套筒扳手

tào tǒnɡ bān shou
  • socket wrench;box spanner
套筒扳手套筒扳手
  1. 扳手按照结构的不同主要可以分为两大类,即手动螺丝扳手和套筒扳手。

    The spanner is different , according to the structure may divide into two big kinds , namely manual screw spanner and box spanner .

  2. 如果XSLY是一个套筒扳手,那么命令式语言就是锤子。

    If XSLT is a socket wrench , imperative languages are hammers .

  3. 套筒扳手套头应用来避免造成轮辋损坏。

    Socket-wrench insert should be used to avoid damaging the rims .

  4. 双头套筒扳手模具设计

    Design of the Die for Both - Ended Circular Wrenches

  5. 活柄六角固定套筒扳手

    Gramme activity pipe reciprocator free lever hexagonal fixed socket wrench

  6. 采用套筒扳手来拆卸调节阀阀座进行更换。

    Use socket wrench to remove regulator seat for replacement .

  7. 将套筒扳手转动约180度并留在该处。

    Turn the socket wrench through approx.180o and leave it in position .

  8. 使用专用工具套筒扳手紧固塑料盖。

    Tighten plastic cap using special tool socket wrench .

  9. 现在设想一下使用一个套筒扳手。

    Now consider being given a socket wrench .

  10. 用规定的专用工具套筒扳手头,以免损坏轮辋。

    Use the prescribed special tool socket wrench insert to avoid damaging the rims .

  11. 形管(俗名遮柄曲)形似曲柄头(有一个鹤头把手)和套筒扳手头的扳手。

    A wrench shaped like a brace ( has a crank-shaped handle ) and a socket head .

  12. 成功使用套筒扳手的关键在于模式匹配:套筒扳手必须与螺母相匹配。

    The key to success with a socket wrench is pattern matching : The socket must match the nut .

  13. 那么,放下锤子和螺丝刀,将套筒扳手放到螺母上拧动。

    So , put down the hammer and screwdriver , and place the socket over the nut and turn .

  14. 如果匹配,那么用套筒扳手来拧开一个螺母肯定比用锤子方便。

    When it does , a socket wrench is much more effective at loosening a nut from a bolt than a hammer .

  15. 六角套筒扳手与液压活塞、活塞套与支撑板是用销轴铰链一起。

    The hexagonal socket wrench is hinged with the hydraulic piston , the piston sheath and the support plate by a pin roll .

  16. 我们可以将抗体制成转接分子,接在病毒的手臂上,就像套筒扳手的套筒一样,来扭转这种情况。

    We can reverse this pattern using specially generated adapter molecules made of antibodies that snap onto the arms of the virus like sockets on a socket wrench .

  17. 支撑板与套筒扳手筒的环形槽旋转配合连在一起,以六角套筒为中心构成一个可转动的三角架。

    The support plate rotarily matches the annular groove of the socket wrench barrel , and a rotatable tripod with the hexagonal sleeve barrel as a center is formed .

  18. 双头套筒扳手模具设计可变六角套筒扳手则是对手动螺丝扳手和六角套筒扳手的综合。

    Design of the Die for Both - Ended Circular Wrenches The variable hexagonal box spanner is the synthesis of the manual screw spanner and the hexagonal box spanner .

  19. 否则,您可能感觉到像用锤子一样使用一个套筒扳手来敲击螺丝刀手柄而拧开螺栓的螺母。

    Otherwise , you might feel as if you are using a socket wrench as a hammer hitting the handle of a screw driver to loosen a nut and bolt .

  20. 煤矿井下可回收锚杆一般用于煤层巷道,由于锚杆钻孔的变形和塌孔等原因,用普通套筒扳手拆卸锚杆时,因不能给锚杆提供轴向拉力,很难将锚杆拆卸拔出。

    It is difficult to pull out the bolt with ordinary socket wrench that can not provide axial tension because of the bolt drilling hole deformation and the collapse of holes .

  21. 用一个开口套筒套筒扳手套头或类似工具来执行此操作。

    Use an open socket socket-wrench insert or similar tool to do this .