材料力学性能

微米/纳米尺度的材料力学性能测试

Measurements on mechanical properties of materials with micro / nano-meter scale

基于模糊聚类的材料力学性能确定方法

A method of substituting mechanical properties of materials based on Fuzzy Clustering

应变率对Cf/Al金属基复合材料力学性能的影响

Effect of Strain Rate on Mechanical Behavior of C_f / Al Composites

关于｛x／n｝的分布组分梯度复合对水泥基材料力学性能的影响

Effect of the component gradient distribution on the strength of cement-based composite materials

SiCP/Al复合材料力学性能及显微结构分析

Mechanical properties and microscopic analysis of SiC_P / Al composites

热循环对挤压态SiCw/AZ91镁基复合材料力学性能的影响

The thermal cycling on mechanical properties of extruded sic_w / az91 Magnesium Matrix Composites

添加Al2O3对SiC板粒／Y－TZP复合材料力学性能的影响

Effect of Al_2O_3 Addition on Mechanical Properties of SiC-platelet / Y-TZP Composites

HDPE基木塑复合材料力学性能的研究

Research on the Mechanical Properties of Wood-Plastics-Composite Based on HDPE

而APP的用量对材料力学性能的影响较大。

The mechanical properties of PP / APP composite is greatly influenced by APP content .

MoS2对镍基复合材料力学性能的影响

Mechanical properties of Ni-based alloy / W / MoS_2 composites

TiC复合添加剂对铁基粉末冶金结构材料力学性能影响的研究

The effect of TiC composite additive on mechanical properties of PM ferrous structural materials

通过常压烧结制备了Al2O3/Y-TZP复相陶瓷，研究了Al2O3含量对材料力学性能及耐磨性的影响。

Al_2O_3 / Y-TZP composites were prepared by pressureless sintering . Effects of material composition on mecha ?

ZA22/Al2O（3f）复合材料力学性能的神经网络模拟研究

Neural Network Simulation on Mechanical Properties of ZA22 / Al 2O 3f Composites

含ZrO2添加剂对方镁石-尖晶石耐火材料力学性能的影响

Effect of ZrO_2 bearing additives on mechanical properties of periclase spinel refractories

SiC晶须含量对ZTA陶瓷基复合材料力学性能和抗热震性能的影响

Effect of SiC Whisker Content on Mechanical Properties and Thermal Shock Resistance of ZTA-Matrix Composites

添加剂对快速CVD抗氧化C/C复合材料力学性能影响

The Effect of Additives on Mechanical Properties of Oxidation - Resistant C / C Composites Prepared by Rapid CVD

莫来石晶种对反应烧结ZrO2/莫来石复合材料力学性能的影响

Effect of Mullite Seeds on Mechanical Properties of Reaction-Sintered ZrO_2 / Mullite Composites

研究了表面己内酰胺稳定化并阴离子接枝PA6的CF对PA6/CF复合材料力学性能与破坏形态的影响。

The effect of surface treating on the mechanical properties and failure morphology of PA6 / CF composites was investigated .

采用PA6短纤维在较低掺量情况下对水泥基材料力学性能及耐久性进行了研究，并与Nycon纤维进行对比。

In this paper , the mechanical properties and durability of cement matrix material with low content of PA6 fiber were investigated .

研究了基体韧性、纳米CaCO3直接填充与用CPE包覆后填充PVC对复合材料力学性能的影响，并对其微观结构进行了探讨。

Influences of matrix ductility , nano CaCO 3 and CPE encapsulated nano CaCO 3 filled PVC on the mechanical properties of the composite were studied .

连续相组分梯度分布对水泥基材料力学性能的影响结果表明：PMMA组分呈从膜表面到底面逐渐增多的梯度分布。

Effects of continuous component gradient distribution on mechanical strength of cement-based materials as the result , pmma aggregated to the bottom of the film .

重点探讨了Mg（OH）2与复合阻燃剂的阻燃效果及其对LLDPE/EPDM复合材料力学性能、加工性能的影响。

The flame retardant effect of Mg ( OH ) _ 2 and compound flame retardant on LLDPE EPDM system , as well as their influence on the mechanical property and processability were emphatically investigated .

介绍了基于VRML的材料力学性能检测虚拟实验的设计思想和设计原理，对关键技术进行了阐述和分析。

The design idea and elements of a VRML-based virtual experiment for material mechanical performance testing is introduced . The key technology is analysed and expatiated .

利用碳纳米管（CNTs）对酚醛树脂（PF）进行改性，研究了CNTs含量对PF/碳纤维（CF）复合材料力学性能的影响。

Phenolic resin ( PF ) is modified by carbon nanotubes ( CNTs ), and the effects of CNTs content on the mechanical properties of PF / carbon fiber composite are studied .

通过SEM、拉伸断裂行为、表面电阻、DMA（动态热机械分析）和维卡软化温度测试，研究了半硬质PVC/炭黑（CB）材料力学性能、电性能、热性能和微观形态。

Semi-rigid polyvinyl chlorid ( PVC ) / carbon black ( CB ) composites were prepared , their properties were studied by SEM , stress-strain behavious , surface resistivity , DMA and Vica soften temperature tests .

研究了纳米SiO2在环氧树脂中的均匀分散工艺，探讨了超声波振荡和超声波分散时间对纳米SiO2/EP复合材料力学性能的影响，确定了最佳分散工艺。

In this paper , the uniform dispersion of nanometer-SiO_2 in epoxy resin was studied . The influence of ultrasonic-wave oscillations and ultrasonic dispersion time on the mechanical performances of nanometer-SiO_2 / EP composite was discussed .

ZrB2-SiC-AlN超高温陶瓷材料力学性能及抗热震性能研究

Mechanical Properties and Thermal Shock Resistance of ZrB_2-SiC-AlN Ultrahigh Temperature Ceramics

回火温度对18-18-N护环材料力学性能的影响

The Effect of Tempering on Mechanical Properties of Retaining Ring Material 18-18-N

采用SEM、TEM、DSC及材料力学性能实验方法研究了马来酸酐（MAH）接枝乙烯-辛烯共聚物弹性体（POE）对PA66/POE共混材料形态、微结构及力学性能的影响。

The effect of maleic anhydride ( MAH ) grafted POE ( Polyolefin Elastomer ) on the morphology , microstructure and mechanical properties of PA66 / POE blends was investigated by means of SEM , TEM , DSC and mechanical properties measurement .

详细研究了纳米TiO2含量及表面处理对制备的纳米复合材料力学性能、热学性能、流变性能、阻燃性能、热老化性能等的影响。

The effect of nano-TiO2 content and its surface treatment on the mechanical properties , thermal property , rheological behaviour , flame - retardancy , heat aging behaviour of HEPS / nano-TiO2 / TAS composites have been studied in detail .