炭材料

应用EXCEL的规划求解工具计算炭材料生产的工作配方

Calculation formula for the manufacture of carbon materials with programming solver of Excel

对新型的炭材料的有机前驱体－RF气凝胶的合成工艺进行了探索研究。

Abstract : The synthesis processe of organic precursor-RF aerogel of new carbon material was studied .

Mn对炭材料中碳网络化结构形成的影响

Influence of manganese on formation of carbon network structure in carbon-bearing materials

碳纳米管（carbonnanotubesCNTs）是近几年来发展起来的一种新型炭材料。

In recent years , Carbon nanotubes ( carbon nanotubes CNTs ) developed a new type of carbon .

当以掺杂Ni的炭材料作为催化甲烷裂解的催化剂时，甲烷转化率随着反应时间逐渐增高。

When Ni doped carbon was used as the catalyst for CMD , methane conversion increased with the reation time .

TiO2光催化剂与多孔炭材料的复合，可以将吸附性能与光催化降解性能有机地结合在一起。

The adsorption and photo-catalytic performance can be enhanced by supporting TiO2 onto porous carbon materials .

最后，从热力学和表面化学出发，对蠕虫状EG为代表的多孔炭材料的吸油机理进行了探讨。

Finally , the adsorption mechanism of worm-like EG was discussed based on thermodynamics and surface chemistry .

合成的炭材料通过粉末X射线衍射仪、透射电子显微镜、N2物理吸附、扫描电子显微镜、热重分析等手段进行表征。

The obtained carbon materials were characterized by N2 physical adsorption , transmission electron microscopy , X-ray diffraction and scanning electron microscopy .

结合TEM和SEM图分析可知沉积法可以将铅均匀分布于炭材料表面和孔道中，优于机械混合法。

TEM and SEM images of modified carbons shows that lead can be evenly distributed in the carbon surface and pores by chemical deposition , while mechanical mixing could not .

PF与PVB共混炭化制备双电层电容器用多孔炭材料的研究

Study on the performance of porous carbon prepared by carbonization polymer blends made of PF and PVB and for the EDLC

以SBA-15为模板，蔗糖为碳源，合成出介孔炭材料。

The mesoporous carbon material is synthesized with the SBA-15 as template and with sucrose as cabon source .

在1450℃时，采用将炭材料直接浸入熔融Si金属形成SiC浓度梯度，通过溶胶－凝胶过程形成锆石和莫来石氧化薄膜。

SiC concentration gradient was formed by a direct dipping into a melt of Si metal at 1450 ℃ . Oxide thin films of zircon and mullite were formed through sol gel process .

本文以石油焦为原料，采用KOH活化法，制备出一系列孔结构不同的活性炭材料，以此作为超级电容器的电极材料。

Activated carbon with different pore architecture was prepared from petroleum coke by KOH activation and used as electrode materials of electric double-layer capacitor .

碳纳米管（CNTs）和石墨烯（Graphene）都是碳原子sp2杂化结构的新型纳米炭材料，它们由于具有优异的物化性能有望在各个领域得到广泛的应用。

Carbon nanotubes ( CNTs ) and graphene are sp2 hybridized carbon nanostructures which will make possible new applications in many fields duo to their extraordinary physical and chemical properties .

以酚醛树脂（phenol-formaldehyderesin，PF）和碳化硼（B4C）为原料的高温粘结剂对炭材料具有良好的粘接性能。

The high temperature adhesive composed of phenol-formaldehyde resin ( PF ) and boron carbide ( B 4C ) has satisfied bonding performances for carbon materials .

氟化是修饰和控制炭材料物理化学性质的有效方法之一，炭材料的多样性和宽范围的C-F键是氟化炭材料具有多种多样性质的基础。

Fluorination is one of the most effective chemical methods to modify and control physicochemical properties of diverse carbon materials .

通过SEM、EDS分析抗氧化涂层的结构和成分，探讨抗氧化机理。结果表明，采用浸渍法制备的PO4/纳米SiC复合涂层均匀致密，对炭材料的抗氧化性能有明显的提高。

Using SEM to observe its morphology and EDS to analyze the component and the oxidation resistance behavior , it revals that a uniform coating of PO_4 / nano-SiC formed is effective to improve the oxidation resistance of the carbon material .

经40%酚醛树脂处理的中密度板样品炭化物简称木陶瓷（WCS），是一种低成本而性能优异的新型多孔炭材料；

Woodceramics ( WCS ) is a new porous carbon material of low cost and excellent properties , which is obtained by carbonization of middle density fiberboard impregnated with 40 % PF resin .

本文以氧化聚合所得聚苯胺（PANI）为前躯体，通过炭化活化，制备出应用于超级电容器及锂离子电池负极的掺杂炭材料，研究了其电化学性能。

In this paper , doped carbon materials have been prepared from polyaniline ( PANI ) particles and polyaniline nanotubes obtained via still reaction by carbonization and activation . These carbon materials have been used for electrode materials of supercapacitors and lithium ion batteries . Their electrochemical performances were studied .

模压成形制备高电阻率炭材料

Research on carbon material with high resistivity prepared by die pressing

均匀设计原理在制备浸渍活性炭材料中的应用

The application of uniform design theory in preparing impregnated active carbon

炭材料的性质与炭-炭粘接性能关系的研究

Relationship between properties of carbon materials and joints ' adhesive performance

石油焦基活性炭材料的制备、表征及电容特性研究

Preparation , Characterization and Capacitive Properties of Petroleum Based Activated Carbon

炭材料在生物及医学应用中的研究进展

Development of application research of carbon materials in biology and medicine

综合分析了炭材料的性能及其在生物医学方面的应用，重点分析了炭材料的生物机械性能，特别是生物力学相容性。

The biomechanical and biocompatible properties of carbon materials were analyzed .

高分子基多孔炭材料的研究进展

The study progress of porous carbon materials derived from macromolecules

一种计算炭材料生产工作配方的新方法

A new method for calculating working formula in manufacture of carbon materials

生石油焦制备的多孔炭材料吸附性能及电热性能研究

Adsorption and Electrothermal Behavior of porous carbon prepared from green petroleum coke

炭材料惰性涂层方法分析

Analysis on the methods of inert coating of carbon materials

炭材料高温抗氧化研究进展

Progress in Research on Oxidation Resistance of Carbon Materials at High Temperature