机械结构

一种简易的机械结构CAD系统

A simple mechanical structure CAD system

基于FEM的机械结构静、动态性能优化设计

Optimum Design of Static and Dynamic Properties of Mechanical Structure Based on FEM

试验期间，机器人算法和机械结构将进行微调，使其更好地适应患病的牲畜，并确保它安全地绕开包括树木、泥浆、沼泽和丘陵在内的潜在危险。

During the trials , the robot algorithms and mechanics will be fine-tuned to make it better suited to ailing livestock and ensure it safely navigates around potential hazards including trees , mud , swamps , and hills .

应用ANSYS软件对机械结构件进行计算机辅助分析

Engineering Analysis of Complicated Structural Component by Using ANSYS

基于CAE技术的机械结构优化方法

A Practical Method for the Optimization of Mechanical Structure Based on the CAE Technology

由于我们提出的所有方法都不使用机械结构，因此有助于实现一个实用的基于集成成像的3D显示系统。

Because all of our proposed methods have non-mechanical structure , they will be helpful to implement a practical 3D display system based on integral imaging .

根据实验需要，本文设计和搭建EPS实验台的总体机械结构。

According to the experimental needs , this paper designs and build mechanical structure of EPS test bench .

以C8051F041DK高速SOC单片机为核心，分别从软件、硬件和机械结构等方面对数字式、多总线油门杆装置进行了设计与研制。

The design develops and researches the digital and multibus throttle lever from the parts of hardware , software and mechanical structure .

基于机械结构的MTMD系统振动控制的研究

The Research of Vibration Control Based on the System of Mechanical Structure and MTMD

详细介绍了一种用于轮胎钢丝圈内周长测量的一套系统，本文主要介绍了基于PLC的钢丝圈内周测长仪的机械结构、测量原理及电控单元的硬件和软件设计。

Details of a steel wire for tire circumference measurement of a circle system , this paper introduces the PLC-based wire circle week length gauge mechanical structure , measuring principle and ECU hardware and software design .

设计了压电加速度计的机械结构，推导了加速度计的X，Y，Z方向的特性方程，给出了三自由度的频响测试结果。

The mechanical structure of piezoelectric accelerometer is designed , and the operation equations on X , Y , and Z axes are deduced , and the test results of three dimensional sensitivities response are given .

同时机械结构设计巧妙、体积小，适用于SOT封装型微小电子元器件的高速自动编带过程。

Its small and skilful machanism is suitable for the mini type SOT-package components taped automatically at a high speed .

本文对VS新型垂直摆倾斜仪的机械结构及其零部件、差动电容测微传感器、仪器的标定、调摆以及倾斜仪的实际应用等作了深入的研究。

This article introduces the VS new vertical pendulum tilt meter 's mechanical construction and its components , the differential capacitance displacement sensor , the calibration , pendulum dialing as well as its practical application .

结合笔者指导的一、二、三届CCTV全国大学生机器人电视大赛无锡职业技术学院代表队的比赛机器人的设计制作，阐述竞赛型机器人的创意设计与基本机械结构。

The text integrates WXIT 's robots'design and making , in which the1st , 2nd and3rd CCTV University Robot Contest are directed by the author , expatiates creative and basic mechanism of contest robots .

本文根据企业需要，结合实际课题，在充分了解和分析缓冲减振重载安全离合器的结构特点与工作原理的基础上，应用MATLAB软件对其进行现代机械结构优化设计。

Base on the fully understanding and analysis of structural characteristics and working principle of security clutch , this paper according to the need of corporation and combine actual topic , using MATLAB software to carry on the modern optimization design for security clutch .

采用VVVF技术对电梯开门机直接拖动，使电梯门机装置机械结构简化，关闭时噪声低，且可靠到位。

By use of VVVF technology to directly control elevator door operation simplified the mechanical structure of elevator door device with low noise in door closing and leveling in exact position .

多头拼接扫描的机械结构，对扫描精度的影响很大，而高精度的多CCD头拼接调校又是一件非常繁琐的工作，不但周期长，效率低，而且精度的一致性难以得证。

Multi-CCD splice scanning mechanical structure have a great impact on the scanning accuracy . but the high-precision multi-CCD adjust is a very tedious work , not only a long cycle , low efficiency , and accuracy of the consistency of hard to get permits .

机械结构对称破缺知识应用平台（KAPMSS）的开发。

Development of Knowledge Application Platform of Mechanical Symmetry-Breaking ( KAPMSS ) .

工作模态分析（OMA）法无需外加激励，仅依靠机械结构工作状态下的振动响应信号提取结构模态参数。

Operational modal analysis ( OMA ) is without additional excitation . This is only relied on the state response signal to extract structure modal parameters of the mechanical structure and more close to actual situation .

该控制系统灵活运用PSoC片上系统内部集成的PWM模块、计数模块和定时模块等来完成机器人的运动控制，通过运用红外传感电路和机械结构相结合的方法来检测外部环境信息。

Several modules integrated in PSoC , such as PWM , counter and timer modules , are used to control the robot 's motion . The environment information can be sensed by infrared sensors with the help of the robot 's bumper .

简要介绍SJY型影象式烧结点试验仪的原理、用途，并分析其原有缺点，着重在电气控制线路、机械结构等方面作了改进，以提高控制精度，方便安装调整。

Principle and applications of Model SJY projection type sintering point tester are presented briefly , its shortcomings analyzed , and improvement on control circuit , mechanical construction ect suggested to increase control precision and for convenience of installation and adjustment .

工程机械结构现代强度设计方法的研究

Research in the modern strength design method for con-struction machine structures

基于正交性条件识别机械结构结合面参数方法的改进

Improvement on Identifying the Machanical Structural Joint Parameters with Orthogonality Relation

基于随机模糊法的机械结构状态评价及应用

Condition Assessment and Application for Mechanical Structure Based on Stochastic-fuzzy Method

空间极坐标测量系统的机械结构设计与不确定度分析

Mechanical Structure Design and Uncertainty Analysing of Spatial Polar-coordinate Measuring System

机械结构动特性的灵敏度分析与修改

The Sensitivity Analysis and Modification of Dynamic Behavior of Mechanical Structures

一种机械结构结合面动力学参数识别方法

A method of identifying dynamical parameters of mechanical structural joints

基于知识的工程机械结构分析模型化方法

Knowledge-based modeling method for the structural analysis of construction machines

机械结构用无铅易切削钢的发展

Development of Free Cutting Steel for Machine Structure without Lead

本文介绍了汽车主减试验台的机械结构设计及电气系统设计。

This article introduced the mechanism design and the Electrical system design .