增塑

结果表明，乙酰柠檬酸三正丁酯（ATBC）增塑效率高，卫生性好，是PVC医用料的优良增塑剂。

It has been demonstrated by the experimental results that ATBC with high plastifying efficiency and good hygienic properties is a fine plasticizer for medical grade PVC .

探讨了不同类型的SBS，SBS／CPE比例、CPE含氯量、增粘剂和增塑剂的含量等因素对粘接性能的影响。

The influences of the kinds of SBS , CPE / SBS proportion , the content of chloride in CPE , the quantity of hyperadhesion agent and plastifying agent on adhesivity were discussed .

结果表明，PC与阳离子之间存在较强的络合作用，PC对基体聚合物有很强的增塑作用。

Results showed that there were great complexing actions between PC and cations .

添加润滑剂及增塑剂对R－PVC注塑料性能的影响

Effect of Lubricant and Plasticizer on the Properties of R-PVC Injection Material

增塑剂对PVC电缆料电性能的影响

Influences of plasticizers on the electrical properties of PVC cable materials

纳米粒子Al2O3催化剂在制备n-DOP增塑剂反应中的催化活性

Activity of nanometer particle Al 2O 3 catalyst in preparation of n DOP

增塑剂与PVC糊凝胶化性能关系的研究

Study on the relations between plasticizer and gelation behavior of PVC plastisol

半补强炭黑对增塑PVC的紫外光稳定性的影响

Effects of semi-reinforcing furnace black on the UV stability of plasticized PVC

PVC增塑糊黏度及其稳定性正交实验研究

Study of Viscosity and Stability of PVC Plastisol by Orthogonal Experimental Design

硝酸酯增塑聚醚推进剂中PB类助剂的作用机理

Mechanism of PB aids added in nitrate plasticized propellants

高相对分子质量PE的增塑熔融纺丝Ⅱ.拉伸工艺和纤维的结构性能

Plasticized melt spinning of HMWPE ⅱ . drawing process and structure and properties of fibre

ACR/PαMS复合体系对非增塑PVC加工性能改进的研究

Study on the Processability of Unplasticized PVC Compounding with ACR / P α MS Mixture

研究了增塑剂/粘接剂之比（R）对流延浆料的性能的影响。

The ratio of binder to plasticizer ( R ) which would influence the rheology of slurry was studied .

采用聚合度为1300的PVC树脂为基体树脂，与高分子改性剂、增塑剂、填充剂等共混研制了软质PVC密封条的粒料。

By blending the PVC of polymerization degree 1300 with polymeric modifier and plasticizer , etc.

树脂复配对PVC增塑糊黏度及稳定性的影响

Effect of Compounding of PVC Paste Resins on Viscosity and Stability of Corresponding PVC Plastisols

低聚体的存在增加纤维的吸水量，这种增塑作用使聚酰胺-6纤维的Tg和再结晶温度大大下降。

T g and recrystallization temperature of Nylon-6 fibre are greatly reduced by the plasticizing effect of oligomer and water .

结果表明，增塑比和AN含量越低，GAP／AN推进剂的燃速越高，压强指数越低。

Lowered the plasticizing ratio and AN content , the higher burning rate and lower burning rate pressure exponent were achieved .

F2型增塑剂的研制

Preparation of Plasticiser F_2

采用凝胶渗透色谱法确定PVC中增塑剂的种类及含量

The determination of kinds and contents of phthalate plasticizers in PVC samples by gel permeation chromatography

并对该PU增塑剂的类型、性质和特点及典型应用进行了简要陈述。

The types , characteristics and representative application of polyurethane plasticizer were introduced .

研究了复合酯润滑剂对透明未增塑聚氯乙烯（u－PVC）热稳定作用的影响。

The effects of the composite-ester lubricant on the thermal stability of transparent unplasticized PVC were studied .

增塑剂含量在40phr时，软质PVC体系有较好的力学性能。

When the content of plasticizer reached 40 phr , the soft PVC materials had good performance .

采用高相对分子质量的增塑剂与低相对分子质量的增塑剂混合增塑ST和PVA，有利于提高薄膜的力学性能。

Mechanical properties of blend films were enhanced by adding large and small plasticizers simultaneously .

沉淀分离&HPLC法测定PVC塑料中的DOP增塑剂

Determination of DOP plasticiser in PVC plastics by precipitation separation & hplc

低分子量不饱和聚酯增塑EPDM磺酸锌盐机理的研究

Plasticization mechanism of low molecular weight unsaturated polyester for zinc-neutralized sulfonated EPDM

研究了不同填充剂、增塑剂对PVC轻型输送带覆盖胶性能的影响。

Effects of different fillers , different plasticizers on the cover properties of light PVC conveyor belts were studied .

增塑剂对EPDM绝热层材料性能的影响

Effect of Plasticizer on Properties of EPDM Insulator Material

HTPB/增塑剂共混物玻璃化转变温度的MD模拟

Molecular dynamics simulation on the glass transition temperatures of HTPB / plasticizer blends

所得BD增塑剂质量稳定、耐污性能优良、用BD增塑剂增塑的PVC制品性能良好。

The plasticizer is stable in quality , good in pollution - free .

通过增塑剂，SBS的加入进行复合改性，进一步提高了材料的综合性能。

Compound modification by adding plasticizer and SBS can improve overall properties of the final products .