平行光管

完成了光应力源及平行光管的设计；

Completed the light stress source and some designs for collimator ;

工业测量中平行光管定向法的试验研究

Experimental research of collimator method for directing in Industrial Surveying

测量仪采用多组平行光管和高速线阵CCD相结合进行测量和数据采集，以保证测量仪的大范围连续动态测量。

For the assuring of dynamic continual measuring in large , the method of combining multi-group collimators with high speed linear CCD is used to measure and data collect .

并实时采集两台自准直平行光管内的CCD的视频信号，进行图像处理，判读出两维变形量，实现实时动态变形测量。

Meanwhile it can real-time collect video signal of CCD fixed in two self-straight parallel light-tube and process video , estimates distortion of two-dimension to realize real-time dynamic distortion measure .

我们利用CCD扫描位于被测照相物镜前面的平行光管焦平面上的狭缝像，采样数据通过A/D变换后输入计算机，把这些数据进行快速傅立叶变换即可求出被测照相物镜的OTF值；

We measured the OTF of a photographic lens by digital Fourier Transform , using a CCD to scan the slit image in the focal plane of the collimator in front of the measured lens .

接着设计了平行光管和鉴别率检测物镜的光学结构，并且分别检测了它们的检测精度，按设计需求选取了CCD、显微物镜、电动（手动）六维台等器件。

Next , the collimator and the optical configuration of detectability detection objective were designed , and the precision was detected respectively . The components of CCD , micro objective , six-dimensional sets of motor-driven ( manual operation ) were selected according to the design requirement .

本文重点介绍JC-1型精密测角仪的动态光电自准直定位平行光管光学系统，为了满足测角仪对多谱线高精度测量的要求，应采用的结构形式及象差校正方案。

This paper described an optical system with dynamic photoelectric autocollimator for location of JC-1 precision goniometer . In order to meet the demand of high accuracy angle measuring of multi-spectral lines , the optical system structure and the aberration correcting method are discussed as well .

大口径长焦距平行光管光学系统设计

Optic Design of Collimator with Large Aperture and Long Focal Length

一种新型多波段大口径平行光管的设计

Design of a new kind of multi-waveband large aperture parallel light pipe

平行光管是光学实验及计量检测的重要设备。

The collimator is an important equipment for optical experiment and standardization .

用五棱镜法调校平行光管原理的探讨

Discussing The Principle of Adjust Collimator With Penta Prism Method

大口径反射镜在平行光管中的安装方法

The Installation Methods of Large Reflection Mirror in Collimator

GB/T7962.2-1987无色光学玻璃测试方法光学均匀性平行光管测试方法

Colourless optical glass test methods & Test method by collimator for optical homogeneity

大口径、长焦距平行光管装调技术研究大口径长焦距反射式偏瞳平行光管光学设计

Optical Design of the Reflective Eccentric-pupil Collimator with Large-aperture and Long Focal Length

大口径平行光管在多光轴探测器光轴平行性测量中的应用

Application of Large-Aperture Collimator in Optical Axis Parallelism Measurement

波差法设计长焦距复消色平行光管物镜

Long Focus Collimator Lens Design of The Three Color Achromats With Wave Disparity Method

论述了一种作为红外目标源的离轴抛物面反射式平行光管系统的组成。

A kind of off-axis parabolic collimator acted as infrared target source was introduced .

平行光管是最基本的校验仪器。

Collimator is the most basic calibrating instrument .

大口径长焦距平行光管主反射镜支撑与调整机构的研究

Supporting and adjusting for collimator primary mirror with large-aperture and long - focal length

校准平行光管的新方法及其原理

The new method and principle of calibrating collimator

平行光管内凸透镜焦距的测量方法

A Measuring Method of Convex Foci in Collimator

平行光管的基本原理及使用方法

Basic principles and use method of collimator

离轴抛物面反射式平行光管的结构设计

Structure design of the off-axis parabolic collimator

Φ300非球面激光平行光管的研制

Manufacture of Φ 300 aspheric laser collimator

介绍一种测量平行光管内凸透镜焦距的测量方法。

In this paper , a measuring method of convex lens foci in collimator is given .

为卡塞格林结构式平行光管的研究、设计提供了必要的依据。

All of those provide necessary basis for the research and design of Cassegrain structure col limator .

自准直仪（又称自准直测微平行光管）是应用自准直原理测量微小角度的检测仪器。

Auto-collimator is a measuring and testing instrument which utilizes the principle of auto-collimation to measure small angle .

对常规结构式平行光管和卡塞格林结构式平行光管的衍射分辨率进行了对比分析。

Compared with the conventional collimator , the diffracted resolution of Cassegrain structural collimator is analyzed in this paper .

基于三级像差理论，得出了采用非球面单透镜的平行光管的光学设计初始参数。

Based on the third-order aberration theory , the pre-design parameters of the objective lens with aspheric surface were given .

光电自准直仪是小角度测量仪器，是为平行光管校验提供的重要测量仪器。

The photoelectric autocollimator is small angle measuring instrument , provide effective method on checking reticle-offset of parallel light pipe .