杯形砂轮

本文包括杯形砂轮的磨粒切削模型、计算机模型，以及工艺参数的优化研究等内容。

Cup wheel is investigated in this paper which includes cutting model of abrasive particle , computer model of face grinding and optimization of technological parameters etc.

金刚石微粉烧结棒与杯形砂轮修整碟形金刚石砂轮的对比试验研究金刚砂土和粘合剂的混合物，能铸成旋转磨石。

Research and Contrast Experiment on Dressing Dish Diamond Grinding Wheel with Diamond Powder Sintered Bar and Cup Wheel a mixture of emery dust and a binder ; can be molded into grindstones .

CBN杯形砂轮端面磨削轧辊的磨削几何学分析

Geometrical analysis on the side grinding of steel roll with CBN cup wheel

小直径CBN杯形砂轮端面磨削沟槽底面的加工精度分析及其改善

Analysis of Machining Precision of Face Grinding Groove Bottom with Cup CBN Quill

D杯形砂轮与GC杯形砂轮交替配合使用可以大大提高碟形金刚石砂轮的修形效率和修锐效果。

Meanwhile , if the cup diamond wheel and cup GC wheel were used alternately , the dressing efficiency and surface quality can be improved enormously .

介绍了修整成形砂轮常用的金刚石笔修整、金刚石滚轮修整、GC杯形砂轮修整、点挤压修整、电加工修整方法的整形原理和特点。

In this paper , principles and characteristics of many dressing methods in the forming wheel dressing are summarized , for example , diamond point dressing , diamond roller dressing , GC-cup wheel dressing , point-press dressing and the electromachining dressing .

用GC杯形砂轮修整金刚石砂轮和CBN砂轮，是一种有效的修整方法，但这种修整方法的修整成形机理和被修整砂轮的廓形精度分析亟待解决。

It is a valuable method to true diamond or CBN wheel with a GC Cup Truer , but the mechanism of profile generation and analysis for the profile accuracy of trued wheel is still awaiting elucidation .

杯形砂轮精密磨削WC&Co涂层磨削力的试验研究

Experimental Research on Grinding Forces of WC-Co Coating by Cup Wheel

使用杯形砂轮进行磨削，可以获得较高的加工效率和表面质量。

Dressing CBN Wheel with Cup Wheel Dresser and Its Machining Property ;

杯形砂轮铣磨二次曲面的数学模型与误差分析

Mathematical Model and Error Analysis of Grinding Quadratic Surface With Cup Wheel

本文采用了D杯形砂轮与碟形砂轮对磨法来修整大直径树脂结合剂碟形金刚石砂轮。

The dressing experiments on large diameter dish diamond grinding wheel with cup diamond wheel was carried out and studied .

至于杯形砂轮的包装，请逐个在盒子外面用聚乙烯塑料膜将杯形砂轮包装好。

AS for the packing of the cup emery wheel , packed with the vinyl outside the box of one by one .

运用几何方法，推导了杯形砂轮铣磨二次曲面的数学模型和砂轮轨迹的计算公式。

Using geometric method , the mathematic model of grinding quadratic surface with cup wheel and the trace of the cup wheel are derived .

用杯形砂轮加工凹凸齿圆柱蜗杆时最小砂轮半径的确定基于高精度修磨轮包络精化圆柱蜗杆的理论研究

Determination of the Minimum Radius of a Cup Grinding Wheel In Machining Concave / Convex Cylindrical Worms THEORETICAL STUDY OF FINISH ENVELOPING CYLINDRICAL WORMS BASED ON HIGH PRECISION DRESSING GEARS

结果表明，杯形砂轮的修整效率高于金刚石微粉烧结棒的修整效率；杯形砂轮修整的碟形金刚石砂轮具有较高的磨削能力。

The results are concluded that the truing efficiency of cup wheel is higher than that of diamond powder sintered bar and the dish diamond grinding wheel dressed by cup wheel has better grinding performance .

杯形CBN砂轮端面磨削的自锐过程分析及磨削效果改善

Analyses on Self-dressing Process of Cup CBN Wheel in Face Grinding and Improving Wheel Grinding Performance

研究了用杯形GC砂轮修整器修整小直径CBN砂轮的成形机理和提高直线精度的方法。

This paper is intended to describe the mechanism of profile generation during process of being trued by the Cup Truer and the way to improve the truing accuracy of the CBN quill .

细粒度、中等浓度的青铜结合剂杯形金刚石砂轮与粗粒度、高浓度的杯形砂轮修整碟形砂轮相比，后者具有较好的修形效果和修整效率；

Comparing small grain size and middle density of cup wheel with big grain size and high density of cup wheel , the latter has better truing efficiency and dressing surface quality .

金属结合剂杯形小直径CBN砂轮端面磨削沟槽底面时砂轮的自锐效应

Effect of CBN wheel self-dressing in face grinding of groove bottom with metal bond cup CBN quill

以曲线沟槽的磨削加工为目的，本文对金属结合剂杯形小直径CBN砂轮端面磨削沟槽底面时的砂轮自锐（Self-dressing）过程进行了研究。

In order to grind curved grooves , the study on t he self-dressing process of metal bond cup CBN small diameter wheel ( cup CBN qu ill ) in face grinding grooves bottoms is carried out .