机械传动

jī xiè chuán dònɡ
  • mechanical drive;mechanical transportation
机械传动机械传动
  1. 机床工作全部采用电气PLC控制,机械传动,自动化程度高。

    Machine Tools used in all electrical PLC control , mechanical drive , high degree of automation .

  2. 针对机械传动设计的特点,采用基于知识工程的方法构造了机械传动CAD软件的系统结构和设计平台。

    Based on the characteristics of mechanical drive design , the knowledge engineering-based method has been used to build the systematic frame and design platform of CAD software of mechanical drive .

  3. 机械传动零件CAD软件包的研制

    The Development of CAD Software for Mechanical Parts

  4. 基于Visualc++的机械传动综合实验台优化设计研究

    Visual C + + Based Research on Optimal Design of Test System with Multipurpose of Mechanical Transmission

  5. 机械传动系统可靠性MonteCarlo仿真算法

    The Monte Carlo Simulation Method for Reliability Calculation of Mechanical Transmission System

  6. 基于CPLD设计的高速机械传动误差采集模块

    Transmission error sampling module based on CPLD

  7. 论述采用CNC交流伺服驱动控制及高精度机械传动零部件组成的多自由度伺服螺旋传动系统中的主要误差来源。

    The error sources in a high precision screw driver mechanism controlled by a CNCservo system in presented in this paper .

  8. 本文详细介绍了机械传动零件三维CAD软件的特点、功能及开发过程中的关键技术。

    In this thesis , the properties , function and key technology of developing process in three dimensional mechanical transmission parts CAD software are introduced in detail .

  9. SolidWorks环境下机械传动的运动模拟

    Motion Simulation of Mechanical Transmission in SolidWorks

  10. 介绍了BP网络的原理、算法,并用BP网络对采煤机截割部齿轮箱机械传动系统的故障进行了趋势预测。

    The theory and algorithm of BP neural network were introduced , and it was used in the fault trend prediction for cutting part transmission system of mining machine .

  11. 该机通过机械传动,使两个不对称的v型圆柱体内的物料做往复翻动,达到均匀混合之目的。

    The machine through mechanical transmission , the machine makes material in two asymmetry V shape cylinders to turn over to-and-fro . The purpose of uniform can be got .

  12. 介绍了一副自动冲压模,该模具是通过PLC编程控制系统,控制一套集电器、液压、气压和机械传动技术为一体的自动冲压模。

    An automatic punching die is introduced . The mold controls the automatic punching die integrated with a set of electric , hydraulic , barometric and mechanical technologies by PLC programming control system .

  13. 以机械传动系统特征因素做为输入,利用BP网络构成了机械传动方案的决策系统,为传动方案的制定提供了一条新的途径。

    With the input of characterization factors , BP network is employed to construct a decision system for choice of mechanical drive type . It is a new method on choice of mechanical system type .

  14. 以DreamweaverMXVisualStudioNet为开发工具:采用ASP、VBScript、XML等计算机语言技术,可以实现机械传动系统的可视化设计、动态工程文档查询、系统管理等功能。

    Net 、 ASP 、 VBScript and XML . The visual design , query of dynamic documents and system management have been developed in the mechanical drive design system .

  15. 介绍利用Visualc++工具对机械传动综合实验台进行多方案的比较、遴选,并在满足一定约束条件下,获得最优方案,使得设计出的机械传动综合实验台结构紧凑、效率高。

    Some schemes of test system with multipurpose of mechanical transmission were compared and selected in the environment of Visual C + + . The optimal scheme with certain constraint conditions was obtained , with the result that the test system designed has a compact size and high efficiency .

  16. 本文主要介绍了驾驶模拟器的动态系统研究,包括模拟器的机械传动机构设计、液压伺服系统设计和液压伺服系统的控制,同时还介绍了采取的PID控制方法。

    This paper mainly introduces the study of the dynamic system of the steering simulator , including the design of the mechanism structure , the design and control of the servo system of electro-hydraulic , at the same time , it also introduces the control method of PID .

  17. 然而当功率大于300W时,现有的基本LC滤波器电路需要添加笨重的电感。采用基于数字信号处理器DSP的多功能数字深度指示器取代原有粗大笨重的机械传动的牌坊式深度指示器;

    However , the inductor needed to comply with the regulations is quite bulky if the power level is higher than 300W . The multifunction digital depth indicator based on DSP is applied to instead of mechanical instrument .

  18. TS165-2推土机系半刚性悬挂、机械传动、液压操纵、低比压履带推土机。

    TS165-2 bulldozer is semi-rigid suspended , mechanism transmitted , hydraulically controlled and track-type .

  19. 为了解决这一问题,通过分析,提出了建立在微机应用基础上的利用图像的组合装配方法,依据此方法设计了VB环境下的机械传动系统创意组合装配培训系统,并进行相关问题的研究。

    To resolve this problem , an assembled method , using images based on computer applications , is put forward . According to above method , a creative assembled mechanical drive training system based on VB is designed , and correlated studies are carried out .

  20. 论文阐明了流动注射智能分析FIA-Ⅱ仪器对铁元素进行分析测定的化学反应原理,探讨了机械传动部分的设计原理与方法,结合几种FIA的流路系统,通过对比优化了FIA的分析测试条件。

    The author introduces the chemical reaction principle of determining iron using the instrument , discusses the design principle and method of mechanical drive , unites several FIA flow systems , through contrast , improves experimental conditions .

  21. MG-150型锚固钻机是一种机械传动、液压给进、液压提升的动力头式工程钻机。

    The anchor rig MG-150 is a kind of engineering rigs with mechanical top driver , hydraulic feeder and elevator .

  22. 为了实时监测机械传动试验台工作状态信号,采用基于嵌入式以太网控制器8000E的远程监测系统。

    For monitoring the working state signal of mechanical transmission test-bed immediately , adopt the remote monitoring system which bases on embedded Ethernet controller 8000E .

  23. W12系列四辊卷板机采用上辊旋转机械传动,下辊和侧辊升降液压传动,电气集中控制操作系统。

    W12 series rolling machine with four rollers adopt upper roller rotary mechanical drive , lower roller and side roller fluctuation hydraulic drive , electric concentrated control operation system .

  24. 以AVELING自卸车的自动变速器为例,介绍工程机械传动系中广泛采用的液力自动变速器基本的检测、分析与故障诊断方法。

    Taking the auto speed variator of AVELING dumper as an example , the paper introduces the basic check , analysis and fault diagnosis methods which are widely adopted in the hydraulic auto speed variator in engineering mechanical driving system .

  25. 本文分析了JJR-1型教学工业机器人的总体结构,给出了机械传动系统简图与伺服系统的总体原理图,分析了关节伺服控制的原理与工作过程。

    This paper has analysed the overall structure of the teach demonstration robot , has given the overall principle picture of mechanical transmission systematic sketch and servo system ; Have analysed working course and the principle of joint servo control .

  26. 退火窑机械传动设计体会

    Views on designing the mechanical transmission system of the annealing kiln

  27. 零件失效相关时机械传动系统的可靠性计算

    Reliability Calculation of Mechanical Transmission System with Correlative Failure Among Components

  28. 铁路大型养路机械传动轴的磁粉探伤

    Magnetic particle inspection of the driven shafts of railway maintenance machinery

  29. 无机械传动链高效并联机床传动模式的研究

    Research on Transmission Pattern of High-efficiency Parallel Machine without the Transmission-chains

  30. 总体设计中主要阐述了机床机械传动系统的改造。

    The main design tool described the transformation of mechanical transmission .