水轮发电机定子

水轮发电机定子水轮发电机定子
  1. GE公司大型水轮发电机定子绕组结构设计及安装特点

    The Characteristics of the Structure Design and Installation for Large Water Turbine Stator Winding Made By GE

  2. 对36MW/10.5kV水轮发电机定子绕组中注入上升时间为几ns至上百ns的模拟放电脉冲,得到相应的波形及频谱。

    In the experiment , the simulated discharge pulses with a rise time of several ns to nearly one hundred ns are injected into the single generator bars and the whole stator winding of a 36 MW / 10.5 kV hydro generator , the responses are reported respectively .

  3. 大型水轮发电机定子绕组单相接地故障及保护方案的研究

    Studies on Stator Ground Fault and Its Protection for Large-Sized Hydro-Generators

  4. 大型水轮发电机定子线棒气隙群放电的特性研究

    Discharging Characteristics of Air-gap Group in Stator Bars of Electrical Machinery

  5. 水轮发电机定子线圈电晕腐蚀规律与处理方法

    Corona Corrosion of the Hydrogenerator Stator Coil and Its Treatment Method

  6. 水轮发电机定子线圈通用冷却模设计

    The Design of General Die for Cooling Stator Coil of Hydrogenerator

  7. 三峡水轮发电机定子模态及稳定性分析

    Analysis on Stator Mode and Stability of the Three Gorges Hydro-Generator

  8. 三峡水轮发电机定子线棒防晕材料及防晕结构的研究

    Study on three gorge project hydrogenerator corona protection material and structure

  9. 终结论之终结浅谈水轮发电机定子端接头绝缘与处理

    Discussion on End Jointing Adapter Insulation and Treatment in Stator for Hydrogenerator

  10. 考虑电磁刚度时水轮发电机定子系统的振动

    Vibration analyses of hydrogenerator stator system when considering electromagnetic stiffness

  11. 水轮发电机定子绕组不对称支路电磁参数计算模型

    Calculation model of asymmetric - branches electromagnetic parameters for hydro-generator stator winding

  12. 一种检查水轮发电机定子绕组接头绝缘质量的方法

    An inspection method of insulation quality to hydro-generator stator coil

  13. 水轮发电机定子铁芯是由硅钢片叠合组装而成。

    Hydro-generator 's stator core is assembled by silicon-steel lamination .

  14. 研究结果对水轮发电机定子线棒的优化设计具有较大的参考价值。

    The results are helpful for the stator bar design of hydrogenerators .

  15. 水轮发电机定子应力-变形状态的分析&关于三峡水电站水轮发电机的设计问题

    Analysis on Stress and Deformation in the Stator Core of a Hydrogenerator

  16. 电网电压偏差对水轮发电机定子温度场的影响

    Impact of Network Voltage Deviation on Stator Temperature Field of Water Turbo-Generator

  17. 水轮发电机定子槽部温度场的计算

    A Study on Temperature Field of Stator Slot Portion in Hydroelectric Alternator

  18. 水轮发电机定子铁心压指松脱引发的事故

    The Faults Caused by End Fingers Loosening in Stator Core of Hydrogenerator

  19. 用有限元法计算水轮发电机定子铁芯的磁振动

    Calculation of Magnetic Vibration of Hydrogenerator stator core by Finite Elemental Method

  20. 水轮发电机定子系统磁固耦合双重共振

    The Double Resonances of Magnetism and Solid Coupling of Hydroelectric-Generator Stator System

  21. 水轮发电机定子绕组绝缘的老化特征和寿命预测

    Feature analysis and ageing forecast on stator winding insulator of hydroelectric generator

  22. 大型水轮发电机定子单相接地故障的暂态仿真

    Transient simulation for the stator ground fault of large-sized hydro-generator

  23. 水轮发电机定子绕组支路不对称磁势谐波分析

    Harmonic Analysis of Hydro - generator Asymmetric Stator Winding

  24. 水轮发电机定子蒸发冷却系统中两相流压降实验研究

    Experiment on Two-Phase Flowing Pressure Drop in the Evaporative Cooling System of Hydro-Generators

  25. 三门峡水轮发电机定子改造的工艺技术

    Techniques on stator alteration for Sanmen Gorge water-wheeled generator

  26. 水轮发电机定子绕组内部故障稳态电量仿真及其规律探讨

    Simulation and investigation of the internal armature winding faults of the hydro generator

  27. 水轮发电机定子线棒4种换位的分析与比较

    Analysis and Comparison of Four Transposition Methods in the Stator Bar of Hydrogenerator

  28. 水轮发电机定子线棒换位新方法研究

    New Methods for the Stator Bar Transpositions of Hydrogenerators

  29. 水轮发电机定子自循环蒸发冷却仿真计算与实验

    Numerical simulation and experiment for the CLSC evaporative cooling system of hydrogenerators stators

  30. 水轮发电机定子短路故障形式分析及其算法设计

    Short-Circuit Fault Modality Analysis of Hydraulic Generator Stators and Design of Corresponding Algorithm