轴柱

方法用计算机图象分析系统得到阴道毛滴虫及核的长、宽、周长、长宽比、等效圆直径、圆度、面积、前鞭毛与后鞭毛、轴柱长度。

Methods The length , breadth , perimeter , aspect ratio , equivalent circle diameter , roundness and area of T. vaginalis trophozoites and their nuclei , and the lengths of axostyle , anterior and recurrent flagellum were measured by computer image analysis system .

CFRP加固混凝土轴压柱承载力的分析

Flexural capacity of the axial loading RC column strengthened with CFRP

通过对所收集的实验数据进行计算分析，在总结分析已有FRP约束混凝土本构关系模型基础上，根据能量守恒方程推导出FRP约束混凝土轴压柱极限强度公式。

It is derived formula for ultimate strength for FRP confined concrete columns under axial compression based on energy conservation equation .

目的研究FRP管高强混凝土轴压柱的受力性能，以利于实际工程的设计。

To investigate the mechanical behaviors of FRP tube filled with high-strength concrete subjected to axial loading is convenient for use .

一种基于Drucker-Prager准则的钢管混凝土轴压柱承载力计算方法

Method of Bearing Capacity for Axis Pressure Compression of Concrete Filled Steel Tube Based on Drucker-Prager Criteria

根据流体体积分数的定义，在直角系Youngs算法的基础上，通过引入修正系数，可以方便地实现Youngs算法在轴对称柱坐标系中的应用。

Based on its algorithm for Cartesian coordinate systems , definition of the function of volume of fluid and a revised coefficient are introduced , and Youngs ' method is developed for axisymmetric coordinate systems .

复合材料套箍混凝土轴压柱的试验研究

Experimental research on axial - compressed column constrained by composite

薄壁型钢混凝土梁柱节点抗火性能研究高强冷弯薄壁型钢轴压柱畸变屈曲研究

Fire Resistance Performance of Thin-Walled Steel - Concrete Beam-to-Column Joint

钻芯对混凝土轴压柱性能影响的试验研究

Experimental research on axial compressive RC columns with drilled core

轴压柱壳弹塑性稳定性分析的通用方程推导

Derivation of general equations for elastoplastic stability of cylindrical shell under axial compression

轴压柱壳在连续波激光辐照下的屈曲破坏

Buckling failure of the axially compressed cylindrical shell irradiated by CW co_2 laser beam

带约束拉杆方形钢管混凝土轴压柱局部屈曲性能

Local buckling of square concrete-filled steel tubular column with binding bars under axial loading

方中空夹层钢管混凝土轴压柱承载力有限元分析

Concrete-filled Double Skin Steel Tubes with Square Section Axially Compressive Behavior Nonlinear Finite Element analysis

含多个边裂纹的矩形截面阶梯形轴压柱的屈曲行为分析

Analysis for Buckling Behavior of Multi-step Rectangular Section Compressive Columns with Arbitrary Number of Side-cracks

钢管高强混凝土轴压柱耐火极限的试验研究

Experimental Study on the Fire Resistance of High Strength Concrete Filled Circular Steel Tubular Columns

高强冷弯薄壁型钢卷边槽形截面轴压柱畸变屈曲试验研究

Experimental study on distortional buckling of high strength cold-formed steel lipped channel columns under axial compression

矩形钢管混凝土轴压柱局部屈曲性能的解析分析

Theoretical analysis on local buckling behavior of concrete filled rectangular steel tube column subjected to axis force

钢筋混凝土十字形轴压柱耐火性能的数值模拟研究

Numerical study on the fire stability of the axial - compression cross - section column of reinforced concrete

基于变轴力柱恢复力模型的钢框筒地震反应分析

Earthquake response analysis of steel tube frames based on the hysteresis model of columns with axial loading change

直接强度法计算冷弯薄壁斜卷边槽钢轴压柱的承载力

Axially loaded carrying capacity calculation of thin-walled cold-formed channel columns with inclined simple edge stiffeners by direct strength method

分析结果表明：当横向干扰挠度大于一定程度时，裂纹才对轴压柱的临界荷载有影响；

The analytical results show that when an excessive lateral interfering deflection appears , the cracks will have effects on critical load ;

高强冷弯薄壁型钢轴压柱畸变屈曲研究焊接薄壁箱形截面轴心压杆的承载力计算

DISTORTIONAL BUCKLING BEHAVIOR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS SUBJECTED TO AXIAL COMPRESSION Capacity Calculation of Welded Axially Compressed Members with Thin-Walled Box Section

在此基础上，提出了用压溃理论计算方钢管混凝土偏压柱极限承载力的简化解析方法，并将其应用于工程轴压柱（因其存在初始缺陷，实际上为小偏心受压）的计算。

It is also used in the calculation of axially compressed columns in engineering as they are actually under small eccentric compression due to initial defects only .

但是该方法目前只能解决几类特定截面形式的构件计算，边界条件也有所限制，只针对两端简支轴压柱和两端简支纯弯梁的计算。

But this method can only solve the problems of some certain section shape members within the limited boundary conditions such as the pin-ended columns and simply supported beams .

常系数线性非齐次方程组特解的一个注记第三，总结了在直角坐标系和轴对称柱坐标系下，流体的连续性方程和动量方程的几种特殊形式。

The Explanation of the Specific Solution for the System of Linear nonhomogeneous Equation with Constant Coeficient As for nonhomogeneous equation , the method of integrating coupling pressure and momentum equation is adopted .

通过对比初始局部缺陷柱与理想柱的极限承载力，得到了升温过程中具有初始局部缺陷柱相对于理想轴压柱的极限承载力修正系数曲线。

By comparing the ultimate bearing capacities between initial local imperfection column and ideal column , the curve of modified coefficient , about ultimate bearing capacity of initial local imperfection column to ideal concentric compression short column could be obtained .

本文提出的新型预应力格梁结构是将常规结构中的梁柱节点改为骑轴型柱帽节点，使楼盖受力最大的梁柱节点区域得到加强。

This paper presents a new type of prestressed grid beam structure in the conventional structure of the beam-column joints instead " riding axis " type column caps node . The floor has been strengthened by the greatest force of the beam-column joints area .

圆CFRP钢复合管混凝土轴压短柱试验研究

Experimental study on concentrically-compressed circular concrete filled CFRP-steel composite tubular short columns

圆钢管RPC轴压长柱的受力性能试验研究

Research on Mechanical Behavior of Axially Loaded Circular Steel Tube Filled RPC Slender Column

带有三角变形椭圆截面的环状轴对称等离子体柱的MHD平衡与稳定性

MHD equilibrium and stability of axial symmetric toroidal plasma with an elliptic cross section of triangular deformation