无机涂层

wú jī tú cénɡ
  • inorganic coating
无机涂层无机涂层
  1. 电工钢表面耐高温绝缘无机涂层的制备和表征

    Preparation and Characterization of Electric Resistant at High Temperatures Inorganic Coating for Electric Steel

  2. 在45钢基体上制备出耐磨性能优越的高温耐磨抗蚀无机涂层。

    Prepares the wear-resisting performance superior high temperature wear-resisting anti - eclipse inorganic coating in the 45 # steel substrate .

  3. TiO2-K2SiO3无机涂层对空间材料Ag的防护行为研究

    Study on the Protection of TiO_2-K_2SiO_3 Inorganic Coatings for Ag Used in Space

  4. 低碳钢表面改性用耐磨无机涂层的研究煤是一种有机沈淀岩,主要包括有机碳化合物和无机矿物。

    Modification of Low-Carbon Steel with Hard-Wearing Inorganic Coating Coal is a sedimentary rock composed principally of organic carbonaceous macerals and inorganic minerals .

  5. 无取向硅钢表面绝缘涂层分成有机涂层、无机涂层和半无机涂层三大类。

    The surface insulation coating of non oriented silicon steel is comprised of the organic coating , mineral coating and mineral filled organic coating .

  6. 涂层材料一般分为无机涂层(金属涂层)和有机涂层,无机涂层一般又分为保护涂层和功能涂层两大类。

    Coating materials can be divided two parts : inorganic coatings ( metal coatings ) and organic coatings . Inorganic coatings include protecting coatings and functional coatings .

  7. 近年来,随着科技的发展,对材料与零部件的要求越来越苛刻,耐腐蚀的高性能无机涂层被广泛应用于各种金属表面的防腐与防护。

    In recent years , with the development of technology , the requirements to materials and components are increasingly demanding . High-performance corrosion-resistant inorganic coatings are widely used in the protection of metal surfaces .

  8. 半无机涂层基本成分为磷酸盐、铬酸盐、乳胶树脂溶液、弥散促进剂和表面活性剂,其中弥散促进剂和表面活性剂对涂层的质量具有重要作用。

    The general composition of the mineral filled organic coating consists of the phosphate , chromate , emulsion resin solution , dispersion accelerating agent and surface active agent , the last two among them play an important role in coating quality .

  9. 在环氧清漆覆盖条件下,无机富锌涂层中Zn粉的反应活性比有机富锌涂层中Zn粉的高,即Zn粉的反应速度更快。

    Under the epoxy topcoat , the corrosion rate of the zinc powder in inorganic zinc-rich coatings is faster than that in organic type .

  10. 高温无机润滑涂层的研究进展

    Survey of Researching Development for Inorganic Lubricating Coatings with High Temperature Resistance

  11. 研究了低温无机陶瓷涂层的制备工艺过程。

    The preparation process of low-temperature ceramic coating was studied .

  12. 钢铁构件表面上的无机富锌涂层

    Inorganic Zinc-Rich Coatings on Steel Structural Components for Preventing Corrosion

  13. 仿生合成是制备无机陶瓷涂层的新途径。

    Biomimetic synthesis is a new process of fabricating inorganic ceramic coating .

  14. 铝合金表面不燃有机-无机复合涂层的制备与表征

    Preparation and Characterization of Noncombustible Organic-inorganic Composite Coating Applied on Aluminum Alloys

  15. 含硅有机-无机复合涂层对铝合金的保护作用

    Protection of Aluminum Alloys by Silicate-Based Organic-Inorganic Hybrid Coatings

  16. 施工于适当处理的钢材表面上,或直接施工于状态良好的无机富锌涂层之上。

    Apply on properly blast cleaned steel or directly over inorganic zinc coating in good condition .

  17. 有机亲水铝箔表面为天蓝色,无机亲水涂层表面为灰白色或亚白色。

    Organic hydrophilic foil surface is sky blue , inorganic hydrophilic foil is grey white or sub-white .

  18. 研究表明:在模拟的桥面雨水环境下,电弧喷锌涂层为均匀腐蚀,无机富锌涂层和环氧富锌涂层为点腐蚀。

    The uniform corrosion mechanism for arc spraying zinc coating and dot corrosion mechanism for inorganic and epoxy rich zinc coatings are summarized .

  19. 以合成的水性有机硅改性硅溶胶为基料,在铝合金表面制备了一种具有良好理化性能的不燃有机-无机复合涂层。

    The preparation and their application in papermaking of aluminium modified silica sol ( AMS ) and boron modified silica sol ( BMS ) were first investigated in China .

  20. 650℃涂层晶化已趋于完整,最终得到的涂层物相结构为LiCoO2。两种途径制备的锂钴复合氧化物都具有良好的高温耐蚀性能,无机途径涂层的耐蚀性又略好于有机途径涂层。

    At 650 ℃, the coatings trended to completely crystallize and get a final phase composition of LiCoO_2 . The two coatings made by organic and inorganic ways were better than stainless steel in terms of the corrosion resistance .

  21. 用Sol-Gel法在PC上制备有机-无机复合耐磨涂层

    Abrasion Resistant Inorganic / Organic Coating Materials Prepared by the Sol-Gel Method

  22. 结果表明,无机硅酸锌涂层的结构为:Zn粉颗粒间以SiOZn聚合物网络键合,涂层与底材钢基体间是以化学键结合的微观多孔的涂层结构;

    The results show that the structure of inorganic zinc silicate coatings was porous microstructure with Si O Zn polymer bond among zinc powders and chemical bond between the coatings and steel substrate ;

  23. 综合从耐蚀性、电化学保护的角度来看,304(氮气保护)喷涂层、316L喷涂层都表现出与无机富锌硅酸盐涂层有良好的匹配性。

    Integrated from the corrosion resistance , electrochemical protection , 304 ( nitrogen protection ) spray coating or 316L spray coating have shown good matching with inorganic zinc silicate coating .

  24. 无机硅酸锌涂层是一种广泛使用的钢铁重防腐涂层。

    Zinc silicate coatings is widely used for the corrosion protection of steel .

  25. 钛合金构件配合面无机防粘涂层的研究与应用

    Development and Application of Inorganic Stop-Off Coating of Machining Surfaces of Ti Alloy Structure

  26. 超细锌粉无机硅酸锌涂层的结构及耐蚀性研究

    Structure and Corrosion Resistance of Inorganic Zinc Silicate Coatings Based on Super-Fine Zinc Powder

  27. 纳米粒子的分散对于其功能的实现尤其重要,特别高透明性有机-无机纳米复合涂层的制备。

    Excellent dispersion of nanoparticles without agglomerates or aggregates is essential to exert their roles best , especially for the preparation of transparent organic / inorganic nanocomposite coatings .

  28. 在微波电离型原子氧(AO)源地面模拟设备中对空间材料Kapton及SiO2-K2SiO3无机-有机复合涂层进行原子氧剥蚀效应试验。

    Atomic oxygen erosion of spacecraft materials and protection by coatings were studied in the ground-based simulation facilities .

  29. 超细无机粉体对涂层玻纤布耐碱性能的影响

    Study on High Alkali-Resistance of Coating Glass Fabrics with Ultrafine Powder

  30. 无机微滤膜纳米涂层修饰改性与仿生化学模拟研究

    Study on Inorganic Microfiltration Membrane Modification by Nano-coating and Biomimetic Simulation