloy , and has lower lost , higher practicability and better promotion value .

以含铝量为36%～50%的铸造锌基合金为研究对象。重点探讨铝量、铜量、稀土量和镁量对合金力学性能和磨损性能的影响。

Stress is laid upon the study of the effect of aluminum , copper , rare earth elements and magnesium contents on the mechanical properties and wear resistant behavior of the casting zinc alloys containing 36 % ~ 50 % Al .

稀土元素Nd在铸造镁-锌合金中的晶粒细化作用

Effect of Trace Nd in Magnesium Zinc Alloy

铸造高强锌基合金ZA－27的挤压加工

Extruding Work of High Strength Casting Zinc-Based Alloy ZA - 27

铸造锌铝系合金底缩现象探讨

Discussion on Bottom - Shrinkage in Cast Zn-Al Alloy

铸造锌铝共析合金的超塑性处理及应用

Superplastic Treatment and Application of Cast Zn-Al Eutectoid Alloy

讨论了挤压铸造铝合金、锌合金、镁合金及其复合材料的研究进展；

Aluminum , zinc , magnesium alloys and their composites in squeezing casting were approached .

研究指出，直接由铸造的锌铝共析合金进行超塑性处理，也可以得到超塑性。

It was found that the superplasticity was also obtained directly by superplastic treatment of the cast Zn-Al eutectoid alloy .