机械效率

jī xiè xiào lǜ
  • mechanical efficiency
机械效率机械效率
  1. 2K-H针摆行星传动机械效率的数学建模

    Mathematical modeling of 2K-H NEEDLE-CYCLOID planetary transmission mechanical efficiency

  2. 为解决汽车座椅调角器自锁性能不稳定的问题,研究具有齿侧间隙的一齿差2K-H摆线针轮行星传动的正、逆传动机械效率的计算方法。

    The calculation method of positive and negative transmission mechanical efficiency of one tooth difference 2K-H cycloid-needle planet transmission with backlash is studied for the solution to the problem of self-locking performance instability of adjustable-angle mechanism of seat on automobile .

  3. 自主式水下航行器(AUV)对于人类开发海洋资源十分重要,作为关键部件的推进器一般采用螺旋桨和叶轮原理,存在机械效率低、噪音大、机动运动性差等缺点。

    Autonomous underwater vehicles ( AUV ) are quite important for the human being to develop the marine resources .

  4. 利用该模型所求出的转化机构效率计算了2K-H行星轮系的机械效率,并开发效率计算的应用程序。

    The mechanical efficiency of 2K-H epicyclic gear train is obtained through the efficiency of the converted mechanism calculated by mathematical model presented . Computerized program of the efficiency calculation is developed .

  5. 通过对QL系列循环泵在盐硝联产装置的使用和调试情况,介绍了QL系列循环泵具有机械效率高、结构性能好、使用寿命长等优点。

    Based on the utilization and commissioning of QL circulation pumps in the facility of co-production of salt and Glauber salt , this paper introduces such advantages of QL circulation pumps as high mechanical efficiency , reasonable structure performance and long service life etc.

  6. 为进一步提高这一多回路、多输出、闭链结构系统的工作平稳性和机械效率与寿命,降低制造成本,对Stephenson型同轴式双输出六杆函数发生机构进行了创造性的自调结构设计。

    To improve the stabilization , mechanical efficiency and lifespan of this multiple loop , multiple out-put and cycle structural system and reduce the manufacturing costs , the coaxial six-bar double out-put function generation mechanism ( Stephenson model ) has been innovatively designed on self-adjusting method .

  7. 矩形截面叶片密封可靠性和机械效率的数值研究

    Numerical Research on Sealed Reliability and Mechanical Efficiency of Vane Seals

  8. 抽油机地面机械效率同步检测技术研究与应用

    Synchronous detection technology for the surface mechanical efficiency of beam units

  9. 计算传动系统机械效率的通用公式

    General Formula for Computing Mechanical Efficiency of Mechanical Transmission System

  10. 以汽油机为对象,研究富氧燃烧对其指示功率、机械效率、油耗等性能指标的影响。同时考虑制氧能耗,分析汽油机富氧燃烧时的总能耗。

    The characteristics of gasoline engine under oxygen enrichment combustion are investigated .

  11. 运输式柴油机节能技术与机械效率

    Energy-saving Techniques of Transport Diesel Engine and Their Relation to Engine Mechanical Efficiency

  12. 考虑摩擦时钻井泵的动力分析及机械效率的计算

    Dynamic analysis and mechanical efficiency calculation of drilling pump in consideration of friction

  13. APPLE-Ⅱ微机机械效率测试系统

    The Testing of Mechanical Efficiency on Computer APPLE ⅱ

  14. 直喷式柴油机机械效率的数值计算与研究

    Numerical Calculation and Study of Mechanical Efficiency for Direct - Injection Diesel Engine

  15. 柴油机功率和机械效率非接触式测量方法

    Non-contact Measuring Method of Power Output of Diesel Engine and Its Mechanical Efficiency

  16. 在农机化作业中,农业机械效率的高低,决定获取效益的高低;

    In the agriculture mechanization , mechanical efficiency determined the level of benefits ;

  17. 链条产品的摩擦对链条产品的寿命和机械效率影响很大。

    Friction of chains has a great influence on life and mechanical efficiency .

  18. 有自锁性能机械效率的探讨

    Study on the Mechanical Efficiency of Self-Locking Mechanisms

  19. 应用均匀化方法,探讨以机械效率为优化目标的柔顺机构的设计方法。

    Using homogenization method , an optimization design method of compliant mechanisms is studied .

  20. 机构的速比对机械效率的影响

    The Effect of Speed Ratio on Machine Efficiency

  21. 在归纳分析水力效率、容积效率和机械效率的估算公式的基础上,对照实验结果进行了筛选,并给出了使用建议。

    The hydraulic efficiency formula , volume efficiency formula and mechanical efficiency formula are analyzed .

  22. 钢丝绳手扳葫芦的机械效率

    Mechanical efficiency of wire-rope lever block

  23. 船舶在波浪中航行时沿船体纵向布置齿轮机构的机械效率

    Mechanical efficiency of the gearing arranged along the longitudinal direction of the ship navigating in wave

  24. 轴向间隙影响着叶片式气动马达的容积效率和机械效率。

    Axis - direction clearance influences the volumetric efficiency and the torque efficiency of pneumatic vane motor .

  25. 机床齿轮副机械效率计算方程组

    A Group Equations for Calculating the Machinery Efficiency of the Gear pair in the Machine Tool Gearing

  26. 提出利用平衡品质可评价旋转机械效率。

    The rotating machine efficiency can be evaluated by the balance quality in the actor is made .

  27. 高速齿轮副机械效率与主动轮转速的关系

    Relationships Between the Machinery Efficiency of the High-Speed Gear Pair and the Speed of the Driving Gear

  28. 并可用于估算外啮合齿轮泵的机械效率。

    The method can be used for estimating the machine efficiency of a gear pump with external mesh .

  29. 同时文章提供了减少一道气环后提高机械效率的试验数据。

    This paper also showed the test data of the raised machanical efficiency after eliminating one compression ring .

  30. 航行中船舶纵向齿轮机构机械效率的实验验证

    Verifying mechanical efficiency of the longitudinal gearing along the ship in navigating by the use of experimental method