无取向硅钢

  • 网络non-oriented silicon steel
无取向硅钢无取向硅钢
  1. BOF-RH-CC工艺生产无取向硅钢过程中夹杂物行为的研究

    Research on Behavior of Inclusions in Non-oriented Silicon Steel in BOF-RH-CC Route

  2. 磁性邻近径向测井仪磁场退火对无取向硅钢磁性能的影响

    Effects of Electromagnetic Annealing on Magnetic Properties of Non-oriented Silicon Steel

  3. 微量Ti对冷轧无取向硅钢片磁性的影响

    Effect of trace amount of titanium on the magnetism of cold rolled nonoriented silicon steel sheet

  4. 电炉CSP工艺开发无取向硅钢热带钢的技术可行性探讨

    The Feasibility Discussion on the process of EAF - CSP exploiting non - orientation Si steel hot rolled strip

  5. 冷轧无取向硅钢再结晶退火过程的EBSD分析

    EBSD investigation of cold-rolled non-oriented silicon steel in recrystallization annealing process

  6. 无取向硅钢晶粒与晶界特征的EBSD分析

    Analysis of the characteristics of grains and grain boundaries in the non-oriented steel by EBSD

  7. 通过金相法和磁声发射法(MAE)研究了高牌号无取向硅钢脱碳退火时所产生的内氧化层。

    The subsurface oxide layers generated during decarburizing annealing of high grade non-oriented silicon steel sheet were studied by metallographical method and magnetoacoustic emission method ( MAE ) .

  8. 在实验室首次模拟CSP流程生产出中高牌号的无取向硅钢,对铸坯的铸态组织及夹杂物形貌、大小及类型作了初步讨论。

    Through simulating the CSP process in laboratory , the high grade non-oriented silicon steel was produced . The cast structure and the pattern , size and type of the inclusion of casting slab were discussed .

  9. 利用Bitter粉纹法观察了未经磁化、受力程度不同的无取向硅钢片和20钢试件的磁畴结构,对比分析了应力对磁畴的影响。

    The magnetic domains of silicon steel sheet and 20 carbon steel samples , which have subjected to various loads , have been observed with the Bitter method , and the effects of stress on magnetic domains of the two steels were analyzed comparably .

  10. 利用MMS-200热模拟试验机进行单道次压缩实验,绘出了无取向硅钢W20和W30的应力-应变曲线,分析了变形温度、变形速度和变形程度对变形抗力的影响规律。

    Base on single pass reduction experiment carried out by MMS-200 thermal-mechanical simulator , the curves of stress-strain have been drew and We also analyzed the influence of the effect of deformation temperature 、 strain rate and strain on deformation resistance .

  11. 提高热连轧无取向硅钢轧制稳定性研究

    Study on Rolling Stability of Silicon Steel in Hot Continuous Rolling

  12. 对无取向硅钢成品材再次热处理的探讨

    Discussion on the Reheat Treatment of Products of Non-Orientation Silicon Steel

  13. 冷轧无取向硅钢片电磁性能的控制

    Control of magnetic properties on cold-rolled non-oriented silicon steel sheets

  14. 半工艺无取向硅钢加临界变形的织构演变

    Texture evolution of semi-processed non-oriented silicon steel with temper rolling

  15. 无取向硅钢板形质量要求日趋严苛。

    The quality criterion of non-oriented silicon steel becomes strictly .

  16. 稀土金属在无取向硅钢中的作用

    The effect of rare earth metals in non-oriented silicon steel

  17. 无取向硅钢片磁致伸缩特性的实验研究

    Laboratorial Study on Magnetostriction Characteristics of Non-oriented Silicon Steel Sheet

  18. 高纯度冷轧无取向硅钢冶炼技术的发展

    Development of refining technologies for high cleanliness cold rolled non-oriented silicon steel sheet

  19. 无取向硅钢片非常规处理工艺的探讨

    Exploration in Non-conventional Process of Non-oriented Silicon Steel Sheet

  20. 轧制条件对冷轧无取向硅钢织构的影响

    Effect of Rolling Process on Texture Evolution of Cold Rolled Non-Oriented Silicon Steel

  21. 冷轧无取向硅钢的织构和组织性能分析

    An Analysis on Texture and Structure Property of Cold Rolled Non-Oriented Silicon Steel

  22. 窄带状冷轧无取向硅钢片磁性能测量的方法研究

    Study on Magnetic Property Testing Method of Narrow Cold-rolled Non-oriented Silicon Steel Sheet

  23. 无取向硅钢退火织构的演变与磁性能关系的研究

    Relation between evolution of annealing texture and magnetic property of non-oriented silicon steel

  24. 冷轧无取向硅钢热带钢生产工艺研究

    Research on Production Technology for Cold Rolled Non-orientation Si Steel Hot Rolled Strip

  25. 成品厚度对无取向硅钢织构和磁性能的影响

    Effect of Product Thickness on Texture and Magnetic Properties of Non-Oriented Silicon Steel

  26. 含硼冷轧无取向硅钢的研制

    Research and production of boron bearing cold rolled non - oriented silicon steel

  27. 冷轧无取向硅钢的实验研究

    Experimental research on cold rolling non-oriented silicon steel

  28. 电磁搅拌工艺在冷轧无取向硅钢的开发及应用

    Development and Application of EMS Process for Cold Rolled Non - Oriented Silicon Steel

  29. 无取向硅钢热轧工作辊磨损预报模型

    Work roll wear prediction model of non-oriented electrical steel sheets in hot strip mills

  30. 蚀坑法研究冷轧及退火工艺对无取向硅钢织构演变的影响

    Pit etching research about rolling and annealing treatment on texture in non-oriented silicon steel