简化模型

  • 网络simplified model;reduced model;reduced form models;reduced-form model;defeature
简化模型简化模型
  1. 基于简化模型的MR阻尼器动力特性

    Dynamic Characteristic of MR Damper Based on Simplified Model

  2. 通过MATLAB仿真验证了简化模型和所推导结论的正确性,并表明该限流器设计合理,限流效果明显。

    The simplified model and conclusion taken are proved by MATLAB simulation .

  3. F2/H2链反应脉冲化学激光器简化模型计算

    Numerical modeling of pulsed F_2 / H_2 chain reaction lasers

  4. 包含CO2因子的冬小麦叶片光合作用农业气象简化模型研究

    Studies on Simplified Agro-meteorological Models on Leaf Photosynthesis of Winter Wheat Including CO_2 Impacts

  5. 研究的主要结论和成果有:1.建立了RC简化模型并编写了MATLAB可视化计算程序。

    Firstly , RC simplified model and MATLAB computer program are established and written .

  6. 35μm激光&铝靶x射线转换效率测量和简化模型

    Experimental measurement and a simple model for soft X ray conversion efficiency from 0 . 3 μ m laser-irradiated al planar target

  7. 本文在血流Doppler接收信号一般表达式的基础上,提出了一个易于模拟的简化模型。

    From the general expression for the received Doppler blood flow signals , a simplified model easy to simulate is given .

  8. 流水作业是许多实际生产调度问题的简化模型,也是一类典型的NP完全问题。

    Flow shop is the simplified model of many actual production scheduling problems , and it is also a typical NP-complete problem .

  9. 而且,还采用ANSYS有限元方法对单层钢框架结构及半柱模型进行非线性静力分析,验证了提出的简化模型的正确性。

    Nonlinear static analysis to single-story steel frame structure and semi-column model is analyzed by ANSYS program . Consequently , it is proved that simplified method is correct .

  10. 利用ADAMS软件建立了考虑绳索和柔性梁的自动化立体仓库巷道式堆垛机的简化模型。

    A simple modeling method of a laneway stacker crane in automatic stereoscopic warehouse is introduced using ADAMS with ropes and flexible beams considered .

  11. LB膜是细胞膜的简化模型。

    Langmuir-Blodgett ( LB ) films are useful as a simplified model system of a biological membrane .

  12. 针对焦炉生产过程的简化模型,在Matlab中对这种控制方法进行了仿真.仿真研究表明该方法应用于焦炉控制是可行的。

    For the simplified coke oven model , we simulate the neural adaptive control method in Matlab , and the simulation results show that it is feasible to apply this method to coke oven control .

  13. 在简化模型的基础上,用有限元软件ANSYS对该过程进行了瞬态分析,并得出了板辊弯后的残余应力分布。

    Based on simplified model and boundary conditions , a transient analysis is developed with a general finite element program ANSYS and the residual stress after the whole rolling process is also obtained .

  14. 算例结果表明,MDO简化模型可有效解决卫星概念设计阶段中的多学科耦合。

    The computation results showed that the simplified MDO could implement the multidisciplinary decoupling in the conceptual design for satellite .

  15. K值是人口增长的容量极限值,分析影响K值的各种因素之间的相关关系,树立从而建立K值简化模型、正确的人口观和发展观。

    ″ K value ″ is the limit of of population growth capacity . By analyzing the interrelationship among various kinds of factors of ″ K value ″, it is to trying to set up correct population views and development view .

  16. 分析了几种典型的稀疏孔径结构及其MTF的分布特点。研究了利用光学稀疏孔径系统简化模型进行模拟成像以及图像复原问题。

    The MTFs of some typical aperture configurations are analyzed , and the process of imaging simulation based on the simplified model is discussed as well as image recovering for sparse-aperture systems . 2 .

  17. 论述了检测仪的系统设计和简化模型的MCNP仿真,给出了检测仪的一些实验结果。

    The prototype design of the detector is described , MCNP simulation and physics analysis based on a simplified model is done , and some experiment results are also given .

  18. 本文以支承HDD主轴的自密封滑动轴承为对象,通过一个简化模型研究了因热膨胀导致的润滑液泄漏问题。

    This paper , based on a simplified model , researched the problem of liquid lubricant leakage caused by thermal expansion effects in self - sealed journal bearings used in HDD spindles .

  19. 以Jeffcott转子为动静碰摩的简化模型,建立了系统的微分方程,由仿真计算分析出阻尼、刚度等参数变化对碰摩振动的影响。

    The differential equations are founded on Jeffcott rotor which is the predigested model of the rotor rub-impact . By emulate calculation some parameters changes influence the rub-impact vibration .

  20. 测量了玻璃中Er~(3+)的1.5μm近红外发射的变温光谱,利用简化模型得到了Er~(3+)的~4I(13/2)能级高能Stark劈裂态的光谱。

    1.5 μ rn emission spectra of the Er3 + - doped glasses at different temperatures were measured , and the spectra of high-level Stark sublevel of 4I_ ( 13 / 2 ) level were obtained using a simplified model .

  21. 基于在液态金属实验回路上的实验,对非均匀磁场中液态金属射流的MHD稳定性进行了研究,建立了一个描述射流性能的简化模型。

    Based on the experiments at the Liquid Metal Experimental Loop , the MHD stability of liquid metal jet flow in non-uniform magnetic field has been studied , and a simplified model is developed to describe the behaviour of jet flow .

  22. 应用双开口变量(整体空分系数(Xas)和氮气回注系数(Xgn))和折合系统效率的概念,建立了IGCC中燃气轮机全工况特性简化模型;

    The off-design characteristic model of GT with two opening variables - ASU-integrated coefficient ( Xas ) and Nitrogen-reinjected coefficient ( Xgn ) - and IGCC overall efficiency , is investigated ;

  23. 主要工作如下:1.引入基于掺铒光纤(EDF)Giles模型的多种简化模型,在不同近似水平下对掺铒光纤特性及掺铒光纤激光器(EDFL)进行了解析研究。

    The main work and results are as follows : 1 . The analytic researches on characteristics of Erbium-doped fiber ( EDF ) and Erbium-doped fiber laser ( EDFL ) were carried out based on Giles model in different approximate level .

  24. 分析了宽带阵列信号模型,并结合具体的非平稳雷达信号,推导了宽带线性调频信号的简化模型、完整模型以及宽带对称三角线性调频(STLFM)信号的阵列输出模型。

    The wideband models of the array output were discussed , according to the alternative nonstationary radar signals , the simplified model and complete model of the wideband LFM signals are derived respectively , as well as wideband symmetric triangle LFM ( STLFM ) signals .

  25. 基于简化模型预测控制的鲁棒性分析

    Robust Analysis of Predictive Controller Based on Simplified Impulse Response Model

  26. 多项式输入无稳态输出误差时的最优简化模型

    Optimal reduced model without steady-state output error subject to polynomial inputs

  27. 本文对绝热式合成氨反应器,提出一种双线性简化模型。

    A bilinear model of adiabatic ammonia reactor has been developed .

  28. 讨论了盲信号分离的一般模型到简化模型的推导。

    A simplified BSS model is deduced from the general model .

  29. 体内微型诊疗装置磁定位简化模型的实验研究

    Study of Simplified Magnetic-location Model for Micro Medical Device inside Human Body

  30. 基于简化模型的卷积混叠盲分离并行算法

    Blind deconvolution parallel algorithm based on a simplified mixing model