折弯机

  • 网络Bending machine;bender;press brake
折弯机折弯机
  1. 在本文所设计的母线折弯机控制系统中采用了PLC作为控制核心及触摸屏作为人机交互界面。

    In this paper , the control system of the busbar bending machine use PLC as the central core and touch-screen as man-machine interface .

  2. 基于MSP430单片机的折弯机控制器设计

    The Design of Bending Machine Controller Based on MSP430

  3. 基于PC总线的折弯机柔性数控系统

    Press Brake Flexible Numerical Control System Based on PC Bus

  4. 应用PLC改造大型液压折弯机电控系统

    Rebuild of electrical control system of large-scale hydraulic presses machine tool with PLC

  5. CNC折弯机创造高效益

    CNC Press Brake Bring About High Benefit

  6. 本文针对大型液压折弯机电控系统存在的问题,提出了对电控系统实施PLC改造的方案。

    This paper proposes a project to rebuild the electrical control system of hydraulic presses machine tool with PLC .

  7. 基于IPC的数控折弯机分布式控制系统

    Study on the Distributed Control System for Press Brake CNC Based on IPC

  8. 公司主要生产数控开槽机、PLC全自动开槽机、数控冲床、数控剪板机、折弯机、校平机等金属板材加工、成型机械。

    The company mainly produces NC Slot Machine , PLC slotting machine , CNC punch , CNC cutting machines , bending machines , School-aircraft sheet metal machining , molding machinery .

  9. 同时,对基于Labwindows/CVI的数控折弯机系统监控软件的体系结构和软件开发环境进行了深入的探讨。

    At the same time , the architecture and software development environment of the monitoring software for the CNC Press Brake System based on Lab Windows / CVI are discussed in detail .

  10. 此外,本文还以亚威机床厂的折弯机机架体为研究对象,使用大型通用化有限元软件ANSYS作为分析工具,进行了有限元分析。

    In addition , ANSYS , which is a kind of general finite element analysis software , has been used as the analysis tool for FEA on the study of bender 's frame .

  11. QS钢管缩径机,“福斯特”WE67K系列数控板料折弯机;

    QS Steel Tube necking machine ," Fox special " WE67K series CNC sheet metal bending machine ;

  12. 本实用新型公开了一种串片式散热片高速折弯机,属于B23类。

    The utility model discloses a high-speed bender for strung radiating fins , which belongs to B23 type .

  13. RG-50小型数控折弯机液压系统存在的问题及其改进

    The Problem and Technical Reconstruction of Hydraulic Systemof RG-50 Small CNC Press Brakes

  14. 针对折弯机数控系统的国内外发展现状,以先进的复杂可编程逻辑器件CPLD为核心,结合PC104模块,构成完整的嵌入式折弯机数控系统。

    According to the development of the CNC bending machine at home and abroad , using advanced CPLD as the core component and combining with PC104 , an integrated and embedded CNC system was built .

  15. 在本文的第三章利用APDL语言对折弯机进行参数化建模,并进行了折弯机的线性静态分析,得出了各个部件的刚度及其强度值,为后续的优化提供依据。

    In the chapter 3 , parametric model are established by using APDL , and linear static analysis is performed , which gets the stiffness and intensity of each component and provides references for subsequent optimization analysis .

  16. 本文以某型号100t折弯机为研究对象,对折弯机进行静态有限元分析,结合实验测试进行模型修正,以此为基础对结构进行优化。

    Taking a 100 ton bender as the object of this study , we make the static finite element analysis . Combining the experimental test for updating the model , the structure is optimized on this basis .

  17. 通过对5000t折弯机全面测试和试运行,上横梁的各项性能指标均能满足设计要求,与虚拟设计的数据基本相符,证明5200t折弯机上横梁的虚拟设计是成功和有效的。

    After the overall tests and commissioning of 5200t Press Brake , every performance parameter reaches the design requirement and basically coincides with the data in the dummy design , which proves the dummy design of the upper beam of 5200t Press Brake is successful and effective .

  18. 5200t折弯机的上横梁是重型折弯机中结构和受力最复杂的大型构件,因结构性缺陷导致构件失效的事例大都发生在上横梁上。

    The upper beam of 5200t Press Brake is a large size component with the most complex structure and receiving the most complex forces on the heavy - duty press brake . Cases of component failures due to structural defects mostly happen on the upper beam .

  19. 电伺服折弯机的同步控制及仿真研究

    Research on Synchronous Control and Simulation of Electric Power Press Brakes

  20. 数控液压板料折弯机GB/T5975-1986钢丝绳用压板

    NC hydraulic press brake Clamping plates for fixing steel wire ropes

  21. 折弯机通用组合上模结构的改进和设计

    Improvement and Design of General Combined Upper Dies Structure for Brake

  22. 新型金属板料折弯机同步系统的精度分析

    Accuracy analysis on a new synchronised system of sheet metal press brake

  23. 折弯机机械补偿装置数值模拟结果分析

    Numerical Simulation Analysis of the Compensation Device in Press Brake

  24. 折弯机压紧机构的选型及设计

    Type Selection and Design for Compaction Mechanism of Bending Machine

  25. 折弯机偏压情况下的同步极限偏差分析研究

    Synchronous Limit Deviation of Press Brake under Eccentric Compression Circumstance

  26. 板料折弯机柔性加载结构研究

    Research on flexible adding load of plates bending machine

  27. 卧式折弯机液压及控制系统开发设计

    Horizontal bending machine hydraulic control system design and development

  28. 我公司是专业从事精密折弯机模具、数控冲模具制造。

    Our company is specialized in precision bending machine dies , NC-die manufacturing .

  29. 板料折弯机调节机构的改进

    The Improvement of Adjusting Mechanism of Sheet Bending Machine

  30. 板料折弯机自动控制技术的发展及实现

    Automatic control technique developed and applied in press brake