大批量生产

  • 网络mass production;mass-production;mass-produce;massproduction
大批量生产大批量生产
  1. Fix-1符合生产要求,可大批量生产。

    Fix-1 is up to the production demands and can be put into mass production .

  2. 精益生产方式起源于日本丰田生产系统(ToyotaProductionSystem,TPS),是从思维和方法上彻底颠覆传统大批量生产方式的复杂生产运营体系。

    Lean production , originated from Japan Toyota Production System , is a complex production operation system completely different from the traditional way of mass production from minds to method .

  3. 麦克风上的一个塑料圈,材料采用聚丙烯(PP),需要大批量生产。

    A plastic circle of a microphone that is made of polypropylene needs to produce a great deal .

  4. RH真空精炼是大批量生产优质纯净钢的重要手段。

    RH vacuum refining technology is a powerful method of producing clean steel .

  5. 该模具采用漏斗式半自动送料装置,用于弯制各种V形、U形和弓形工件,适合大批量生产。

    The die , with the hopper-type automatic feeding device , is used for bending various V-shaped , U-shaped and bow-shaped parts and suitable for mass serial production .

  6. 精益生产,是以汽车工业这一开创大批量生产方式和精益生产方式JIT的典型工业为例,经理论化后总结出来的。

    LEAN manufacturing is based on auto industry which created MASS production & JIT production and concluded in the methodology .

  7. CCD制造需要专门的工厂、设备及工艺,这给以低成本大批量生产汽车摄像头带来了困难。

    Most notably , CCD manufacturing requires specialized foundries , equipment , and processes , which prevents them from meeting the low-cost , high-volume production requirements for automotive cameras .

  8. 通过对聚脂网生产工艺CAPP系统应用表明,该算法不仅适用单件小批量生产,而且适用于大批量生产,具有较好的推广性。

    By using in polyester network production technology CAPP system , this algorithm is not only applicable small batches production , but also effective for large quantity production .

  9. 提高电机钢板壳的纵缝焊接质量和大批量生产的生产效率,关键是提高TIG焊机电弧引燃的成功率。

    To raise the longitudinal welding quality and productivity , it is the key to raise the successful rate of arc starting for TIG welding .

  10. 本文概要地介绍了准时化(JIT)生产方式的产生、特点,以及准时化生产方式与传统的大批量生产方式的比较。

    This article introduces the origin and characteristic of Just in Time ( JIT ) production system and the comparison between JIT production and Mass production .

  11. SAW传感器具有灵敏度高、在大批量生产时成本低、功耗低、稳定和轻巧等特点,并且经过改进后很容易实现对多种物理、化学和生物量的传感。

    SAW sensors have the advantages of high sensitivity , low cost when produced in large volume , low power consumption , ruggedness and lightness . They also have the potential of sensing various physical , chemical and biochemical measurands .

  12. 满足低价位的大批量生产(也是低安全性)的电子移动消费产品制造商的需要,对MEMS供应商来说是一个完全不同的挑战。

    Meeting the low price demands of mass production ( yet low safety ) manufacturers of electronic mobile consumer products at a high volume is a very different challenge for MEMS suppliers .

  13. 类似的,当大批量生产成为19世纪的大潮之时,威廉•莫里斯(WilliamMorris)和约翰•拉斯金(JohnRuskin)等英国辩论家希望将这股浪潮推回去。

    Similarly , when mass production became a spring tide in the 19th century , British polemicists such as William Morris and John Ruskin were there to wave it back .

  14. RH作为炼钢与连铸之间的重要精炼设备之一,能很大程度上提高钢水质量,满足大批量生产高附加值产品的要求。

    As one of the important refining equipments between steelmaking and continuous casting , RH can improve steel quality largely and meet the demand of mass production of high additional value .

  15. 从订单入手,提出订单重组的概念,建立起MC订单重组模型,并对重组算法进行研究。对个性化的客户订单进行重组,得到适合大批量生产的批量订单。

    The concept of order recombining was defined , the MC order recombining model was set up , and the related arithmetic was studied , and the individual orders was recombined to batch orders to fit mass production .

  16. 研制出的SIMOX高温压力传感器具有结构简单、与半导体工艺兼容、适用于大批量生产等特点。

    The SIMOX high temperature pressure transducer is provided with the follow good characteristics : sample structure , compatible with semiconductor process , fit to mass producing .

  17. 讨论企业MTM生产方式中裁剪工序所造成的人工消耗和面料损耗及其影响因素,并讨论与大批量生产方式之间的差别。

    This paper discussed labor loss and material loss caused by cutting process based on MTM method in enterprises and the differences between mass production and MTM manufacture mode .

  18. 这验证了采用MEMS技术研制的双桥结构的气体流速传感器的工艺方案可行性,该项技术具有集成化和大批量生产的特点,有进一步应用的价值。

    It is proved the feasibility of the flow sensor with the structure of micro cantilever bridge by using the MEMS technology . The integration and bulk production can be realized with the method that is applied to the field of micro gas flow sensor especially .

  19. 针对长径比大于5,直径4-20mm圆柱孔零件大批量生产的精加工要求,电镀CBN珩具相比精密镗孔、研磨和珩磨具有优势。

    According to the finishing requirement of length-diameter ratio greater than5and4 ~ 20mm in diameter cylindrical hole parts with the mass production of the type , compared with fine boring , lapping , honing , electroplating CBN honing tools was overriding .

  20. 动力调谐陀螺仪(简称DTG)是惯性导航系统中应用最广泛的陀螺之一,其具有结构简单、成本低廉加工装配较容易,适合大批量生产等优势。

    Dynamically tuned gyroscope ( DTG ) is one of the most widely used gyros in inertial navigation systems , and it is suitable for mass production , due to its simple structure , low cost and easy processing and assembly .

  21. DISA造型线具有生产效率高、铸件质量好等优点,在小型铸件大批量生产上具有不可替代的优势,但是其铸造工艺和模具寿命一直是影响生产厂家的突出问题。

    The DISA casting line has many merits such as high production efficiency , good casting quality etc. It is irreplaceable for applying to mass production on small casting . The casting process and mold service life are conspicuous problems which always perplex the manufacture factories .

  22. 面向大批量生产的汽车制造企业供应链绩效评价

    Performance Evaluation for High-Volume Production Automobile Manufacturing Enterprises ' Supply Chain

  23. 最先进的大批量生产方式,可大幅度降低采购成本;

    Available for mass production , can help to reduce cost ;

  24. 这种计划策略尤其适合大批量生产;

    This planning strategy is particularly useful in mass production environments ;

  25. 设计有销路的服装。大批量生产这些服装。

    The design of saleable garments . Producing these garments in bulk .

  26. 适合专业的马达生产企业大批量生产使用。

    Suitable for professional motor manufacturing enterprise of mass production .

  27. 和工厂一起跟进订单从打样到大批量生产的全过程。

    Handle orders processing from development to bulk production together with factories .

  28. 像汽车这样的日用品是针对大批量生产而设计的。

    Commodities such as automobiles are engineered for mass production .

  29. 最后,总结了大批量生产方式的历史作用。

    It finally gives a summary of MP in history .

  30. 家具产业也面临从传统的大批量生产模式,转向小批量多品种生产模式。

    Furniture industry also be faced with produce patterns from mass production .