等静压

  • 网络HIP;cip;isostatic pressing;PM-HIP;Hot Isostatic Pressing
等静压等静压
  1. 热等静压制备Ti(C,N)基金属陶瓷功能梯度材料

    Preparation of Functionally Graded Ti ( C , N ) - based Cermets with HIP Technology

  2. 实验室型热等静压设备是开展HIP技术研究的基本手段。

    Laboratory-scale HIP equipment is an essential means for studying HIP technology .

  3. Ti(C,N)基金属陶瓷在烧结-热等静压条件下的组织、性能研究

    Study of ti ( c , n ) - based cermets manufactured by sinter-HIP

  4. 利用等静压技术制备牙科Al2O3/ZrO2陶瓷材料

    Preparing of Al_2O3_ / ZrO_2 Composite Dental Ceramics through Isostatic Pressing Technology

  5. 热等静压(HIP)技术在硬质合金及陶瓷材料中的应用

    Applications of hip technology in cemented carbides and ceramics materials

  6. 热等静压(HIP)技术在金属材料方面的应用

    Applications and development of hip technology in the field of metallic materials

  7. 热等静压(HIP)&消除铸件缺陷的有效方法

    Hot isostatic pressing ( hip ) & an effective method eliminating casting defects

  8. 高温等静压后处理液相烧结SiC陶瓷的结构与性能表征

    Characterization of Microstructure and Properties of Post-hot Isostatic Pressing of Liquid Phase Sintered SiC

  9. 方法:经等静压成型,1400℃烧结,制作了可供牙科CAD/CAM加工的部分烧结氧化铝。

    Methods : Alumina compacts were prepared with isostatic press method and sintered at 1400 ℃ for 2h .

  10. 对CO2与PS在高压设备中进行等静压处理的微孔发泡进行了研究。

    The research of microcellular foaming in CO2 / PS system is presented in this paper .

  11. ITO靶材热等静压致密化工艺研究铟锡氧化物陶瓷靶材热等静压致密化研究

    Investigation on hip technique for densification of indium tin oxide ceramic target

  12. 本文还研究了Si的添加和热等静压(HIP)工艺对烧结体性能影响。

    We also study the effect of addition of Si and the HIP process on properties of sintered bodies .

  13. 冷等静压-烧结法制备ITO磁控溅射靶材的工艺研究

    Study on Technology for Preparation of ITO Target by CIP and Sintering Process

  14. 对热等静压方法制备的(Nb,Ti)C-35Ni金属陶瓷的高温抗弯强度进行了研究。

    The flexural strength of ( Nb , Ti ) C-35 Ni cermet at high temperature produced by hot-isostatic-pressing was measured .

  15. TiO2压敏电阻陶瓷元件等静压成型试验研究

    The Effect of Isostatic-pressing Method on TiO_2 Varistor Ceramics

  16. 热等静压方法制备蓝青铜K(0.3)MoO3多晶材料

    Preparation of the Blue bronze polycrystalline material K_ ( 0.3 ) MoO_3 by HIP method

  17. 冷等静压成型得到的YAG烧结体致密度大于于压成型。

    Also the density of YAG ceramic obtained at the cold isostatic pressing is higher than that using dry pressing .

  18. 对化学气相沉积(CVD)ZnS经热等静压(HIP)处理前后在光学透过率等方面的改变进行了比较分析。

    Transmittance of CVD ZnS before and after heat isostatic processing ( HIP ) was measured and compared .

  19. 评述了镍基铸造高温合金的热等静压(HIP)处理对组织和力学性能的影响。

    The effect of hot isostatic pressing ( HIP ) treatment on microstructure and mechanical properties of cast Ni-base superalloy as reviewed .

  20. 热等静压处理对定向凝固NiAl/Cr(Mo,Hf)合金沉淀相和高温拉伸性能的影响

    Effect of hip on precipitations and tensile properties of directionally solidified nial / cr ( mo , hf ) alloy

  21. 热等静压烧结Nd-Fe-B永磁体

    Microstructural study on Nd-Fe-B permanent magnets prepared by hot isostatic pressing sintering

  22. 同时阐明,实验室型热等静压设备还可承担适当尺寸的多(?)类型材料HIP零件的生产。

    The paper further explains that some parts in certain size and many kinds of materials can be produced by laboratory-scale HIP equipment .

  23. 实验研究了热等静压工艺参数&保温温度、保压压力和保温时间对ITO陶瓷靶材致密化的影响。

    The effect of main parameters of HIP technique on the densification of ITO ceramic target was investigated .

  24. 热等静压ZrO2-Y2O3陶瓷的组织结构与性能

    Microstructure and mechanical properties of hip and aged zro_2-y_2o_3 ceramics

  25. Nd-Fe-B磁体热等静压烧结的实验研究

    Heat Isostatic Pressing Sintering of Nd-Fe-B Permanent Magnets

  26. 用真空烧结、后续热等静压(HIP)和烧结-热等静压方法制取WC-Co系列硬质合金。

    A series of WC Co carbide alloys were produced by VS , VS HIP , sinter HIP technologies .

  27. 本研究采用近净尺寸冷等静压成型、无压烧结Si3N4工艺成功地制备出了6105柴油机田Si3N4陶瓷气门,对陶瓷气门材料及制备工艺进行了详细讨论。

    The silicon nitride ceramic valves for 6105 diesel engine were fabricated by near net size-cold isostatic pressing and pressureless sintering .

  28. 等静压诱导的PbLa(Zr,Sn,Ti)O3陶瓷铁电反铁电相变性能研究

    Hydrostatic pressure-induced ferroelectric-antiferroelectric phase transition in pbla ( zr , sn , ti ) o_3 ceramics

  29. 通过光学显微术、SEM、EDAX、XRD技术分析了热等静压对材料的显微组织和相成分的影响。

    The microstructure and the phase composition of the alloy were analyzed through optical microscopy , SEM , EDAX and XRD techniques .

  30. 大尺寸TiB2-Cu-Ni金属陶瓷块体的燃烧合成及准热等静压致密化

    Preparation of large-scale TiB_2-Cu-Ni cermet by combustion synthesis + pseudo hot isostatic pressing