油溶性

  • 网络fat-soluble;oil soluble
油溶性油溶性
  1. β-胡萝卜素为油溶性色素,不溶于水,易受光、热和空气等外界条件的影响,因此其在饮料等食品中的应用受到很大的限制。

    Since β - carotene is fat-soluble and does not dissolve in water and its color may be influenced under the outside environment , such as of light , heat and air , its application has been limited in liquid foods .

  2. 酸液油溶性暂堵剂XH-1的室内评价

    Oil soluble temporary plugging agent XN-1 for acidizing fluid : laboratory evaluation

  3. 油溶性金属Ni纳米微粒的制备与表征

    Preparation and Characterization of Oil-solubility Ni Nanoparticle

  4. 研究了利用大庆乙烯生产装置副产的C_9馏分合成油溶性石油树脂。

    Abstract This paper states that petroleum resin is synthesised by using fractions of C_9 , which are the by-product of Daqing ethene unit .

  5. 油溶性纳米Cu在微动磨损条件下的自修复行为与机理研究

    Study of Self-repair Property and Mechanism of Nano Cu as Lubricating Oil Additives under Oscillating Friction and Wear

  6. 油溶性AR型原油低温破乳剂的研究

    Research on oil-dissolving demulsifiers of AR type for lower temperature dehydration of crude oil

  7. 油溶性过氧化环己酮在FCC柴油氧化脱硫中的应用研究

    Study on using oil-soluble cyclohexanone peroxide in the oxidative desulphurization of FCC diesel fuel

  8. 油溶性Cu纳米微粒添加剂对几种商品润滑油摩擦性能的影响

    Effect of Oil-soluble Cu Nanoparticles as Additive on the Friction-reducing and Antiwear Ability of Several kinds of Commercial Lubricating Oil

  9. 油溶性纳米MoS2加氢催化剂的合成、表征和应用

    Synthesis , characterization and application of oil-soluble nanoparticle molybdenum disulfide hydrogenation catalysts

  10. 原油在管道中输送时,加入少量ppm的减阻剂,增输量可达到10%以上。用作减阻剂的油溶性聚合物,分子量一般高达几百万到上千万。

    Drag reducing agents are oil-soluble polymers with molecular weights ranged from several to ten million .

  11. 修井液用新型油溶性暂堵剂DFA的室内性能评价

    Laboratory evaluation on a new oil-soluble temporary plugging agent DFA for workover fluid

  12. 化学镀Ni-B或Ni-P镀层与油溶性有机钼添加剂的协同效应

    Synergistic Effects Between Electroless Ni B or Ni P Coatings and Oil Soluble Organic Molybdenum Additive

  13. 油溶性引发剂引发反相乳液聚合制备P(DMDAAC-AM)及其性能

    Preparation of P ( DMDAAC-AM ) by Inverse Emulsion Polymerization with Oil-soluble Initiator and Its Properties in Dilute Solution

  14. 耐高温油溶性有机树脂YC的室内研究

    Experiment Research of YC Oil-soluble Resin with High Temperature

  15. 在液体石蜡中采用微波技术原位合成了油溶性环烷酸铅(LN)和十二烷基水杨酸铅(LAS)。

    Oil soluble lead naphthenate ( LN ) and lead alkylsalicylate ( LAS ) were in-situ synthesized by microwave assisted-technique in liquid paraffin .

  16. 将表面具有聚丙烯酸酯自膨润型吸油网络结构的PET树脂切片(简称为留香剂)在油溶性香精中浸泡,香精就被吸附在留香剂表面,即得到芳香PET树脂母粒。

    When this fragrance retaining agent is dipped in oil dissolving essence , essence can be absorbed on the surface of it , then the fragrant PET matrix particle is attained .

  17. 表面分析结果表明,油溶性纳米Cu添加剂能够降低摩擦表面的显微硬度,并显著改善磨损表面的形貌。

    Surface analysis on the worn surface indicated that the microhardness of friction surface could be reduced and the state of worn surface could be obviously improved by adding the oil-soluble nano-Cu additive .

  18. 油溶性FPS节能减摩剂的研究(下)&二、发动机实机性能试验

    Study of Oil-Soluble FPS Type Friction-Reducer for Energy Saving & ⅱ . Testing Performance of Engine Test Rig

  19. 研究发现油溶性引发剂比水溶性引发剂更适合PUA体系的乳液聚合。

    It was found that the oil-soluble initiator is better than water-soluble initiator in the polymerization system .

  20. 为解决渤海湾海上油田渗透性漏失能堵不能解的技术难题,研制出新型油溶性暂堵剂DFA。

    To solve permeable loss problem in Bohai Gulf oilfield , a new oil-soluble temporary plugging agent DFA for workover fluid was worked out .

  21. 实验采用油溶性引发剂后使聚甲基丙烯酸甲酯的产率提高,通过透射电镜可以观察到大量密集的PMMA浅色颗粒。

    On the other hand , the productivity of PMMA was improved after using AIBN and we can observed plenty of PMMA particles through TEM which were separated from PANI particles .

  22. THY修井暂堵剂是以油溶性树脂作为桥堵剂,桥堵储层孔道,在井壁形成屏敝层.从而减少修井液的漏失。

    THY temporary plugging agent is used to bridge off reservoir pore , produce borehole wall shielding zone , and then reduce leakage of workover fluid by taking oil-soluble resin as bridging - off agent .

  23. 利用化学合成法在非水体系中制备了硬脂酸表面修饰的油溶性γFe2O3纳米颗粒;

    Stearic acid ( SA ) surface-capped γ - Fe 2O 3 nanoparticles were chemically synthesized in an anhydrous medium .

  24. 在油溶性纳米MoS2的合成中,表面修饰剂的选择最为关键。

    Selection of appropriate Surface-modifying material is a key factor to synthesis of oil-soluble molybdenum disulfide nanoparticles .

  25. 研究了油溶性配合物RuHCl(PPh3)3催化1-己烯双键异构化反应。

    The double bound isomerization reaction of 1-hexene catalyzed by RuHCl ( PPh_3 ) _3 was investigated .

  26. 用四球摩擦磨损试验机评价了油溶性γFe2O3纳米颗粒作为润滑油添加剂对液体石蜡减摩抗磨作用的影响。

    The effect of the synthetic product as additive in liquid paraffin on its friction-reducing and antiwear ability was evaluated on a four-ball machine .

  27. 本文通过对天然高分子材料进行改性,合成了GS-5油溶性材料,并和无机材料MD进行共混,制得了提高微细水泥渗透性的增渗外加剂GS-5~e。

    This paper synthesized the oil dissolved material GS-5 and mixed with the inorganic material MD to prepare the add-permeability additive GS-5e .

  28. 传统MoS2加氢催化剂粒径大、油溶性差而催化效率相对较低。

    Conventional molybdenum disulfide hydrogenation catalysts are inferior in catalytic efficiency due to their relatively larger particle size and lower oil-solubility .

  29. 用新方法合成了含S,P,Mo三种活性元素的油溶性有机化合物,并在四球机、Falex试验机上作了摩擦磨损试验。

    The oil soluble organo molybdenum compound containing active elements P , S and Mo was synthesized by a new method . Its antifriction and antiwear property was evaluated in Four Ball Ma - chine and Falex Machine .

  30. 用液相分散法制得了油溶性锡纳米微粒,平均粒径为40nm。

    Oil soluble tin nanoparticles with average diameter of 40 nm have been successfully prepared by solution dispersion method .