加力

结果：①加力方式2的牙周膜应力分布更均匀。

Result : The stress on PDL of loading 2 was more uniform than loading 1 .

外侧加力，三棱针刚度最小，残余变形居中。

Lateral loading , the rigidity of triangular needle was smallest , its rem-nant deformation was medium .

带多圈环形V型稳定器的加力燃烧室两态燃油浓度分布计算

Calculation of fuel concentration distribution in afterburner with V-shape flameholders

在用SIMPLE方法计算模型加力燃烧室的流场时，发现SIMPLE方法存在不易收敛的问题。

The fluid fields in modelling afterburner are calculated using SIMPLE procedure , it is found difficult to make the calculation convergence .

补燃加力式喷气飞机焦炉修补喷射的FLUENT仿真研究

Reheat jet aircraft Simulation Research on Patching Coke Oven Based on FLUENT

不同的力值和加力时间对正畸牙龈沟液中IL-1β水平的影响研究

Effect of Orthodontic Force and Duration on IL-1 β Level in Gingival Crevicular Fluid

MPS型中速磨煤机磨煤机属于外加力型辊盘式磨煤机。

MPS secondary-speed coal pulverizer is a kind of entering-force coal pulverizer .

加力可以促进HIF-1α表达的增多，周期性牵张力促进成骨分化与HIF-1α有关。

The cyclical stretch may promote the expression of HIF-la . 3 .

结果单纯加力组在18%牵张应变量作用下，COX-2表达随着加载时间的增加而增强；

Results In tension-force group , the expression of cyclooxygenase-2 enhanced with the extension of loading time .

与未加力组和空白组相比均有统计学差异（P0.05）。

Comparing with no force group and blank control group , all these indexes in experimental groups had statistical significance ( P0.05 ) .

经过3d的潜伏期，进行连续5d的牵张加力，之后进入固定期。

After a 3-day latency , the rats underwent distraction for 5 days and entered into the consolidation period .

加力+细胞松弛素组在18%牵张应变量作用下，COX-2的表达明显降低，且各加载时间组间表达无差别。

In tension-force and inhibitor group , cyclooxygenase-2 expression was depressed and had no relation with loading time .

结果BMP-2在正畸牙齿加力各个时期存在特异的分布模式。

Results BMP-2 expression had a specific pattern during orthodontic tooth movement .

本人一个旧的diy亚加力灯架刚好配合这迷你缸的大小。

The old DIY acrylic light rack fits perfectly onto this tank .

正畸加力后大鼠牙周组织中BMP的分布变化及其意义

Distribution of Bone Morphogenetic Protein ( BMP ) in Periodontal Tissue of Rats during Orthodontic Tooth Movement

在力学试验中，采用了倒V型绝缘子串的横担侧挂点固定、导线侧加力的方法。

In the mechanic testing , the method of backward V insulators with the side fixing of cross-arm and adding force on side of wire was adopted .

运用改进模型、传统模型以及考虑死层时模拟Pb（ZrxTi1-x）O3铁电薄膜在外加力场和电场下的电滞回线和蝶形曲线。

The hysteresis loops and butterfly curves are simulated by the improved and traditional models considering the dead layer .

采用间歇加力试验法研究非晶聚合物材料PMMA的分子运动-温度关系。

The Interval load Method was adopted to study the relation between the molecular motion of amorphous PMMA and temperature .

牙周炎牙齿正畸加力前后龈沟液中PGE2和ALP的变化

The effects of orthodontic force on PGE_2 and ALP level in gingival crevicular fluid of the tooth with periodontitis

重点介绍了EFE型发动机的风扇加力燃烧室、喷管系统设计改进的特点。

Design improvement characteristics of EFE fan afterburner and nozzle system are particularly discussed .

本文在二维贴体坐标系下，对一带V型稳定器的模型加力燃烧室燃烧流场采用大涡模型进行了并行数值模拟。

Under the two-dimensional body-fitted coordinate , Large-eddy simulation ( LES ) of turbulent chemically reacting flows in the model afterburner with the V-gutter flame holder was carried out by using parallel computing .

GCF中酶和IL-1β含量的变化可以作为分析临床正畸加力大小是否合适的参考指标。

The change of levels of enzymes could be a kind of reference index for judging optimized orthodontic force in clinic .

目的：检测正畸加力后牙周组织中整合素αVβ3的表达，探讨整合素αVβ3在实验性牙移动牙周组织骨改建中的作用。

Objective : To examine the expression of integrin α V β 3 in periodontium during experimental tooth movement , and then to propose the possible role of α V β 3 in bone remodeling during tooth movement .

在外加力作用下，用SPICE软件调用固支梁的IP库并结合外加电路进行了系统级的模拟，得到微传感器分布参数的电学参量输出特性曲线；

Under the outside force load , the output electrical parameters ' characteristic of distributed-parameter clamped-clamped beam microsensor is presented by adopting the IP library and taking system-level simulation including the periphery circuits with SPICE .

这种染色在正畸加力后12h、1d、3d天有不同程度的增强，3d达到高峰，加力后7d和14d表达减弱，第14d与对照组无明显差异。

Expressions of iNOS was increased in 12 hours , 1 day and reached to peak in 3 days , and then decreased after 7 days and 14 days .

实验组以2次/天的频率、0.15mm/次的速率加力，2w后固定保持。

The experimental side was activated 0.3mm / day , twice a day for 2 weeks and followed by retention .

结果：实验性正畸牙齿移动过程中，BMP-1在牙周组织中的表达和分布随着加力时间的改变存在特异的分布模式。

Results : BMP-1 in the existence of various periods of orthodontic tooth has a specific distribution patterns .

在颅骨冠状缝两侧安放自行研制的牵张器，以每天0.4mm的速率进行骨缝牵张，连续加力8d。

A customized distractor was used for distraction of the coronal suture at a rate of 0.4 mm / day for 8 days .

在实验加力组，BMP-7阳性染色在张力侧比压力侧要强，尤其是临近牙槽骨的成纤维细胞和成骨细胞的胞浆染色最强。

In experimental group , positive staining in the tension side in stronger than the pressure side , especially the fibroblasts and osteoblasts near alveolar has strongest staining .

BMP-1在牙周组织中的表达随着加力时间的增加呈现先上升后下降的趋势。

Orthodontic tooth movement of the bone remodeling process of BMP-1 levels increased with time was first increased and then decreased trend .