甲烷氯化物
- 网络Methane chloride;cms;chloromethanes
-
综述了国内外甲烷氯化物(CMS)的生产和市场情况,并对未来的发展作了预测。
Status of CMS production and market at home and abroad are summarized , and the future development is also forecasted .
-
提出促进甲烷氯化物行业健康有序发展的建议。
The suggestions about improving health and ordered development of CMS were put forward .
-
甲烷氯化物装置的DCS应用
The Application of DCS in Device of Chloromethanes
-
对CMS(甲烷氯化物)生产工序中20钢的现场腐蚀情况进行了统计,探讨了HCl-H2O-CMS体系对20钢的腐蚀规律及其机理。
Effects of HCl-H2O-CMS system on corrosion of 20 # steel was studied by using corrosion field data in the process of methane chlorination production .
-
国内外甲烷氯化物工业状况及其差距
The Status and Gap of Chloromethanes Industry at Home and Abroad
-
石墨换热器在甲烷氯化物生产中的应用及发展前景
Application and prospects of graphite heat exchangers in production of chloromethane
-
浅谈甲烷氯化物生产过程水分控制
Discussion on the moisture control in the production of methane chloride
-
中国甲烷氯化物行业发展的探讨
Discussion on development of chlorinated methane product industry in domestic
-
结果证明鸿化甲烷氯化物装置选用的反应器是合适的。
The result for the reactor calculation is proved right .
-
甲烷氯化物的国内外市场与工艺发展趋势
The Present Situation and Developing Trend of the chlorinated Methanes
-
卡尔费休库仑滴定法测定甲烷氯化物中微量水分
Determination of Trace Water in Methane Chloride with KF Coulometric Titration Method
-
非水电位滴定法测定甲烷氯化物微量酸度
Determination of micro acidity of methane chloride by non-aqueous potentiometric titration method
-
谈生态环境治理的对策甲烷氯化物反应器的腐蚀及防护
Corrosion of methane chlorides reactors and their protection countermeasures
-
防电网波动技术在甲烷氯化物装置中的应用
Application of Anti Power Network Technology in CM Equipment
-
我国甲烷氯化物产品成本核算规程的探讨
Discussion on business accounting regulations of methane chloride products
-
加强协调促进甲烷氯化物企业健康有序发展
Improve coordination for health and ordered development of CMS
-
我国甲烷氯化物的生产与技术进展
Production and technique progress of chlorinated methanes in China
-
中国甲烷氯化物发展现状及趋势分析
Analysis on present situation and trend of the development of chlorinated methanes in China
-
生产甲烷氯化物的氯化反应器设计研究
The Reactor Design and Study for Production Chloromethanes
-
甲烷氯化物生产和市场分析
The production and market analyses of chlorinated
-
甲烷氯化物低沸塔底料泵机械密封的改造
Innovation on Mechanical Seal of Low Boiling Column Bottoms in the Production of Methane Chloride
-
甲醇法甲烷氯化物装置副产稀硫酸生产饲料级磷酸氢钙装置设计
The Design of 10kt / a DCP from Dilute Sulfuric Acid Produced by the Carbinol Methane-chlorides Project
-
介绍了甲烷氯化物的生产状况,并分析了市场的发展与变化。
The production status of chlorinated methane are introduced , the development and movement of its market are analyzed .
-
甲烷氯化物是化工行业的重要原料,用天然气热氯化法生产甲烷氯化物系列产品的反应器处于含氯和氯化物的氛围中,腐蚀现象严重,造成了经济损失。
Methane chloride which are important material in chemical industry are produced by natural gas with method of thermal chlorination .
-
采用甲烷氯化物副产盐酸制备了乙烯利,讨论了反应温度、时间以及副产盐酸杂质含量对乙烯利收率的影响。
This study involves in the method of determination of fluorine content in by-product hydrochloric acid of compound manure with ion elective electrode .
-
对我国甲烷氯化物行业现状和优势、劣势进行了分析,并提出发展建议。
This article analyze the status , superiority and inferior position of chlorinated methane product industry in domestic , and put forward the development proposal .
-
本文在分析的基础上,确定了采用对粗氯化液进行共沸蒸馏以进一步降低甲烷氯化物中水份的设计方案。
In this thesis , the author has determined the design plan of applying azeotropic distillation to semifinished chlorinated solution in order to further reduce the moisture content of chlorinated methane .
-
对甲烷氯化物低沸塔底料泵机械密封频繁失效进行了分析,主要原因是物料中杂质进入和密封结构、材料不合理等。
Main reason for frequent failure on mechanical seal of low boiling column bottoms in the production of methane chloride is due to impurity entry and airproof structure , unreasonable material .
-
实验结果表明,铁催化还原法可以有效的去除甲烷氯化物生产废水中的氯仿、四氯化碳;
From these experiments , it was confirmed that catalytic reductive dechlorination by zero-valent iron was a valid method to reduce the chloroform and tetrachloromethane in the wastewater from the chlorinated compound industry .
-
甲烷氯化物产品水份超标将导致产品易水解、偏酸、产生氯化氢,从而加剧用户和自身生产过程设备的腐蚀。
The excessive moisture content in chloride methanes ( CMS ) will cause hydrolyzation , over acidification and generation of HC1 in CMS products , as a result to increase the corrosion of equipment in manufacturing and consuming process .