粉末化

扫描电镜（SEM）分析表明，炭黑在P（CR/SRF）中的分散程度优于CR/SRF，采用粉末化技术有利于提高填料在橡胶基体中的分散效果。

SEM analysis showed that the dispersion of carbon black in P ( CR / SRF ) are better than that of CR / SRF , which gives carbon black filled powdered polychloroprene rubber a good respect in improving the dispersion of filler in the rubber matrix .

粉末化猪油工艺的研究小麦熟相问题

Microencapsulation of lard STUDY ON CHARACTERS OF MATURE PERIOD OF WHEAT

改性平面流铸粉末化过程的数值模拟

Numerical simulation of a new powder process named modified planar flow casting atomization

液体油脂粉末化中新型壁材的应用研究

Study on the Application of New Wall Material in Powdery Liquid Oil Industry

壳聚糖微细粉末化研究

Research on Microcrystalline Chitosan Powder

粉末化猪油工艺的研究

Powder Coating Microencapsulation of lard

猪油资源的深加工粉末化猪油工艺的研究

Deep-processing Technique of Lard

建立氯丁胶乳的逆凝聚粉末化模型并采用均匀试验设计的方法对该模型进行了验证。

A reverse-coagulation powder model of CR latex was established . The model was verified by uniform experimental design method .

猪油与油溶性乳化剂、水溶性乳化剂及壁材等在一定条件下混合均匀、乳化、均质，经喷雾干燥得粉末化猪油。

In a certain conditions , lard , wall material and emulsifying agent was mixed , emulsified , homogenized , and then dried with spray drier to obtain powdered lard .

结果表明：在大多数磨削条件下，nWC/12Co磨削的材料去除机理主要是非弹性变形方式，即以塑性变形为主，伴随一定的材料粉末化，材料较少以脆性碎裂去除。

It is found that the dominant mechanism of material removal of precision grinding for nWC / 12Co coatings is mainly the inelastic deformation including plastic deformation with a certain amount of pulverization , and less removal from material brittle fracture .

TiC粉末微晶化的正电子湮设研究

Positron annihilation study on microcrystallization in tic powder

采用粉末致密化发泡（PCF）工艺制备了泡沫纯铝，对制备过程及影响孔结构的因素进行了分析。

Aluminum foams were fabricated by Powder Compact Foaming ( PCF ) process .

深入研究了ATO粉末纳米化并优化了工艺参数。

The preparing of ATO nano-sized powder was investigated and technology parameters were optimized .

高能球磨时间对Fe-Al粉末合金化组织转变的影响

Influence of high power ball milling time on structural change of Fe-Al powder alloying

采用冷压-烧结-复压-复烧工艺对Cu-Cr合金粉末致密化过程进行研究。

Densification Process of Cu-Cr alloy powders was studies by means of cold pressing-sintering - repressing-resintering method .

电子线路板树脂粉末资源化技术分析

Analysis on the Reuse Technology of Resin Powder from Electronic Circuit Board

碎成粉末，化为尘土粉末冶金弥散强化合金

Crumble to [ into ] dust dispersion strengthened alloys made by powder metallurgy

鉴于兆频带近场电磁干扰抑制材料需求的增加，采用气雾化制粉、粉末扁平化、绝缘压结、真空退火工艺制备出具有高频宽带分布磁导率特性的新型软磁合金复合材料。

A new soft magnetic alloy with high frequency was prepared by atomized powder , molding and vacuum annealing technology .

利用一个简单的模型来对Fe75Si25混合粉末合金化过程进行了描述。

A simple model was used to describe the mechanical alloying process of Fe_ ( 75 ) Si_ ( 25 ) mixture .

粉煤灰对土的塑液限的影响试验研究碎成粉末，化为尘土

The Influence of the Soil s Plastic Limit and Liquid Limit with Powdered Fly Ash ; crumble to [ into ] dust

本文提出的金属粉末致密化工艺与传统的压实烧结致密；冷热等静压致密：粉末模锻的致密化工艺不同。

The densification process of metal powder presented here is different from those of powder forging , cold or hot isostatic pressing , and traditional compacting sintering .

进一步采用添加贮（释）氢稀土氢化物粉末作活化剂的方法，研究了释氢化合物的助活化液相烧结的作用及机理。

Further , by adding hydrogenated rare-earth compound to heavy alloy powder as activator , the behavior and mechanism of hydrogen-releasing compound to help activated liquid-phase sintering were studied .

本文分析了316不锈钢粉末球化效应产生的原因，讨论了工艺参数（激光功率、扫描速度、粉层厚度）对316不锈钢金属粉末烧结成形的影响。

The balling effect of 316 stainless steel powder was studied , and the effects of process parameters , such as laser power , scan rate , and layer thickness , on , the success of laser sintering were discussed .

Ti（C，N）粉末的微晶化

Micritization of Ti ( C , N ) Powder

球磨工艺参数对Y2O3和Al2O3混合粉末机械合金化的影响

Ball milling technique influence on mechanical alloy of Y_2O_3 and Al_2O_3 mixed powders

纳米Ni-Al2O3金属陶瓷粉末热压致密化过程

Hot pressing densification process for nano Ni-Al_2O_3 powders

结果表明：对于Fe75Si25粉末，合金化得到的是bcc晶体结构的-αFe（Si）固溶体。

The result shows that the microstructure of the obtained Fe-Si alloys is the α - Fe ( Si ) with bcc crystalline structure .

Ti-Al二元粉末机械合金化过程中组织结构的变化

Evolution of Microstructures of Ti / Al Binary Powders During Mechanical Alloying Process

Ti-Al系粉末机械合金化的热力学分析

Thermodynamical Analysis of Mechanical Alloyed Ti-Al

通过X射线衍射、SEM分析及显微硬度测试等手段，研究了Cr80Al20混合粉末机械合金化过程中的组织、相结构及硬度等的变化。

The changes of microstructure , phase constituent and microhardness of the Cr Al mixed powders during mechanical alloying treatment have been investigated using X ray diffraction analysis , SEM examination and microhardness testing .