模糊控制理论

  • 网络fuzzy control theory
模糊控制理论模糊控制理论
  1. 基于模糊控制理论的RED改进算法

    An Improved RED Algorithm Based on Fuzzy Control Theory

  2. 模糊控制理论在电解槽pH值控制中的应用

    Appliance of a Fuzzy Control Theory in pH Control of Electrobath

  3. 在第一部分中用于参数整定的方法主要有遗传算法、模糊控制理论、小波神经网络、DNA计算。

    In the first part , there are genetic algorithms , fuzzy control , Wavelet neural network theory , DNA computing .

  4. 以汽车道路模拟系统为研究对象,根据模糊控制理论,将模糊控制与常规的增量式PID控制相结合,设计出一套模糊自适应控制系统。

    The design method of the fuzzy adaptive system based on self-tuning parameters and fuzzy control theory is discussed .

  5. 其次,介绍了模糊控制理论和神经控制理论,模糊控制理论主要论述了二维模糊控制器的设计过程以及模糊自适应PID控制器的原理,神经控制理论重点叙述了BP神经算法的学习过程。

    The fuzzy control theory discusses the design process of the fuzzy controller and the principle of fuzzy adaptive PID controller .

  6. 依据模糊控制理论,利用MATLAB软件设计了两输入单输出的模糊控制器。

    According to fuzzy control theory , a fuzzy logic controller with two inputs and one output was designed by using MATLAB .

  7. 针对清扫车工作时盘刷调速问题,利用模糊控制理论,进行了盘刷调速Fuzzy控制器的设计研究。

    This paper deals with the adjustment of broom 's speed of the sweeper . The Fuzzy control theory was utilized to study and design of the Fuzzy Controller .

  8. 并结合经典PID控制参数整定不理想的情况,利用模糊控制理论,对模糊自适应整定PID参数进行了仿真研究;

    Under non-ideal condition of PID parameters determination , fuzzy - adaptive PID parameters is adjusted and simulated adopting fuzzy control theory .

  9. 介绍了模糊控制理论的基本概念以及其在废水处理pH控制系统中的运用。

    This paper introduces the basic concept of fuzzy control theory and its application in the pH value control system for waste water treatment .

  10. 因此提出了采用模糊控制理论和传统PID控制相结合的方法计算与评估,继而寻求平台姿态控制方法。

    In order to get better state control method , PID combine with fuzzy control theory are used in calculation and evaluation process .

  11. 基于模糊控制理论的水轮发电机组调速器侧PSS研究

    Study of Power System Stabilizer for Hydro-generator 's Governor Based on Fuzzy Theory

  12. 本文基于模糊控制理论基础,在分析了模糊控制原理和传统PID控制特点后,首先设计了简单模糊控制器。

    Firstly , referred the characters of fuzzy control principle and traditional PID control system , the simple fuzzy control system was laid out .

  13. 同时,在PID控制模型基础上,建立了电子调速器的仿真数学模型,提出了应用模糊控制理论来优化船舶主机的速度调节系统的思想。

    At the same time , the paper discussed the establishment of mathematics simulation model for Digital Governor DGS-8800 according to the traditional PID control model .

  14. 结合模糊控制理论和PID控制,本文提出用模糊自适应PID控制器实现对船用锅炉蒸汽压力的控制。

    The thesis combines the fuzzy control and PID control to bring forward use fuzzy self adapting for PID to control the steam pressure of boiler .

  15. 应用模糊控制理论,构造了用于判断等级分类的隶属函数,从而实现了苹果的等级分类:分别标为A、B、C三类。

    The theory of fuzzy control was used and the membership function was built to rate the grade of apples , which is fell into three grades : A , B , C.

  16. 结合当前的模糊控制理论,改变传统PID控制方法,采用PID控制器与模糊控制相结合的控制手段对锅炉燃烧进行控制;

    In connection with fast developing fuzzy control theory , a control method combined with PID control and fuzzy control was adopted instead of traditional PID control .

  17. 根据经典控制理论和模糊控制理论,分别设计精确停车PID控制器和模糊PID控制器。

    And then , the PID controller and the fuzzy PID control for high stopping accuracy will be designed by classical control theory and fuzzy control theory .

  18. 本文从同步发电机励磁控制系统原理入手,在深入学习PID控制与模糊控制理论之后,将两者结合起来,提出了基于模糊PID同步发电机励磁控制策略。

    After depth learning PID control and fuzzy control theory , proposed a synchronous generator excitation control strategy based on fuzzy PID , which combining the two .

  19. 在分析PID控制理论和模糊控制理论基本原理的基础上,综合它们的优点,设计了模糊自整定PID控制器。

    Combine their advantages on the basis of the analysis of the theory of PID control and fuzzy control theory the basic principles of fuzzy self-tuning PID controller .

  20. 本文研究利用可编程序控制器(PLC)和简化的模糊控制理论,通过脉宽调制(PWM)的方法来实现硫化温度的自动控制。

    The focus of the paper is on the applications of the predigested fuzzy control principle with a PLC and the method of PWM in controlling vulcanization temperature .

  21. 本文根据传统PID控制技术,结合模糊控制理论,设计出模糊PID控制器,并用来完成在复杂系统中的温度控制。

    According to the conventional PID control , combining to the contemporary fuzzy control theory , the fuzzy-controller was be designed and used to control the temperature in complicated system .

  22. 我们将模糊控制理论应用于PID控制器的设计,给出了参数可调整的模糊PID控制器的设计方法。

    We will use the fuzzy theory to the application of the PID controller design , and produced the fuzzy PID controller design method , in which the parameters might adjust .

  23. 研究了基于计算机技术的发动机进气调节系统的设计与实现,讨论了应用PID调节器和模糊控制理论实现压力和温度调控的理论与方法。

    This paper researches designing and realization of engine air-conditioning system . Air pressure is controled by PID conditioner and air temperature fuzzy control theory is introduced for air temperature conditioning .

  24. 在常规PID控制理论的基础上,本文重点研究了模糊控制理论,引入变论域思想,将三者结合起来,形成变论域模糊PID控制算法。

    On the basic of conventional PID control , this paper combines the fuzzy control theory and the thought of variable universe to form the variable universe fuzzy PID control algorithm .

  25. 本文针对沥青路面修复机控制系统,应用模糊控制理论与传统PID控制的原理,设计了一种基于单片机的模糊自适应PID温度控制器。

    This thesis , adopting Fuzzy Control Theory and the principle of Traditional PID Control , has designed a kind of Fuzzy-PID ( FPID ) self-adapting automatically temperature controller based on MCU .

  26. 根据模糊控制理论与CFB锅炉燃烧过程对基本控制量的控制要求,设计了基于自适应模糊控制的CFB锅炉燃烧过程控制系统。

    This thesis design CFB boiler combustion process adaptive fuzzy control system base on the basic knowledge of fuzzy control and CFB control requirements .

  27. 在分析了模糊控制理论的基础上完成了模糊推理系统的设计并仿真出了自适应模糊PID控制器,且将其应用到双闭环直流调速系统中。

    The thesis completed the design of fuzzy inference system and Adaptive Fuzzy PID Controller based on the analysis of fuzzy control theories , and applied it to the Dual-Loop Speed Regulation System .

  28. 运用模糊控制理论对重型商用车AMT起步建立模糊控制系统。

    The start AMT of Heavy-Duty Commercial Vehicle is set up fuzzy control system in which are used to the fuzzy theory .

  29. 将模糊控制理论与自适应控制理论应用于PID控制器的参数整定,使PID控制器的参数调节自动适应控制对象数学模型的参数变化。

    This paper uses the theories of fuzzy control and self ? adapting control to adjust the parameters of the PID controller by itself along with the variety of the mathematics model of the object .

  30. 然后进行了PID控制理论与模糊控制理论的比较与选择,最后通过电磁阀门控制暖气流量,以此来构成一个闭环控制保证控制量维持在设定的范围内;

    Secondly , comparison between fuzzy control and PID control is done , then the fuzzy control theory is selected . After that , valve is used to control the value of the central heating .