前驱体

二元金属类水滑石的合成及其作为前驱体对NOx的吸附性能研究

Studies on the Preparation and Adsorption as Precursor for Nitrogen Oxides of Diatomic Metal Hydrotalcite-like Compounds

间接前驱体为：Ni和Ni2+；

Indirect precursor are Ni and Ni2 + .

以β-Co（OH）2为前驱体合成LiCoO2的研究

Synthesis of LiCoO_2 Using β - Co ( OH ) _2 as Precursor

煤及煤焦气化过程中NOx前驱体释放规律研究

Study on the release of no_x precursors during coal and its char gasification

前驱体LixMoS2的制备及其光谱分析

Preparation of Premonitory Li_xMoS_2 and Its Spectral Analysis

不同处理条件对前驱体转变成ZrW2O8的影响

Effect of different treatment conditions on Transformation of precursor to zrw_2o_8

稀土配合物作为前驱体合成Y2O3∶Eu纳米材料

Synthesis of y_2o_3 ∶ eu nanocrystalline by complex precursors

用离子液前驱体合成高荧光性能的ZnO和CdS纳米材料

Highly luminescent ZnO and CdS nanostructures prepared by ionic liquid precursors

ZnO纳米粒子与沸石组装体系前驱体的制备条件研究

Preparation Condition of Nano-particle ZnO and Zeolite Composite Precursor

结果表明：通过前驱体pH的控制可得到均匀的溶胶和凝胶。

The results show that the uniform sol and gel were obtained by adjusting pH value without any precipitation .

用尿素作沉淀剂制备不同CeO2前驱体

Preparation of different CeO_2 precursors with precipitator urea

优化前驱体Al（OH）3的制备方案。

Firstly , the method to prepare Al ( OH ) _3 which would act as the precursor was optimized .

对新型的炭材料的有机前驱体－RF气凝胶的合成工艺进行了探索研究。

Abstract : The synthesis processe of organic precursor-RF aerogel of new carbon material was studied .

以RuCl3为前驱体的无氯Ru/Al2O3氨合成催化剂的制备

Preparation of the chlorine-free Ru / Al_2O_3 ammonia synthesis catalyst with RuCl_3 as the precursor

前驱体溶液配比及pH值对凝胶-燃烧合成纳米MgO颗粒的影响

The effect of composition and pH value of precursor solution on gel-combustion synthesis of MgO nanocrystalline powders

加料方式对CuO/ZnO/Al2O3系催化剂前驱体性质的影响

Influence of precipitation method on the properties of precursors of CuO / ZnO / Al_2O_3 catalysts

研究了柠檬酸（CA）/乙二醇（EG）（质量比）、pH值对前驱体溶胶稳定性的影响。

The effects of CA / EG and pH value on the stability of the precursor sol were investigated .

利用IR、XRD、TEM分析了前驱体的化学组成、物相变化以及形貌；

The composition , morphology and phase transformation of precursor were analyzed by IR , XRD , TEM .

本文以氧化石墨烯（GO）为前驱体，采用不同的方法制备杂原子掺杂石墨烯，并对其结构和性能进行了系统的研究。

In this thesis , we choose graphene oxide ( GO ) as precursors to prepare heteroatom doped graphene by different methods , and systematically studied their structures and properties .

丙烯腈聚合物（PAN）是高性能碳纤维的主要前驱体。

Acrylonitrile polymer ( PAN ) is the main precursor for manufacturing the high strength carbon fiber .

Y2O3掺杂稳定ZrO2配合物的前驱体分子结构及小尺寸效应

Precursor Structures and Small Size Effect for Y_2O_3-Doped ZrO_2 Complex

胶溶剂的添加对氧化铝及其前驱体粉体特性有显著改变，胶溶剂种类、pH值和添加量不同，影响不同。

The characteristic of alumina and hydrated alumina powders was greatly influenced by adhesive solvents with different species , content and pH value .

酚醛树脂前驱体CC复合材料研究&硼酚醛树脂理化性能分析及固化、热解过程研究

Physical-chemical properties and curing pyrolysis processes of boron phenolics precursor in carbon carbon composites

通过调节反应温度，前驱体比例，我们可以优化实验条件，制备得到高质量的CdS和ZnS纳米晶。

Different reaction temperatures and precursor ratios were tested to optimize synthesis conditions .

铟锡氧化物（ITO）前驱体的相演变规律研究

Phase Evolutions of Co-precipitated Indium - tin Oxide Precursors

提出了一种以TiSO4为前驱体的制备锐钛矿型纳米TiO2的液相沉淀法。

A liquid-phase precipitation method for anatase nanoparticle titania was developed using titanium sulphate as the precursor .

结果表明，微量掺杂对材料的粒径、振实密度和形貌影响不大，Al元素均匀分布在前驱体颗粒表面。

The results showed that small doping of Al element had no effect on the particle size , tap-density and morphology of the material .

稀土配合物前驱体热分解法合成Y2O3：Eu~（3+）纳米材料

Synthesis of Y_2O_3 : Eu ~ ( 3 + ) nanocrystalline by thermal decomposition of rare earth complex precursors

首次采用配置溶胶并进行喷雾干燥来制备（W，Ni，Fe）前驱体复合氧化物粉末。

( W , Ni , Fe ) precursor composite oxide powders were first synthesized by preparation of solution colloid and spray drying .

结果表明，前驱体碳化复合技术制备的TiFeC系反应喷涂复合粉末中C/Ti原子比是影响涂层相组成、显微结构和硬度的关键因素。

The results show that C / Ti atomic ratio has strong influence on the component , microstructure and hardness of TiC / Fe composite coating .