首页 / 词典 / good

少内

少内少内
  1. 多层大开间少内纵墙住宅结构考虑塑性内力重分配的设计方法

    A Design Method Considering Plastic Stress Redistribution in Multistory Large Bay Residential Structures with Fewer internal Longitudinal Walls

  2. 少内纵墙大开间剪力墙结构高层建筑模型纵向拟动力试验研究

    Longitudinal Direction Pseudo Dynamical Test Research on a Shear Wall Structure Model with Big Bay and Less Longitudinal Walls

  3. 少内纵墙、多层大空间钢筋混凝土剪力墙结构体系地震模拟试验研究

    Earthquake Simulation Test of a Multistory RC Shear Wall Structure with Fewer Internal Longitudinal Walls and Larger Spaces in Lower Stories

  4. 多层大开间少内纵墙灵活住宅结构体系是在外砖内模大模板体系的基础上,扩大开间,减少内纵墙,使开间和进深两个方向都有灵活性,实现建筑平面的多样化。

    A structural system called multi-story RC-masonry mixed structure used for residential building with fewer internal longitudinal walls possesses many advantages , especially its flexibility in architectural layout of the building .

  5. 本文在文献〔1〕的基础上,对多层大开间少内纵墙住宅结构模型试验结果作了进一步分析。

    Abstract Based on the experimental study of a six-story structure model , an elastic design method of multi-story large bay residential structures with fewer internal longitudinal walls was suggested in references [ 1 ] and [ 3 ] .

  6. 核内移肌纤维占总肌纤维百分率:正常组肌纤维少核内移(1.2%);

    Percentage of nuclear ingression muscle fiber in total muscle fiber : Nuclear ingression of muscle fiber was few in normal group ( 1.2 % ), but it was abundant in control group ( 75 % ) .

  7. 确定少齿差内齿轮副变位系数的切线法一个比Newton法收敛快而稳的两点切线法

    Newton Method for Determining the Addendum Modification Coefficient of Internal Gear Pair with Small Difference in Number of Teeth

  8. 结论和Q波型心肌梗死相比,无Q波型心肌梗死组并发症少,院内死亡率低,近期预后较好。

    Conclusion The group of NQMI have fewer complications , a lower hospital mortality rate and a better prognosis in the first six months than the group of QMI .

  9. 多数患者术前24h尿量偏少,膀胱内压、中心静脉压、动脉收缩压和PaO2表现异常,手术患者术后各项指标较术前明显好转(P0.01)。

    Most of patients were oliguric , with abnormal bladder pressure , central venous pressure , and systolic blood pressure 24 hours before operation . But these parameters were significantly improved after operation ( P0.01 ) .

  10. 用插齿刀加工的少齿差内啮合变位系数的确定

    The modification coefficient ensurance of few teeth difference internal gear pair cutting with cutter

  11. 渐开线少齿差内齿轮副

    Involute internal gear pair with small teeth difference

  12. 少齿差内啮合齿轮的计算机辅助几何设计及参数优化

    Computer-Aided Geometric Design and Parameters ' Optimization of Internal Gear Pairs with Small Teeth Difference

  13. 少齿差内啮合齿轮轮齿接触问题研究齿轮啮合内部动态激励数值模拟

    Study on Teeth Contact Problem of Inner Gearing in Small Teeth Number Difference Planetary Gear Drive

  14. 现代社会强调的是:人与人的交流旨在用越来越少的时间内传递越来越多的信息。

    Modern society is insisting that channels of human communication convey an ever-increasing mass of information to its destination within an ever-decreasing period of time .

  15. 能有效激励成员,建设团队,能良好的协调部门内及各部门的关系。我能自我激励,独当一面在尽可能少的时间内高效率地做好工作。

    Ability to motivate others and team building . I am self-motivated and can work independently to get the job done efficiently in the least possible time .

  16. 上课的目的是在尽可能少的时间内,向学生灌输尽可能多的知识,完全是为入学考试做准备。

    The point of class is to cram as much information into the students in as little time as possible , all in preparation for entrance exams .

  17. 经过试验证明:该型烘干炉结构简单,维修方便,耗电少,炉内温度均匀性较好,烘干质量良好。

    The application result showed that this oven was characterized by simple structure , easy maintenance , less power consumption , good temperature homogeneity and high drying quality .

  18. 结论中空长加压螺钉系闭合穿钉内固定,手术创伤少,且内固定牢靠,稳定型骨折及年老体弱者应首选此术式。

    Conclusion Hollow long pressurizing screw is propitious to be used in patients with stable fracture or elderly , debilitated patients because of its solidity and fewer operative trauma .

  19. 与有毛黄瓜相比,无毛黄瓜光合机构的结构较简单,叶肉细胞内叶绿体数量少,叶绿体内基粒数和基粒片层数少。

    Compared with that of normal cucumber , the structure of photosynthetic apparatus in glabrous cucumber was simple with less numbers of chloroplast and grana as well as the grana lamellae .

  20. 渐开线少齿差内啮合同时接触齿数研究及实际重合度的一种计算方法

    An Investigation into the Number of Contact-teeth for a Pair of Involute Internal Meshing Gears with Small Difference between their Teeth Number and One Calculating Method for the Virtual Contact Ratio

  21. 本文以有限元弹性接触分析理论为基础,提出了一种对少齿差内齿轮副啮合过程中齿间载荷分配、齿面载荷分布的分析计算方法;

    This paper is based on FEM elastic contact theory , a analysis computing method is proposed on internal gearing with small teeth difference to describe the teeth load sharing and tooth surface load distribution .

  22. 我能自我激励,独当一面在尽可能少的时间内高效率地做好工作。内在报酬、利他主义才会对知识共享产生持久的激励作用;

    I am self-motivated and can work independently to get the job done efficiently in the least possible time . ( 2 ) Intrinsic reward and altruism will make individuals share knowledge in high frequency .

  23. 在少齿差内啮合传动中,存在多对接近啮合的小间隙齿面于理论啮合点左右,轮齿受力产生的微小变形使得某些对齿面相互接触进入啮合状态。

    In small tooth difference of inner meshed transmission , there were a few pairs of tooth faces which were apart from each other for a small gap beside the contact point generated by two meshed teeth .

  24. 应用具体实例,研究了加工误差对少齿差内啮合齿廓重迭干涉的影响,并提出相应的解决方法。

    The affect of machining error on the mesh inside of small tooth number difference of the tooth outline overlap interference is studied in this paper , with the application of practical examples , and the corresponding solving methods are given .

  25. 本文对《少齿差内啮合齿轮变位系数的计算》一文所提出的联立求解法和对微分逼近法的改进提出了异议。

    An objection is raised in the paper to the simultaneous solution and the supplement of the differential iteration which are brought forth in the article " Calculation of Addendum Modification of Internal Gear Pair with Minor Difference in Tooth Number " .

  26. 本文给出了少齿差内齿行星轮行星传动的主要限制条件、选择太阳轮变位系数的原则及几何参数的计算公式。

    In this paper , the main restrictive condition , the principle on the selection of the modification coefficients in the small number tooth difference internal planetary gear drive were discussed , and the calculating formulations of the geometric parameters in this drive was given .

  27. 结果表明:0℃低温贮藏效果最好,呼吸作用低,重量和Vc损失少,15天内可保持新鲜、脆嫩;

    The results showed : The respiratory metabolism , the loss of Vc and weight of Alfalfa were lower at 0 ℃, which could keep Alfalfa fresh and tender in 15 days after harvest .

  28. 少齿数差内啮合齿轮的强度计算

    Strength calculation for internal meshed gear with few tooth number difference

  29. 自由市场经济在国家尽可能少干预的框架内运行。

    A free market economy operates within a framework of minimal state intervention .

  30. 最适合在自助餐区、咖啡厅以及少用量的餐馆内使用;

    Perfect for self-serve buffet areas , lighter volume restaurants , diners , and cafes ;