热轧钢

rè zhá ɡānɡ
  • hot-rolled steel
热轧钢热轧钢
  1. 咨询公司steelbusinessbriefing表示,9家最大企业已经减产,而另一家咨询公司“我的钢铁”(mysteel)表示,当前危机可能导致中国损失50万吨的热轧钢产出。

    Steel business briefing , a consultancy , said that nine of the largest companies had cut back , while another consultancy , Mysteel , said China could lose 5 00000 tonnes of production of hot-rolled steel as a result of the crisis .

  2. 水平偏振横波在热轧钢棒表面探伤中应用的研究

    Research of applying horizontal polarization transverse wave for surface testing of hot-rolled steel bar

  3. 热轧钢U形件弯曲回弹影响因素的分析

    Analysis of springback factors for U-bending hot - rolled metal sheet parts

  4. 用多功能SRV试验机评价了热轧钢/热轧钢摩擦副在干摩擦条件下的高温减摩抗磨性能,并对高温磨损表面进行了分析。

    The wear resistance and friction-reducing properties of hot rolling steel / steel pairs under dry friction and high temperature were analyzed by the SRV multifunctional test equipment .

  5. 咨询公司CRU表示,受上述因素推动,基准的美国热轧钢卷价格自去年11月初以来上涨了37%,达到每吨783美元,为2年来最高水平。

    That has pushed the price of benchmark US hot-rolled coil steel 37 per cent higher since early November to a two-year high of $ 783 a tonne , said CRU , a consultancy .

  6. 热轧钢卷强制冷却中的应力腐蚀分析

    Analysis of stress corrosion during forced cooling of hot rolled coil

  7. 热轧钢延性损伤断裂过程各向异性的细观力学分析

    Meso-mechanical analysis of fracture process of anisotropic ductile damage in hot-rolled steel

  8. 热轧钢卷卷取后强制冷却工艺的研究

    Research of Constraint Cooling Technology of Hot Rolling Coil

  9. 热轧钢卷冷却过程温度演变的模拟和分析

    Temperature Analysis of Hot Rolled Coil During Cooling

  10. 热轧钢件几何尺寸在线测量系统

    On line measuring system for hot rolled steel

  11. 取向硅钢热轧钢卷板型凸度的控制

    Control on crown of hot rolled coil ( strip ) for oriented silicon sheet

  12. 冷轧或热轧钢片阔度公差

    Width Tolerance of Cold or Hot-rolled sheet

  13. 热轧钢棒涡流探伤中抖动噪声的基理分析及抑制方法

    Analysis and inhibition of mechanical vibration noise in eddy current detection of hot-rolled steel bar

  14. 每年生产的热轧钢总量将达三百万吨。

    A total of three million metric tons of hot strip will be produced per year .

  15. 连铸板坯侧凹浇铸减少热轧钢卷侧翻宽度的工艺实践

    Process Practice for Reducing Width of Side Reversal of Hot Rolled Coil by Reentrant Casting of Slab

  16. 分析了热轧钢卷冷却的传热过程,建立了钢卷冷却过程的传热模型。

    The heat transfer model was developed and the heat transfer of the coil during cooling was analyzed .

  17. 热轧钢结构翼板钢轧制过程有限元仿真及其柔性化研究

    The Fem Simulation for the Hot-Rolling of the Steel Structure Wing Plate Steel and the Research of Flexible Rolling

  18. 薄板坯连铸连轧热轧钢卷作为冷轧原料若干问题的探讨

    Discussion of Several Problems on Hot Rolling Strip of Thin Slab Continuous Casting and Rolling as Raw Material for Cold Rolling

  19. 生产控制计算机在热轧钢卷管理中的应用冷轧钢卷退火过程粘结原因分析及预防

    Application of Production Control Computer in the Management of Hot Rolled Steel Coils Analysis and Prevention of the Reasons of Cold-rolled Strip Sticking During Annealing

  20. 开发以热代冷的超薄板品种,开拓热轧钢卷的新市场;

    Develop ultra thin product varieties to " replace cold rolled products by hot rolled one " and create new market for these hot rolled coils ;

  21. 自今年年初以来,美国热轧钢卷价格下跌5%,同时欧洲价格下跌13%。

    US hot rolled coil prices have fallen 5 per cent since the start of the year , while prices in Europe have dropped 13 per cent .

  22. 而后续热轧钢卷产生的边损、边裂、起皮等缺陷更是对产品的成品率和经济效益产生了明显的不良影响。

    The following defects , in hot-rolled coil such as the edge damage , edge cracks , will also make obvious effect in yield and economic benefits .

  23. 通过消除轧机辊系轴向间隙及调整精轧机工作辊的使用,改善热轧钢卷开平浪形。

    The shape wave of uncoiling and straightening hot-rolled strip was improved by eliminating the axial clearance of mill rollers and adjusting the working rollers of finishing mill .

  24. 阐述了应力腐蚀和冲刷腐蚀机理,提出了适用于热轧钢卷强制冷却过程出现的应力腐蚀现象的滑移&锈蚀理论,可以很好地解释热轧钢卷冷却后出现的腐蚀缺陷。

    Based on the stress corrosion , erosion mechanism and slippage-rust theory suitable to the stress corrosion of hot rolled coil during forced cooling , the coil corrosion defects are explained .

  25. 中国钢铁产能过大,这从普通钢材的价格变化中就可看出。例如,本地热轧钢卷价格今年以来下跌了五分之一。

    China has too much steel capacity . That is clear from the price movement of common steel products such as hot rolled coil , which is down a fifth in local terms this year .

  26. 通过钢辊轧制铅件模拟热轧钢件,研究了平辊轧制矩形件过程,轧件的宽高比、鼓形比和压下率三个参数对脱方的影响。

    This thesis studies the effect of wide & high ratio , bump ratio and reduction ratio on the skew ratio in plain roller rolling square bar through simulated hot rolling steel by steel roller rolling lead .

  27. 结果表明:热轧钢中的长条形夹杂物与基体剥离后形成的长条形孔洞在后续加载中,其周围产生的局部高应力应变集中及其相互作用使孔洞长大。

    The analysis results showed that , when the elongated voids due to the decohesion of the inclusions from base material were loaded subsequently , the local high stress and strain concentration around the voids and their interactions promoted the growth of voids .

  28. P可显著提高热轧IF钢的强度,但同时也导致其深冲性能降低。

    P enhances the strength of hot-rolled IF steel significantly , but it also reduces its deep drawability .

  29. 热轧型钢轧辊孔型样板的CAD/CAM一体化系统

    Integrated CAD / CAM System of Roll Pass Samples for Hot Rolling

  30. 热轧TRIP钢的加工工艺与残余奥氏体形成的关系

    Relation between Processing and Retained Austenite Formation of Hot Rolled TRIP-aided Steels