反应釜

模糊聚类学习算法在连续搅拌反应釜（CSTR）系统动态建模中的应用

Application for Dynamic Modeling of Continuous Stirred Tank Reactor ( CSTR ) System Using Fuzzy Clustering Method

用高压反应釜对一种骨架Ni催化剂和八种Pd/Al2O3催化剂在苯乙烯环境下，对连串反应苯乙炔的选择性加氢性能进行了实验评价。

The catalytic performance of a Raney nickel catalyst and eight Pd / Al_2O_3 catalysts in selective hydrogenation of phenylacetylene in the presence of styrene was studied using a high-pressure reactor .

搅拌反应釜智能CAD系统的研究与应用

Research and application on intelligent CAD system of stirred bed reactor

连续搅拌反应釜的非线性H∞控制

Nonlinear H_ ∞ control of continuous stirred tank reactor

基于模糊自适应PID的反应釜液位控制

Control of Liquid Level in Reactor Based on Fuzzy Self-adaptation PID

基于面向对象的搅拌反应釜CAD系统的分析和设计

The analysis and design of stirred bed reactor CAD system based on object-oriented technology

聚合反应釜自调整模糊PID控制器的设计及仿真

The Design and Simulation of Fuzzy PID Controller with Parameter Adjustment for Polymerizing-kettle

自校正PID控制器及其在制胶反应釜温度控制中的应用

Self-Tuning PID Controller and It 's Application to the Temperature Control of a Reactor

SAN聚合反应釜燃油锅炉温度控制系统设计

Design of the oil boiler temperature control system for SAN polyreaction cauldron

基于迭代学习控制的PVC反应釜温度控制的鲁棒性研究

Research on Robustness for PVC Reactor Temperature Control Based on Iterative Learning Control

为解决反应釜密封泄漏问题，研制了新型类C形密封环。

To solve the problem of leakage of reaction vessel , a new C-ring for the sealing of the reaction vessel is developed .

在反应釜内通过水解开环聚合制备了聚酰胺6/凹凸棒土（PA6/ATP）纳米复合材料，利用XRD和EXSC等测试手段分析了该复合材料的结晶结构；

PA6 / ATP nano-composites were prepared via hydrolytic ring-open polymerization in a reactor .

动态校正的PI型广义预测控制器及其在反应釜系统中的仿真研究

Dynamic Tuning PI type Generalized Predictive Controller and Simulation Research on Reactor System

其中，反应釜温度控制算法采用的是PID（ProportionIntegrationDifferentiation）控制算法。

Among them , the reactor temperature control algorithm mainly uses a PID ( Proportion Integration Differentiation ) control algorithm .

接着推导出此模型的逆模型，并将得到的逆模型作为控制器对连续搅拌反应釜对象进行pH控制。

Then this inverse model is taken as the controller to control pH value of Continuous Stirred Tank Reactor ( CSTR ) .

介绍了采用面向对象技术，结合专家系统、CAD技术及机器学习的理论和方法，在VC++6.0环境下，开发了搅拌反应釜智能CAD系统。

The development of the intelligent CAD system about stirred bed reactor is introduced with object-oriented technology , expert system , CAD and machine learning .

使用大型有限元分析软件ANSYS对新型反应釜釜内螺旋叶片进行三维有限元建模，并建立相应的力学模型。

The 3-D finite element analysis model and its mechanical modal in new type reactor were been built with ANSYS software .

在高压反应釜中考察了反应温度、催化剂、pH、物料配比及搅拌速率对反应结果的影响。

The effect of different factors on the hydrolysis reaction , such as reaction temperature , catalyst , pH and stirring rate was investigated at high pressure .

连续搅拌反应釜（CSTR）的神经网络动态建模

Study on Neural Network Dynamic Modeling of Continuous Stirred Tank Reactor

基于MCGS的反应釜控制系统设计与实现

Design and Realization about Reactor Control System Based on MCGS

文中介绍了利用BP神经网络的高度非线性逼近能力，解决连续搅拌反应釜动态液位测量问题。

This paper introduces a method which takes the use of the powerful nonlinearity approach capability of BP neural networks to measure the dynamic liquid levels in continuous-stirring reactors .

同时对常规PID控制和模糊-PID复合控制策略进行比较论证、仿真分析和实验研究，并将该模糊-PID复合控制器应用于间歇式反应釜的温度控制回路，取得了理想的控制效果。

Simulate the combine control and PID control with matlab , and then apply this controller to the batch reactor temperature control , and get the perfect control effect .

一方面，这种再生反应釜地内部材质PE具有更好的防腐性能，使用寿命远远优于玻璃钢；

On the one hand , such a reactor to the internal renewable materials PE has better anti-corrosion performance , service life far superior to glass fiber reinforced plastic ;

针对实际的反应釜故障诊断问题，文章中给出了遗传算法优化BP神经网络权值及阂值的具体实施步骤。

In view of the actual fault diagnosis of the batch reactor , this paper gives idea and specific steps of the genetic algorithm to optimize the BP weights and thresholds .

控制器以釜内温度测量值为反馈量，采用模糊自适应PID算法，对反应釜内加热炉的加热电压进行控制，实现闭环控制。

Controller to temperature measurements in the kettle for feedback , using fuzzy Adaptive PID algorithm , heating voltage to the heating furnace in the reactor controls , implement closed-loop control .

实验结果表明，与常规的PID控制方案相比，该方案提高了系统的鲁棒性和适应性，较好的解决了反应釜温度控制的难题，对其它类似的被控对象的控制问题有一定的参考价值。

Experimental results showed that compared with conventional PID control program , the program improved the system robustness and adaptability . It gives a better solution to the reactor temperature control problem .

提出了一种连续搅拌反应釜（CSTR）的混合监督学习控制方法。

A new hybrid supervised learning control scheme is presented for continuous stirred tank reactor ( CSTR ) systems .

提出基于客户&服务器模式的连续搅拌反应釜（CSTR）控制系统。

This paper presents the implementation of a client server modeling experiment of Continuous Stirred Tank Reactors ( CSTR ) system .

通过对几种还原剂和还原方式的探索，得到最优化的的还原方式及具体还原参数：高压反应釜乙二醇160℃还原，PH值为11。

The most optimal way and the specific parameters of reduction are obtained by means of several explorations to the reductions . Ethylene glycol is acted as reducing agent in autoclave ( 160 ℃) and PH is 11 .

针对裂解反应釜具有容积滞后大的动态特性，本文相对应地引入了积分分离PID控制算法和抗积分饱和PID控制算法。

According to the fact that the temperature control of cracking reaction has big volume lag and dynamic feature , integral separation PID control algorithm and the anti-windup PID control algorithm are correspondingly introduced in this paper .