固化

gù huà
  • welding;solidify;consolidation
固化固化
固化[gù huà]
  1. 故4~CNTs/BMI/BA体系采取与BMI/BA相同的固化工艺进行固化。

    4 # CNTs / BMI / BA system have same solidify technics with BMI / BA .

  2. 方法通过蛋白交联固化及N羟基琥珀酰亚胺基3(2吡基二硫)丙酸脂(SPDP)交联的方法制备蛋白免疫微球。

    Methods Immuno-nanospheres were prepared by methods of protein cross-linking solidify and SPDP cross-linking .

  3. 制造推进剂的最后操作是粘合剂的固化。

    The final operation in propellant manufacture is the curing of the binder .

  4. 在这个工段,组装脱水固化的极板并通过极板耳连在一起

    In this department , hydro-set plates are assembled and joined together at the plate lugs .

  5. 一种用云母氧化铁颜料配制而成的双组份聚酰胺固化环氧涂料

    It 's a two-component , polyamide cured epoxy paint , pigmented with micaceous iron oxide ( MIO ) .

  6. 同时将产物用于UV固化油墨配方,性能理想。

    A congestion cured inks made with the product has perfect characteristic .

  7. UV固化磷腈阻燃单体的合成与表征

    Synthesis and Characterization of UV-Curable Monomer with Phosphazene Flame Retardant

  8. 同时发现PAN固化层厚度的平方和时间呈良好的线性关系。

    The square of gel thickness was linear with coagulation time .

  9. UV光固化环氧丙烯酸酯耐磨涂料的研究

    Study on UV Curing epoxy acrylate Abrasion Resistant Coatings

  10. 制备了含有品红颜料的喷墨印花用聚氨酯丙烯酸酯油墨的UV固化油墨为。

    UV ink , containing magenta pigment in ink-jet printing , was prepared .

  11. 高活性UV固化树脂的研究

    Study on the High Reactive UV Cured Resin

  12. UV固化涂料在石材上的应用

    Application of UV-curable Coatings on Stone Substrate

  13. 非等温DSC研究聚苯并口恶嗪/炭纤维复合材料的固化动力学

    Study on cure kinetics of benzoxazine / cf composites by non - isothermal DSC

  14. UV固化绿色油墨

    UV Curable Green Ink

  15. UV辐射固化胶粘剂综述

    Review of UV-Curing Adhesives

  16. 全固化可调谐Yb∶YAG激光器

    All-solid-state Tunable Yb ∶ YAG Laser

  17. 红锥木材性质与UF胶固化时间关系的研究

    Studies on the Relationship between Castanopsis hystrix Wood Properties and Curing Time of UF

  18. 利用MSW飞灰作为新型固化基质的研究

    The Research of the New type S / S Material by utilizing MSW Fly Ash

  19. 硅氢加成型室温固化硅橡胶胶粘剂的研究聚二甲基硅氧烷结构的~1HNMR研究和硅氢、硅羟基含量的测定

    Study of structure of polydimethylsiloxanes and determination of hydrogen and hydroxyl bonded to silicone by Fourier transform ~ 1h NMR

  20. 影响VRLA蓄电池用胶粘剂固化效果的若干因素

    Several factors influencing the curing-effect of adhesive for VRLA batteries

  21. VE改性BMI树脂的固化活性较高,最高固化温度可降低到180℃。

    VE modified BMI resin was more reactive and thus its maximum cure temperature was decreased to180 ℃ .

  22. 在pH值相近的情况下,木粉与胶的混合物固化时间随木材缓冲性能的增加而缩短;

    Under the condition of having similar pH value , gel-time of mixture of UF resin with wood flour decreased as buffer capacity of the wood flour increased ;

  23. 用热重法(TG)分析了紫外光辐射固化漆膜在空气气氛下热失重的过程。

    The thermal degradation process of the Varnish film cured by UV radiation was analyzed with TG method in air atmosphere .

  24. 结果表明在电子束辅助固化工艺条件下,浸入木材的St、St/UPE和St/EA的聚合率以及St/UPE和St/EA的固化率均可大于90%。

    The results showed that the curing degree of the impregnated resins could be greater than 90 % with the aid of electron irradiation .

  25. 首先研究了胶原纤维固化黑荆树单宁、固化落叶松单宁和固化杨梅单宁对Cd(II)的吸附特性。

    At first , the adsorption behaviors of Cd ( II ) on collagen fiber immobilized black wattle tannin , larch tannin and bayberry tannin were investigated .

  26. 用FT-IR和DSC技术检测了树脂的固化反应;最后对树脂的性能进行了表征。

    The curing reaction of the resin was investigated by using FT-IR and DSC technique and the characteristics were described .

  27. NDV联合热固化瘤苗的抗肿瘤作用

    Anti tumor Role of Combination of NDV and Thermic Solidified Tumor Vaccine in Rats

  28. 由于硬件系统及驱动程序完全自主设计,为对系统进行二次开发和扩充、采用DSP专用数字处理芯片固化压缩算法及智能监控算法提供了余裕;

    Because the hardware and the driver are designed independently , there is much margin to reexpand the system , fixing the compression algorithm and intelligent monitor algorithm in DSPs .

  29. 使用者根据自己的要求,在固化EPROM时,将要求发生的信号以表格形式写入。

    Users write the desired signal in the form of table when pro-gramming EPROM .

  30. 常温固化TiB2阴极涂层在预焙铝电解槽上应用

    Application of TiB_2 Cathode Coatings Solidified Under Ambient Temperature in Pre-Baking Aluminum Reduction cells