参数设计

分析了该无损吸收Cúk变换电路的工作原理，给出了变换电路参数设计方法，并采用该变换电路设计了一台直流1kW48V太阳能电池稳压器。

The operating principle and the parameter design method are presented .

基于JAVA的等角速万向联轴器参数设计系统

Parameter Design System of Constant Velocity Universal Joint Based on JAVA

电路可靠性参数设计CAD软件研究

Research on Parameter Design CAD Software of Circuit

利用统计学评价结果辅助颅脑MRI分割方法的参数设计

A Statistic Evaluation Method Assisting Segmentation of Brain MRIs

神光III强激光能源模块参数设计与保护策略

Parametric Design and Protective Strategy of Energy Module For SG-III High Power Laser

用DELPHI编程实现频率合成器参数设计的方法

The method of parameter design to realize the frequency synthesizer by Delphi

Gabor变换的参数设计及其在车牌字符识别中的应用

Gabor parameter design its use in character recognition of vehicle registration number

探讨了使用S参数设计低噪声放大器（LNA）的方法。

A design approach of low noise amplifiers ( LNA ) based on S parameter is studied .

在AGREE可靠度分配算法中，首次采用三次参数设计中的极差，来确定可靠度分配中的重要度因子，使可靠度分配结果更具科学性和合理性。

In the method of reliability allocation of the AGREE , It is first to determine important degree factor of reliability allocation by three-parameter design . Therefor , the result of reliability allocation is changing more science and more rational .

本文还针对参数设计中望目特性SN比计算式在机械稳健设计中的不足提出并使用了分别为模糊目标和明确目标的两种SN比的修正式，增强了望目特性的实用性。

The revised equations of signal to noise ratio on definite purposed character in three stage design are advanced for fuzzy expected objective and definite objective , which is applied in robust design of helical springs .

以AutoCAD为绘图支撑软件，在分析DXF接口的同时，建立了接口子程序和专业绘图模块，在此基础上对土建结构CAD变参数设计过程及方法进行了研究。

With AutoCAD as a drawing supporting software , subroutines and drawing modules are produced and the drawing exchange file is analyzed , on the basis of which designing process and method of the parameters of civil engineering structure CAD are studied .

利用Java和OPENI-DEAS对I-DEAS进行二次开发，实现了通过浏览器（Browser）同I-DEAS通信，并结合Prg和Excel实现三维产品模型参数设计的网络化。

It is going to secondary development using Java and Open I-DEAS for I-DEAS . Same I-DEAS communication has realized to pass through browser , and combination Prg and Excel realize the network of 3D product model parameter design .

介绍了相控线阵声波测井辐射器的工作原理，根据辐射器各个阵元的性能参数设计了两种供实验使用的激励信号源，即5通道Burst信号源和4通道脉冲信号源。

The operating mechanism of the phased array acoustic logging transmitter was discussed . Based on the performance parameter of the element of the phased array transmitter , two kinds of exciting signal sources were designed which were 5-channel Burst signal source and 4-channel impulse signal source .

模块的软件设计主要包括：DDC滤波器参数设计和DSP的基带信号处理，给出了Viterbi信道译码算法DSP实现和发射端突发形成的仿真实现。

The design of software module includes the parameter design for DDC filter and the baseband signal processing of DSP . And the realization of the Viterbi channel decoding algorithm by DSP and the simulation of the burst at the transmitter are discussed .

探讨了Pro／Engineer二次开发方面的关键技术，使模型具有直接的参数设计能力，模型优化功能，模型文件的管理并对模型的信息提取技术进行了开发。

The key technologies in the secondary development of Pro / Engineer are discussed , which make the models have the following functions , such as designing the parameters directly , optimizing models , managing model files . Furthermore the information extraction technology of models is developed .

采用振型分解反应谱法，分析了小高层建筑屋顶花园作为TMD的减震原理和该TMD与主体结构频率比和质量比的变化规律，并阐述了对TMD的最优参数设计；

This paper , by taking roof garden as TMD in mid-rise building , discusses the shock reduction principle and the change rule of frequency ratio and mass ratio between TMD and structure , based on the modal analysis response spectrum . The TMD 's optimal parameters design is explained .

分析研究了主从模块法并联高频软开关逆变电源的电路拓扑、稳态原理、三态离散脉冲调制（DiscretePulseModulation，DPM）电流滞环控制技术、均流原理和关键电路参数设计。

This paper discusses the circuit topology , steady principle , the three-state Discrete Pulse Modulation ( DPM ) hysteresis current control strategy , principle of current sharing and criteria for the key circuit parameters of parallel inverter with high frequency and soft switch constituted in master-slave mode .

锤击式破碎机的结构及主要参数设计

The Hammer Type Crusher 's Structure and the Main Parameter Design

阀控动力元件最佳参数设计与极值法

Designing the optimum parameters of valve controlled power elements minimal method

履带机械闭式静压驱动系统参数设计与校核

Parameter Design and Check of Hydrostatic Transmission System on Crawler-tracked Machines

大功率整流机组滤波器的参数设计方法

The Harmonics Filter Parameter Design of the High Power Rectification Machine

工程机械悬置式座椅动态参数设计研究

Investigation on Design of Dynamical Parameters of Suspension Seat in Engineering Machinery

振动磨机介质运动规律及参数设计

The Regularity of Medium Motion in a Vibratom and Design of Parameters

振动电机激振的振动筛运动分析及主参数设计

Movement Analysis and Main Parameters Design for the Vibratory Screen

环形染料激光腔的分离参数设计方法

Method of separating parameters design for ring dye laser resonator

浅层海水下挤淤爆破的参数设计及分析

Parameters Design and Analysis of Crushing-Silt Blasting in Shallow Undersea

间歇气举采油工艺参数设计方法

Process Parameter Design of Production by Intermittent Gas Lifting

挠性陀螺平台罗经精校状态参数设计

Parameters Design of Flexible Stabilized Gyrocompass in Accurate Alignment

剪式并联机构尺度参数设计理论与方法

Dimensional design theory and methodology of scissor parallel manipulator

锚网索耦合支护参数设计与系统可靠性分析

Parameter Design and Reliability Analysis of Bolt , Mesh and Cable Catenation Support