辅助加热

高能中性束注入（Neutralbeaminjection，NBI）是核聚变装置托卡马克采用的芯部辅助加热和非感应电流驱动主要手段之一。

High energetic neutral particle beam injection ( NBI ) is one of most important methods for core auxiliary heating and non-inductive current drive of plasma in nuclear fusion devices .

HL-1M装置的主要物理目标是开展兆瓦级功率的辅助加热和低混杂波电流驱动研究。

The main physics objectives of HL-1 M is to carry out investigations on MWs power auxiliary heating and current drive with lower hybrid wave .

文章仅以煤气锅炉辅助加热的热管太阳能集中供热水系统为例，探讨PLC可编程智能全自动控制器在太阳能集中供热水系统的应用。

This article , taking as an example the central heating system with solar energy assisted by gas boilers , has probed into the application of programmable automatic intelligent controller in the system .

用可编程控制器PLC控制空气源热泵、蒸汽辅助加热装置等，配合太阳能集热装置，实现对洗浴用水加热过程的控制，达到了环保、节能的运行效果。

The use of programmable logic controller ( PLC ) to control air source hot pump , steam auxiliary heating device etc to fit with solar heat collection device , fulfills control for bath water heating process , achieved environmental protection and energy saving operation effect .

本文介绍了该装置上中子辐射剂量率的测量方法以及在欧姆、波辅助加热、长脉冲等放电模式下的剂量率特点，并且给出了X与γ射线的总辐射剂量测量方法和分析结果。

Briefly introduces the measuring method for neutron dose rate on HT-7 , and presents the neutron radiation characteristics under Ohmic , wave heating and long pulse operation mode . The measuring methods of X and γ ray radiation doses and the analysis results are also presented .

辅助加热PCVD-TiN薄膜的制备及影响因素

Preparation of Auxiliary Heating PCVD TiN Coatings and Their Effect Factors

沉积电压对辅助加热PCVD-TiN涂层的影响

The Effect of Deposition Voltage on Auxiliary Heat PCVD - TiN Coatings

研究了不同的沉积电压对辅助加热式PCVD-TiN涂层的影响。

The effect of deposition voltage on auxiliary heat PCVD-TiN coatings has been studied .

描述了HL-2A装置供电系统，该系统主要由三套飞轮脉冲发电机组、磁场电源系统和辅助加热高压电源系统组成。

The HL-2A tokamak power supply is presented . Three flywheel motor-generator ( MG ) sets with several converters and high voltage power supplies are used for the magnetic coils and the auxiliary heating .

研究表明，微波辅助加热可以有效地提高反应效率，反应中的微波辐射功率以500～700W为宜；

The result indicated that reaction efficient could be improved with the use of microwave in the heating process . The optimum microwave power was 500 ~ 700 W.

本文对托卡马克工程试验混合堆（简称TETB）过渡阶段的电流驱动、辅助加热和加料，以及等离子体物理参数随时间的变化进行了理论分析和研究，建立了描述该过程的物理模型。

Current drive , auxiliary heating , fueling and time evolution of the plasma parameters have been studied numerically for the ignition and the shut-down phases of the Tokamak Engineering Test Breeder ( TETB ) . A code which describes these processes has been developed .

太阳能辅助加热土壤源热泵系统理论分析

The theory analysis of solar assisted ground source heat pump

微波辅助加热氧化锰的还原动力学研究

Study on Kinetics of Reduction of Manganese Oxide with Microwave Assistant Heating

电辅助加热在玻璃熔炉中的应用

The Application of Electric Boosting in the Glass Tank Furnace

微波辅助加热技术在无机材料中的应用

The application and status of microwave-assisted firing technology in the inorganic materials

研究了微波辅助加热下合成苯偶姻。

The synthesis of benzoin under the condition of microwave-assisted heating was studied .

HL－1装置辅助加热等对能量约束的影响

Effects of ecrh , PI & LHCD on plasma energy confinement in HL-1 TOKAMAK

微波辅助加热技术的应用及现状

The Application and Status of Microwave-assisted Firing Technology

大中型太阳能浴室工程辅助加热设备设计

Auxiliary Heat Equipment Design of Engineering on Big or Middle Bathroom of Solar Energy

空气源热泵辅助加热太阳能热水系统热性能研究

Thermal Performance Study on a Solar Energy Water Heating System in Conjunction with Air-source Heat Pump

辅助加热温度受到敲缸与部分燃烧现象的制约，应当精确控制。

Heating temperature for intake air should be regulated precisely with the limitation of knock and partly combustion .

利用电磁感应辅助加热挤压膨化机对植物秸秆进行了膨化加工试验。

The authors have done the experiments to get expanded plant straw utilizing electromagnetic induction heat the extruder .

介绍了地下土壤的热平衡问题，采用太阳能辅助加热的混合式地源热泵系统是有效的方法。

This paper introduces heat balance problems of underground soil , effective method of mixed GSHP for solar energy .

设计了一套太阳能集热器辅助加热系统，研究了其使用效果。

Design a solar water heater auxiliary-heating system in experiment greenhouse , and study on it 's using effect .

借助修改已建立的有限元数值模型，探讨了利用激光辅助加热的方法改善焊接温度场的可行性。

Various finite element models are established to simulate different welding phases of temperature field , stress field and strain field .

中性束注入加热是可控核聚变主要的辅助加热方式之一。

Neutral beam injection ( NBI ) heating is one of the main auxiliary heating methods in controllable nuclear fusion experiment .

HL－1M装置的运行结果表明，第一壁能满足辅助加热实验的要求。

Service operation shows that the first wall design satisfies the needs of physics experiment , especially for plasma heating experiments .

重点讲述了解决这种热失衡的两种方案，即太阳能辅助加热和冷却塔辅助冷却。

Two plans to solve the problems were put forward , namely solar energy assistance heating and cooling tower assistance cooling .

供大专院校、工矿企业和科研单位精密恒温和辅助加热或制冷之用。

It is applicable to exact constant temperature and calefaction or refrigeration on the college , industry mine and scientific research institute .

与水热法相比，微波辅助加热法更为简便、快速。

Compared with hydrothermal method , the microwave-assisted method is more simple and rapid for the preparation of cellulose / CHA nanocomposites .