核壳乳液聚合

原位实时近红外光谱研究核壳乳液聚合过程

Research of Core-shell Emulsion Polymerization Using in-situ Near Infrared Spectroscopy

采用半连续预乳化核壳乳液聚合工艺合成了有机硅改性共聚乳液，研究了影响乳液性能的几种因素。

The title emulsion has been synthesized by use of semi-continuous pre-emulsifying core-shell emulsion polymerization process . Factors that influence the emulsion properties are studied .

MAA存在下VAc/BA核壳乳液聚合动力学研究

Core-shell polymerization kinetics of vinyl acetate and butyl acrylate in presence of methyl acrylic acid

MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

Development of Latex Morphology in the Process of Core-shell Emulsion Polymerization of Vinyl Acetate and Butyl Acrylate in the Presence of Methyl Acrylic Acid

本文根据核壳乳液聚合理论，以硅烷偶联剂表面处理的纳米SiO2为种子，采用优化的乳液聚合工艺，制备核壳型纳米SiO2-聚丙烯酸酯复合乳液，并以其为基料制备建筑涂料。

The title emulsion has been prepared based on mechanism of core-shell emulsion polymerization and silane coupling agent treated nano SiO_ ( 2 ) as seed through a optimized emulsion polymerization process , which is further formulated forming the architectural coatings .

近红外在线监测技术用于核壳乳液聚合的研究

In-Line Monitoring of Core / Shell Emulsion Polymerization Using Near-Infrared Spectroscopy

核壳乳液聚合工艺研究

Research on Polymerization Process of Core - Shell Emulsion

核壳乳液聚合技术在改进丙烯酸锌防污涂料中的研究

Polyacrylate Core-shell Emulsion Polymerization and Its Research on the Zinc Acrylic Copolymer Self-polishing Coating

半连续PVAc/PBA核壳乳液聚合表观动力学

The apparent kinetics of emulsion polymerization for pvac / pba core-shell in semi-continuous processes

最后介绍了核壳乳液聚合在涂料中的应用。

Finally applications in coating are introduced .

荧光探针法研究硅&丙核壳乳液聚合行为

Study on the Polymerization Behavior of Organosilicon-acrylate Latex with Core-shell Structure Using Fluorescence Probe Technique

兼性乳化剂，两性乳化剂破乳液剂，破乳[化]剂荧光探针法研究乳化剂对硅/丙核壳乳液聚合行为的影响

Study on the Effect of Emulsifiers on the Polymerization of Organosilicon-Acrylate Core-Shell Emulsion Using Fluorescence Probe Technique

采用核壳乳液聚合的方法制备低温自交联的无甲醛涂料印花粘合剂。

Low temperature self-cross-linking formaldehyde-free binder for pigment printing is prepared by means of core-shell emulsion polymerization .

核壳乳液聚合中甲基丙烯酸用量对印花制品的影响

A Study on the Effect of the Amount of Methacrylic Acid on the Printings in the Core-shell Emulsion Polymerization

饥饿态半连续VAc/BA核壳乳液聚合乳胶粒形态的演化模拟

Semi-continuous Starved Morphological Development Simulation ofPoly ( vinyl acetate ) / Poly ( butyl acrylate ) Core / Shell Latex Particles

介绍了核壳乳液聚合工艺的概念、合成机理、合成方法、影响因素以及测试方法。

The concept , synthesis mechanism , preparation method and test measure of the core-shell emulsion , along with factors affected the performance were introduced .

本论文采用核壳乳液聚合、细乳液聚合法制备贮存性稳定、具有良好疏水疏油性的含氟丙烯酸酯乳液，并对乳胶膜的结构和性能进行深入的研究。

In this work , fluorined acrylate polymers emulsion was prepared by core-shell emulsion polymerization , miniemulsion polymerization method . The structure and properties of latex film were investigated .

综述了近10年来核壳乳液聚合理论的发展，其中包括聚合机理：聚合物沉积机理和种子粒子表面聚合机理；

The developments of the theory on core ? shell emulsion polymerization during the past ten years have been summarized , which includes that polymerization mechanism-polymers aggradations and polymerization in the surface of particles ;

分析了丙烯酸酯乳胶粒子的类型，壳层中交联单体、有机氟单体、有机硅单体等掺量和核壳乳液聚合中可聚合乳化剂用量对丙烯酸酯外墙乳胶涂料耐沾污性的影响。

The effect of acrylate latex particle type , quantity of cross-linking monomer , organo-fluorine monomer and organosilicon monomer mixed into the shell , dosage of polymerisable emulsifier in polymerization of core-shell emulsion on stain resistance of acrylate emulsion coating for exterior wall are analyzed .

ASA核&壳乳液聚合研究Ⅲ聚合动力学和接枝率

Studies on ASA Core-shell Emulsion Copolymerization 3 . Polymerization Kinetics and Graft Degree

以醋酸乙烯酯（VAc）与丙烯酸丁酯（BA）为主要原料进行核壳乳液共聚合。

The core-shell emulsion copolymerization of vinyl acetate ( VAc ) and butyl acrylate ( BA ), was carried out .

研究了聚甲基丙烯酸甲酯－丁二烯－苯乙烯（MBS）核壳结构乳液聚合过程表面张力。

The surface tension of poly ( methyl methacrylate butadiene styrene )( MBS ) during emulsion graft polymerization was studied .

用核-壳乳液聚合方法制备了室温成膜低VOC丙烯酸类上光涂料。

A room temperature film formation and low VOC acrylic finishing coatings has been prepared by core-shell structure emulsion polymerization .

核-壳乳液聚合明显降低了胶膜断裂强度。

The core-shell emulsion polymerization reduced the breaking strength obviously .

核壳结构乳液聚合过程中确定补加乳化剂量的数学模型的建立

A Mathematical Model for Determination of Additional Emulsifier Amount in Core-Shell Emulsion Polymerization

核-壳乳液聚合及其在涂料中的应用

Core-shell emulsion polymerization and its application in coating

核-壳乳液聚合综述

A Review on Core - shell Emulsion Polymerization

运用核－壳乳液聚合方法制备了高弹性耐水喷棉胶。

Using core-shell emulsion polymerization have prepared the spraying cotton binder with high elasticity and water resistance .

文章从理论上确定了核壳结构乳液聚合过程中补加乳化剂量的计算方法

This paper has provided a method in theory by which additional emulsifier amount in core-shell emulsion polymerization can be calculated

研究了乳胶粒组成对含有缩水甘油基、羧基和胺基的丙烯酸酯多层核壳型乳液聚合稳定性的影响规律，探讨了聚合过程的凝聚机理。

The coagulation mechanism of the polymerization process and the effects of the particle composition on the stability of the emulsion copolymerization process of the latex containing glycidyl , carboxyl and amino groups were investigated .