表面分析

  • 网络surface;Surface Analysis;BET;Lesa
表面分析表面分析
  1. 真空电弧沉积的TiN薄膜表面分析

    Surface analysis on vacuum arc deposited tin film

  2. 原子力显微镜与x射线光电子能谱对LiBq4/ITO和LiBq4/CuPc/ITO的表面分析

    Surface analysis of LiBq_4 / ITO and LiBq_4 / CuPc / ITO using atomic force microscopy and x-ray photoelectron spectroscopy

  3. He-Ne激光管反射镜膜层的表面分析

    Surface analysis of the films for He-Ne laser mirrors

  4. 用AES表面分析技术研究了热氮化二氧化硅膜的结构。

    The structure of the films was analyzed byz the surface analysis method of AES .

  5. 染料敏化TiO2薄膜表面分析

    Surface analysis of TiO_2 dye-sensitized film

  6. HL-1装置表面分析站的研制

    A surface analysis station for the HL-1 TOKAMAK

  7. 实验采用的是分子束技术,以及俄歇电子能谱(AES),四极柱质谱(QMS)和X射线光电子能谱(XPS)等表面分析技术。

    The experimental works were carried by using the molecular beam technique and the surface analysis technique ( AES , QMS , XPS ) .

  8. 三元IPNPU/EP/PBA弹性体的研究Ⅳ.IPN的表面分析

    Study on the elastomer of three component IPN pu / ep / pba ⅳ . surface analysis

  9. 用扫描电子显微镜(SEM)和俄歇电子能谱(AES)两种表面分析技术对Co离子注入修饰微电极的表面状况、表面元素组成及深度分布进行测定。

    The composition and depth distribution of elements on the surfaces of Co ion implantation modified carbon fiber microelectrode were determined by scanning electron microscope and Auger electron spectroscopy .

  10. 采用了二次离子质谱仪(SIMS)和俄歇电子谱仪(AES)进行表面分析。

    The experiments were performed by means of Secondary Ion Mass Spectroscopy ( SIMS ) and Auger Electron Spectroscopy ( AES ) .

  11. AEAPS用于电子(束)管闭管无损表面分析

    Application of AEAPS for on-line surface analysis of electron beam tubes

  12. 采用电化学测试和SEM、XRD、XPS等多种表面分析技术,对20钢在聚丙烯酰胺驱油溶液中的腐蚀进行了系统的研究。

    The corrosion of 20 ~ # steel in polyacrylamide flooding solution used in oil field was investigated by electrochemical methods combined with series of surface analytical technologies , such as SEM , XRD and XPS .

  13. 用XPS和AES电子能谱的方法对等离子体辅助分子束外延(MBE)生长的GaN薄膜进行了表面分析和深度剖析。

    The surface composition of GaN grown by plasma-assisted MBE was investigated using X-ray photoelectron spectroscopy and Auger election emission spectroscopy ( AES ), while the depth profile was analyzed by AES with Ar iron sputtering .

  14. XPS表面分析表明,涂层表面Zr-O结合态为Zr~(4+),而涂层内部存在少量的缺氧现象。

    XPS result indicated that the binding state of top surface Zr-O was Zr ~ ( 4 + ), and oxygen-absence was discovered in the internal coating .

  15. 在自行研制的负电子亲和势光电阴极性能评估实验系统上,首次利用动态光谱响应技术和变角X射线光电子能谱(XPS)表面分析技术研究了GaAs光电阴极的(Cs,O)激活工艺。

    On basis of self-developing experimental system for evaluating NEA photocathodes properties , on-line spectral response measurement technology and angular-dependent X-ray photoelectron spectroscopy ( XPS ) technology are firstly used to research the ( Cs , O ) activation technique of GaAs NEA photocathodes .

  16. 然后,通过SRV摩擦磨损试验和现代表面分析技术,探讨了离子液体作为润滑剂,对钢-钢和钢-铜摩擦副的摩擦学性能及摩擦作用机理;

    Then , tribological properties and theory of ionic liquid for steel-steel or steel-copper rubbing pairs are evaluated by SRV friction test machine and by advanced surface analyzing technology .

  17. 利用失重、腐蚀电化学方法和表面分析技术研究了碳钢在富含H2S的乙醇胺(MEA)溶液中的腐蚀行为,以及添加缓蚀剂后对其电化学行为的影响。

    The corrosion behavior and the effect of the corrosion inhibitor on those behavior of carbon steel in MEA solution abounded with H 2S was investigated by static weight loss test , electrochemical method and surface analytical techniques .

  18. XPS表面分析通过对Pb4f的终结合能(135.05-135.55eV)对比显示,APRs对铅的去除要比PRs的更有效。

    XPS surface analysis confirmed that the Pb removal was more efficient with APRs than PRs by comparing the end BE of Pb4f ( 135.05-135.55eV ) .

  19. 用微波炉产生的微波对氟树脂进行等离子体处理,用ESCA作了表面分析。

    Three fluororesins ( PDVF . PTFE and FEP ) were treated with the microwave plasmas which generaed by an electronic cooking range and the surfaces of treated resins were analyzed with ESCA .

  20. 应用LAS-2000二次离子质谱表面分析系统作了如下测量:(1)测出HL-1装置的总出气量以及其主要出气组分的出气量百分比和出气峰值温度等参数;

    The main experimental fruits obtained with a LAS-2000 SIMS system are the following : ( 1 ) As the first wall sample being heated , the total outgassing amount , the component percentage and the temperature refer to the outgassing peak were measured .

  21. 用于固体样品表面分析的新技术&共振激光消融

    Resonant laser Ablation-A novel technique for surface analysis of solid samples

  22. 高温光电倍增管铜铍合金电极的表面分析

    Surface Analysis of CuBe Alloy Electrode of Photomultipliers Operating at High Temperature

  23. 分形理论在材料磨损表面分析中的应用

    The Application of Fractal Theory in the Surface Analyzing of Worn Materials

  24. 表面分析手段对阴极研究是必不可少的。

    Therefore , surface analysis is necessary for cathode researches .

  25. 不同温度热氧化处理钛种植体表面分析

    Surface Analysis on Different Temperature Thermal Oxidation Titanium Implant Surfaces

  26. 电子束表面分析的一点注记

    A note about the surface analysis by using electron beam

  27. 应用于工业催化剂表征中的几种表面分析技术

    The Application of Surface Analysis Techniques on Catalyst Char

  28. 它同时也是一种表面分析的工具。

    It also provides a tool for surface analysis .

  29. 抗凝血生物材料研究中的表面分析方法

    Application of Surface Analysis Methods in Researching Anticoagulant Biomaterials

  30. 活化粉煤灰填充橡胶的表面分析

    Surface Analysis on Rub Packed with Activated Flyash