程控交换系统

程控交换系统程控交换系统
  1. 介绍了NEAX6_1E程控交换系统中原票和局数据的基本概念及其相互间的关系。

    The basic concept and relationship of the original sheet and office data are introduced in the paper .

  2. 本文首先介绍了华为公司的CC08数字程控交换系统的结构和多级模块组网方式,接着提出了CC08的智能业务业务解决方案和Internet接入解决方案,最后对其网管系统进行了简单陈述。

    In this paper , the configuration and hierarchical modular networking are introduced , and the intelligent sen-ices solution and Internet access solution are put forward , and finally the network management system is briefly stated .

  3. SDS-1型教学用程控交换系统的开发与研制

    Developing a SDS 1 SPC Switching System for Teaching

  4. 基于MSL-1程控交换系统的综合性实验设计

    Design of Integrated Experiments Based on MSL - 1 Program - Controlled Exchange System

  5. 该文介绍基于MSL-1程控交换系统的综合性实验方案的设计。

    This paper introduced the designing way of integrated experiments based on MSL-1 program-controlled exchange system .

  6. 局用程控交换系统开发应用状况及发展趋势

    Status and Trends of local SPC Switching System Development and Applications

  7. 面向未来通信的C&C08数字程控交换系统

    C & C08 Digital SPC Exchange Facing to the Future

  8. 分布式程控交换系统中人机通信的性能测量分析

    Analysis of the MMC Performance Measurement for the Distributed SPC Switching Systems

  9. 中容量用户电报/低速数据程控交换系统研制成功

    Medium-Range Telex / Low Speed Data SPC Switching System

  10. 分布式数字程控交换系统的实现技术

    Implementation Techniques for Distributed Digital SPC Switching System

  11. 模拟用户线接口电路是数字程控交换系统的重要组成部分。

    Subscriber line interface circuit is an important part of digital program-controlled switching system .

  12. 一种用于野战通信的多功能程控交换系统

    A Multi-feature Switching System Used in Military Communication

  13. 小型程控交换系统的可靠性设计

    Reliability Design of Small Microprocessor-Controlled Switch System

  14. 本文研究的即为适用于电力部门的小型数字程控交换系统。

    The small digital programmable exchange system studied in this paper is suitable for electric department .

  15. 本文主要完成了数字程控交换系统整体硬件设计和时钟级程序的设计。

    The goal of this paper is to complete the design of the whole hardware system and clock class program .

  16. 增强了程控交换系统与其他类型通信网(如传真网、分组交换或公用数据网、计算机局域网等)的接口,联接与组网能力。

    Enhanced programmed exchange system with other types of communications networks ( such as fax networks , packet switching or public data networks , computer LAN ) interfaces , connectivity and network capacity .

  17. 全分散控制数字程控交换系统广泛采用分布式数字交换网络,其阻塞概率和设备配置是设计中必须考虑的重要问题。

    The distributed digital switching network is widely used in full decentralized digital SPC switching systems . Its blocking probability and dimensioning is an important issue which must be taken into account for design .

  18. 作者在文中介绍重庆邮电学院开发研制的SDS-1型教学用程控交换系统,阐述了该系统的组成结构、各个功能的实现方法、灵活的体系结构及其突出的新特点。

    This paper introduces a new SDS 1 SPC ( Stored Programme Control ) switching system for teaching , and explains its construction , ways of realizing each of its functions , its flexible system architecture and its outstanding new features .

  19. 程控交换实验系统USB接口设计

    The Design of USB Interface in Stored Program Control Switching System for Teaching

  20. 本文以程控交换实验系统的USB接口设计为背景,给出了基于EZ-USB控制器的解决方案,重点论述了设备端和主机端软、硬件的设计与实现方法。

    With the background of the USB interface design in stored program control switching system for teaching , the paper presents a solution based on EZ-USB , in which the design and implementation of the hardware and software on both host and device sides are demonstrated in details .

  21. 程控电话交换系统中的容错计算机实例分析

    Case Studies of Fault-Tolerant Computers in Electronic Switching Systems

  22. 多终端程控交换实验系统的开发研究

    The Development of A Multi-terminal Program Control Exchange

  23. 程控数字交换系统的发展趋向

    Development Trends of Digital SPC Switching Systems

  24. 介绍一种数字程控交换实验系统的组成和原理,以及系统硬件和软件的实现。

    This paper introduces the component and principle of Digital Program Control Exchange Experimental System , as well as the realization of the hardware and software .

  25. 本文从PS-NA程控交换机交换网络系统测试台的工程实际出发,提出了一套JD-1024程控交换机交换网络的系统测试方法,采用模拟交换网络功能进行系统的环路测试。

    From engineering practice of ps-NA testing equipment of Swit-ching Network , a System testing method for JD-1024 Switching Network is presented in this paper . The Loopback tests are performed by simulating function of switching Network .

  26. 程控数字交换模拟系统设计

    The Design of a Simulated System of Stored Program Control Switch

  27. 基于计算机网络的程控交换教学实验系统

    The Experiment Facility of Digital Switching Based on Computer Networks

  28. 程控交换机交换网络系统的测试与故障诊断

    Test and Fault Diagnosis for Swit-ching Network System

  29. 该文分析和比较了传统的结构化方法和面向对象方法的优缺点,并以一个实例说明了该技术在程控交换仿真训练系统中的应用。

    This paper analyses and compares the difference between the traditional structure method and the object oriented method , it also examples the application of this technology in the simulation training system of stored-program controlled telephone switch by an instance .