表面处理

过共晶Al－Si合金共生区激光表面处理

Laser Surface Treatment of Hypereutectic Al-Si Alloy with Coupled Eutectic Growth

Al2O3微粉表面处理及其在耐磨涂料中的应用研究

Surface Treatment for Al_2O_3 Powder and Its Application in Wear Resistant Coatings for Military Equipment

玻纤表面处理对于玻纤增强PET复合材料断裂韧性的影响

Effect of surface-treating of glass fiber on the gf / pet composites fracture toughness

Li（1.05）Mn2O4的表面处理对其电化学循环性能的改进

Improve on Electrochemical Cycling Behavior of Li_ ( 1.05 ) Mn_2O_4 by Surface Treatment Method

肝素表面处理的PMMA人工晶体的临床分析

Clinical analysis of intraocular PMMA lenses modified with surface immobilized heparin

结果表明：经表面处理后的超细二氧化硅可以有效改善PVC的力学性能。

The results show that the surface treatment superthin-SiO2 can efficiently improve the mechanical properties of PVC .

用表面处理法降低TiO2粉末光活性问题的研究

A study on decreasing photoactivity of tio_2 powder by using surface modification

玻璃纤维的表面处理及含量对GF／PVC性能的影响

The effects of surface treatment and weight loading of glass fiber on the behavior of gf / pvc

TiAl基合金的表面处理方法

Surface Treatment methods of TiAl Based Alloys

纳米TiO2薄膜经过渡金属离子掺杂和常压低温等离子体表面处理后，其光催化活性都有不同程度的增强。

After transition metal ions dope and atmospheric RF plasma surface treat , their photocatalytic activity has varying degrees of increase .

用扫描电镜（SEM）微观分析技术分析研究了经过表面处理前后的非晶态合金带增强的复合材料的表面和界面。

Using SEM technique , we examine the interface of this kind composites and the surface of amorphous metal ribbon which is treated and untreated .

经过表面处理的载体制备的催化剂活性显著提高（COD去除率增加约10%）。

Activities of catalyst made by surface treated support were higher than not treated support ( COD removal increased about 10 % ) .

实验结果表明：激光表面处理可以显著提高Zr－4合金抗疖状腐蚀性能；

The results show that the nodular corrosion resistance of zircaloy-4 can be improved remarkably by laser surface treatment .

但是，磷化、Cr（VI）有致癌和对环境有持久危险性。随着社会的发展，不久的将来，铬化和磷化在表面处理中的应用将会被禁用。

However , chromizing and phosphating will be banned in the near future due to their uphold hazard to environment and carcinogenic to humans .

PBO纤维及其表面处理技术

PbO fibre and its surface treatment technology

本课题尝试采用粉末冶金方法制备非连续Cf/Cu复合材料，对碳纤维的表面处理、复合材料的制备工艺进行了重点研究，并对复合材料的组织及性能进行了较为系统的研究。

In the study , powder metallurgy was adopted to fabricate discontinuous Cf / Cu composite . The surface treatment of carbon fibers and fabricating technology of the composite were two keys of the study .

研究了不同表面处理剂改性木粉填充回收PP的力学性能、加工性能.采用扫描电镜观察了纳米碳酸钙包覆木粉的形态，并对其耐热性能进行了分析。

Mechanical and processing properties of wood flour filed recycled PP with different surface modification agent were studied and the coating wood flour with nano-CaCO_3 were observed through SEM .

界面反应有效控制途径方面研究了、基体合金化、SiC颗粒表面处理、工艺选择与工艺参数控制等。

In the aspect of efficient control approaches to interfacial reaction , matrix alloying , surface treatment to SiC particles , process selection and process parameters control have been studied .

在测量ITO接触角的基础上，应用调和平均法计算了不同表面处理ITO阳极的表面能和极性度。

Based on the measurement of the contact angle of differently treated ITO , the surface energy and polarity were calculated using the harmonic mean method .

采用金属有机化学汽相沉积生长法（MOCVD），在不同的衬底表面处理条件和生长温度下，在GaAs衬底上生长出了ZnO薄膜。

ZnO films were grown on GaAs ( 001 ) substrates at different surface treatment conditions and growth temperatures by metal organic chemical vapor deposition ( MOCVD ) .

用合成的大分子表面处理剂GMTS处理了煅烧纳米高岭土、纳米Si3N4、纳米SiC、纳米A1N四种粉体。

Nano-kaolin , nano-Si _3N_4 , nano-Si C , and nano-AlN were treated by macromolecular surface treatment agent ( BA-MMA-GMTS ) .

研究了用3种偶联剂在水溶液、乙醇溶液和醇水溶液中对TiO2进行湿法表面处理的配方与工艺。用动态毛细管法表征处理前后TiO2表面性能的变化。

Three coupling agents were investigated to treat the titanium dioxide surface in different solutions , and the dynamic capillary law was used to ascertain the transformation of its surface .

本文着重介绍了模具CAD／CAE／CAM的发展趋势、快速原型制造技术、高速切削、反向工程与材料及表面处理技术等进行了综述。

The paper emphasis on the trend of CAD / CAE / CAM of die & mold technology , rapid prototyping , high speed manufacture , reverse engineering , material and finished surface technology .

以聚乙烯（PE）为基础树脂，采用共混改性及偶联剂表面处理等技术，研究了不同阻燃剂对PE物理性质及燃烧性能的影响。

Use polyethylene ( PE ) as basic resin , the affection of different fire retardant to PE physical property and combustion property is studied with techniques of blending modification and coupling agent surface treatment , etc.

Vf、纤维取向、纤维表面处理以及载荷和速度对K3D/EP复合材料的摩擦磨损性能有很大影响。

Vf , fiber orientation , fiber surface treatment , load and velocity have an great effect on friction and wear properties of K3D / EP composites .

本文用低温等离子、液态氧化、电晕、紫外接枝聚合等方法对UHMWPE纤维进行了表面处理，并用扫描电镜和XPS对纤维的表面形貌和含氧量作了表征。

The surface of UHMWPE fiber was treated by plasma , liquid oxidization , crone and UV grafting . The morphology and oxygen content of the fiber surface were characterized by SEM and XPS .

从纳米SiO2三种不同的分散工艺（研磨法、偶联剂表面处理法和高速均质剪切法）着手，通过原位聚合法制得SiO2/氰酸酯（CE）纳米复合材料；

SiO_2 / cyanate ester ( CE ) nano-composites were prepared in situ polymerization , and three different methods of dispersing nano-SiO_2 ( attrition treatment , coupling agent surface treatment , high-speed homogeneous shearing ) were investigated .

分别对SiC颗粒进行高温氧化、酸洗和高温氧化后再酸洗等表面处理，采用粉末冶金工艺制备了SiC颗粒增强的6066Al基复合材料。

The surface treatment of oxidation , acid-washing and acid-washing after oxidation were carried out on SiC particles , then 6066 aluminum alloy reinforced by SiC particles was fabricated by powder metallurgy route .

采用表面处理的纳米TiO2微粒分级混合于聚酯环氧粉末涂料中，研究了纳米TiO2对涂膜耐冲击性、抗弯性能的影响，以及所产生的优秀抗菌性能。

The surface pretreated nano TiO 2 particle is mixed in the polyester / epoxy hybrid powder coatings system . The influence of nano TiO 2 on impact and flexibility of coatings film and its excellent antibacterial effect is investigated .

本文采用活性涂层、刚性涂层、柔性涂层分别对F－12纤维进行表面处理，并研究了不同涂层对F－12/AE4环氧NOL环复合材料剪切强度的影响。

F - 12 fiber surface is treated with active , rigid and soft sizing respectively , and the effect of different sizing on shear strengh of F - 12 / AE4 NOL composites is studied in this paper .