热喷涂

热喷涂FeAl涂层中纳米晶结构的XRD分析

XRD analysis of nanostructures in FeAl based coatings prepared by thermal spraying

热喷涂Zn-Al合金涂层技术是一项新发展起来的防腐技术。

Thermal spraying Zn-Al alloy coating method is a newly developed anticorrosive technology .

激光熔凝镍基热喷涂层残余应力的X射线衍射分析

Residual stress analysis for Ni-base thermal sprayed coatings with laser melting and consolidation

热喷涂方法对Al2O3涂层层状结构的影响

Effect of Spray Method on the Lamellar Structure of Al_2O_3 Coatings

热喷涂Mo、Al涂层界面的透射电镜研究

TEM Study on the Interfaces of Thermal Sprayed Mo and Al Coatings

反应热喷涂Al2O3陶瓷涂层在造纸设备上的应用

Research on Reactive Flame Spraying Ceramic Coating in Papermaking Machine

反应热喷涂Al2O3用于涂布刮刀的研究

Applied Research of Reactive Flame Spraying Al_2O_3 on Coating Blade

合金粉热喷涂式（CO2+N2）保护堆焊工艺及性能

Study on procedure and properties of co_2 + n_2 arc surfacing after thermal spraying of alloy powder

研究了反应热喷涂工艺及其制备的Al2O3金属陶瓷涂层的性能。

This paper studies properties of Al 2O 3 coating with reactive flame spraying .

热喷涂聚酰胺12/纳米SiO2复合涂层的非等温结晶动力学

Non-isothermal crystallization kinetics of thermal sprayed polyamide 12 / nano-SiO_2 composite coating

热喷涂MoS2/PA（聚酰胺）复合涂层的摩擦学性能及磨损机理研究

Tribological and Wear Mechanism of Thermal Spray MoS_2 / PA ( plyamide ) Composite Coatings

聚乙烯热喷涂防腐工艺在DMF储罐中的应用

The Application of PE Thermal - spraying Anticorrosion Technology in DMF Tanks

热喷涂涂层耐高温SiO2溶胶封孔剂的开发

Development of SiO_2 Sol Sealing Reagent Used for Thermal Spraying Coating at High Temperature

热喷涂用纳米ZrO2/Y2O3大颗粒球形粉末研究

Investigation of the Thermal Spray with the Large Agglomerated Spherical ZrO_2 / Y_2O_3 Powders of Nanocrystalline Structure

热喷涂A12O3-TiO2复合陶瓷涂层滑动磨损特性研究

Sliding Wear Behavior of Thermal - sprayed Al_2O_3 - TiO_2 Ceramic Coating

本文用X射线衍射法研究了45号钢基体上镍基热喷涂层经激光熔凝处理后的残余应力。

Residual stress analysis has been investigated for Ni-base thermal sprayed coatings with laser melting and consolidation ( LMC ) processing by means of X-ray diffraction ( XRC ) method .

工作条件对热喷涂制备的SOFC输出特性的影响

Effect of Operation Conditions on Power Output Features of SOFC Manufactured by Thermal Spray Processes

WC-Co热喷涂中温处理涂层的磨损机理为脆性微剥落和磨粒磨损。

The wear mechanics of WC-Co mid-temperature sintered coating is brittle spalling and abrasive wear .

热喷涂参数对喷涂WC-Co合金表面温度的影响

Analysis of Thermal Load and Surface Temperature in the Production of Thermally Sprayed WC-Co Coatings

结果表明：在干摩擦情况下，WC-Co热喷涂中温烧结涂层有一个比较稳定的磨损过程。

The results showed that , there was a steady process for WC-Co Mid-Temperature Sintered Coating .

AZ91D镁合金表面热喷涂陶瓷涂层研究

Research on thermal spray coating ceramics on surface of magnesium alloy

气浮沉积法简称AD法，是一种新近开发的表面涂层制备方法，属于热喷涂技术范畴。

The aerosol deposition ( AD ) method , which falls into the category of thermal spray technique , is a coating preparation method that has come into being just recently .

用冷喷Al2O3粉末、石墨粉末、Al粉末以及热喷涂的方式对收集器的收集效率进行了测试。

The collection efficiency of flat static recipients are tested using cold spraying Al_2O_3 powders , graphite powders , and Al powders as well as the thermal spray .

热喷涂稀土铝层及重熔处理20g钢抗腐蚀性能的研究

Study on Corrosion Resistance of Hot Spraying Rare-earth Al Layer and Remelt Treatment for 20g Steel

随着热喷涂技术的发展，FeS更加广泛的应用到各种金属、非金属以及复合材料上。

Meanwhile along with the development of thermal spraying , FeS is used wider in many kinds of material .

利用环块磨损试验机在不同载荷下对热喷涂Al2O3-TiO2复合陶瓷涂层的乳化液润滑滑动磨损特性进行了研究。

The sliding wear behavior of thermal-sprayed Al2O3-TiO2 ceramic coating has been investigated with a ring-on-block wear tester under different loads in emulsion lubrication sliding .

热喷涂工艺对Ni-Cr-Al涂层硬度性能的影响

Influence of arc spraying parameters on the property of hardness of Ni-Cr-Al coating

自蔓延高温合成技术与传统热喷涂技术相融合发展的SHS反应喷涂技术，近年来获得了迅速发展。

SHS reactive spray technology , which was developed through the combination of the SHS technology and the traditional spray technology , has been developed rapidly recently .

在AZ91D镁合金表面采用热喷涂工艺制备了锌铝涂层；

A protecting zinc and aluminum coating on the surface of AZ91D magnesium alloys was obtained by thermal spraying .

用热喷涂铝涂层保护的Hutton张力腿平台投产。

The Hutton TLP was installed with a sealed thermal-sprayed aluminum ( TSA ) coating .