铁基合金

钢和铁基合金通过等径弯曲通道变形（ECAP）可获得超细晶组织，从而改善材料的性能。

Steel and other iron-based alloys can have ultrafine grains and improved properties by equal channel angular processing ( ECAP ) .

近年来，强烈塑性变形特别是钢和铁基合金的等径弯曲通道变形因为具有获得超细晶组织和改善性能的潜力，引起了各国研究人员的很大兴趣。

Severe plastic deformation ( SPD ) processing , especially Equal-Channel Angular Processing ( ECAP ) of steel and other iron-based alloys , has achieved increasing interest recently because of the potential for obtaining ultrafine grains and improving the properties .

铁基合金锡、锌镀层厚度的X射线荧光光谱快速测定

Rapid Measurement of the Thickness of Tin , Zinc Coatings on Steel by X-Ray Fluorescence

原位合成TiN颗粒强化铁基合金粉末

Iron base alloy powder reinforced by in-situ synthesis TiN particulates

Nb2O5对铁基合金激光熔覆层裂纹敏感性的影响

Effect of Nb_2O_5 on the cracking susceptibility of laser-clad Fe-based coating

4169高温合金是一种添加了Nb的沉淀强化型镍-铬-铁基合金。

The superalloy 4169 is a niobium-added precipitation hardened Nickel-chromium-iron based alloy .

TiC弥散强化铁基合金粉末的研究

Study of TiC Dispersion Strengthening Fe Base Alloy Powder

原位生成TiC颗粒对铁基合金组织及性能的影响

Effect of In-situ Synthesis TiC Particle on Microstructures and Properties of Fe-based Alloy

为了便于设计石油膨胀管材料，推导了铁基合金ε马氏体的相变起始温度Ms（ε）的计算公式。

In the end , the equation for calculating the initial transformation temperature Ms (?) of the ε martensite of the Fe-based alloy is derived .

采用EDS研究了铈对铁基合金FeCrNiNbTiAlW晶界析出相MC中M组成的影响。

The effects of Ce on content of M in MC phase at grain boundaries in Fe-Cr-Ni-Nb-Ti-Al-W alloy have been studied by EDS.

TiO2的含量对铁基合金激光熔覆层组织和性能的影响

Microstructure and properties of laser cladding layers of Fe-based alloy doped with TiO_2 of different percentages

铁基合金中Cr（eq）/Ni（eq）对其激光熔覆层组织结构和开裂敏感性的影响

Effect of Cr eq / Ni eq composition on structure and crack susceptibility of laser clad Fe base coating

表面有Na2SO4沉积时铁基合金的低温热腐蚀行为

Low temperature hot corrosion behavior of iron base alloys in the presence of na_2so_4 deposit

Na2SO4-MgSO4-CaSO4沉积引起的铁基合金的热腐蚀Ⅰ.在空气中的腐蚀

Na_2so_4-mgso_4-caso_4 induced hot corrosion of iron base alloys ⅰ . corrosion behaviour in air

纳米M50钢是一种具有产业化前景的铁基合金新型材料。

The potential application of nanostructured M50 steel is also presented .

含Fe-Mo-B预合金粉铁基合金的温压成形与液相烧结

Warm compacting and sinter hardening behavior of an iron-based alloy consisting Fe-Mo-B pre-alloyed powder

三种铁基合金在液态Al-zn-Si中腐蚀行为的研究

Corrosion Behaviour of three Fe-based Alloy in Al-Zn-Si Bath

热处理对Cr-Mo-W-Mn-Ni铁基合金堆焊层硬度的影响

Effect of Heat Treatment on Hardness of Iron-based Cr-Mo-W-Mn-Ni Alloy Surfacing Layer

分别以纯Fe3Al粉、铁基合金粉+铝粉为原料，采用激光熔覆工艺在钢基体表面制备Fe-Al金属间化合物。

Two kinds of Fe-Al intermetallic coatings were prepared on steel substrate by laser cladding with powders of Fe_3Al and mixed powders of Fe-based alloy and Al .

介绍了卷扬机大型粉末冶金含油轴承的研制过程。重点讨论了低温烧结铁基合金Fe－Cu－Me的物理力学性能、成形模具结构和制品的耐久性与可靠性。

The present poper has introduced the developing process of large type P / M oilless bearings used in winch and put an emphasis on the physical and mechanical properties of Fe-Cu-Me alloy sintered at low temperature , die structure for forming , and durability and reliability of products .

Fe-Cr-Ni-Mn-Si不锈铁基合金的形状记忆效应

Shape memory effect in fe-cr-ni-mn-si stainless iron-base alloy

用声发射（AE）技术研究了铁基合金上几种常见氧化层在恒温氧化和随后冷却过程中发生的开裂及剥落行为。

The cracking and break up of some common oxide scales on the iron-base alloys during their oxidation at a constant temperature and in the subsequent cooling process has been studied by means of an acoustic emission ( AE ) technique .

为深入了解含Fe-Mo-B预合金粉的铁基合金的温压行为，研究了不同成形温度、不同Fe-Mo-B预合金粉含量对压坯密度、弹性后效以及样品显微组织和力学性能的影响。

For understanding the shaping behavior of iron-based alloy consisting Fe-Mo-B pre-alloyed powder during warm compaction ( WC ), the influence of the compacting temperature and the amount of Fe-Mo-B pre-alloyed powder on the green density , residual elasticity and microstructure was studied .

研究了稀土元素铈对铁基合金Fe-Cr-Ni-Nb-Ti-Al-W晶界析出相的数量、形貌、分布的影响及其与持久寿命的关系。

The influence of rare earth cerium atom on the amount , morphology and distribution of the grain boundary phase of Fe-Cr-Ni-Nb-Ti-Al-W alloy was investigated , and the relationship between the above characteristics and the stress rupture lifes of the test alloys was discussed .

铁基合金+WC激光熔覆层的显微组织与性能

Microstructure and properties of Fe-base alloy + WC laser cladding layer

纳米晶铁基合金的高频铁损行为分析

The behavior of high frequency core loss on iron-based nanocrystalline alloy

超声振动下铁基合金微观组织及性能研究

Study on Microstructure and Property of Iron-base Alloy under Ultrasonic Vibration

等离子熔覆添加碳化钨的铁基合金涂层的研究

Study on the Coating by Plasma Cladding Fe-based Alloy Added WC

铁基合金可见光谱特征及看谱分析研究

Investigation on Characteristics of Visible Spectrums of Ferroalloys and Spectroscopic Analysis

部分扩散铁基合金粉末的压缩性及烧结均匀化

Compactibility of partially Diffusion-alloying iron-based powders and their homogeneity after sintering