制动踏板

zhì dònɡ tà bǎn
  • brake pedal
制动踏板制动踏板
  1. 汽车制动踏板操纵力与行程分析系统研究

    Research of Automobile Brake Pedal Force and Displacement Analysis System

  2. 确定了制动踏板信号的检测方法,讨论了如何实现制动踏板信号系统容错功能的相关问题。

    Design brake pedal signal-gathering method , and discussed how to fulfill fault-tolerant function of brake pedal .

  3. 当激活abs系统时,驾驶员踩制动踏板有轻微的脉动的感觉。

    When ABS is activated , the driver feels the brake pedal pulsate gently .

  4. 前、后制动器分别为前通风盘式制动器和实心盘式制动器,制动踏板为吊挂式踏板,带真空助力器,制动管路为双回路对角线(X型)布置,采用ABS。

    Before and after the brakes were a former ventilated disc brakes and solid disc brakes , brake pedal for the hanging pedals , with vacuum booster , brake pipe for dual-loop diagonal ( X type ) arrangement , using ABS .

  5. 液压试验台测试630E双路制动踏板阀

    Testing the Two-circuit Brake Pedal Valve of 630E Electric Wheel Drive on Hydraulic Test Bench

  6. 当踩下制动踏板后,从空气压缩机l来的高压气体推动气液总泵4的气活塞,气活塞再推动油活塞。

    When the pressure to the brakes , the air compressor from lto promote the gas-liquid high-pressure gas4 gas piston master cylinder , gas piston and then push the oil piston .

  7. 手制动踏板托架弯曲工艺的改进及模具设计

    The bending process improvement and die design for handbrake step brackets

  8. 汽车制动踏板力-行程检查仪及其标定

    Instrument for Testing the Force and Range of Automobile Brake Pedal and Its Calibration Method

  9. 检查制动踏板行程和踏板手感。

    Check brake-pedal travel and pedal feel .

  10. 转向盘力/角仪及制动踏板力计标准装置的研制

    The manufacture of standard instrument of swerve force / angle meter and brake pedal force meter

  11. 制动器也可由与制动踏板和手制动器杆相连的机械联动装置操纵。

    The brakes may also be operated by mechanical linkages from the foot pedal and handbrake lever .

  12. 出于安全方面的原因,在一次操纵制动踏板期间会临时重新启动行驶动力控制。

    For safety reasons , the driving dynamics control is reactivated temporarily for the duration of one brake pedal actuation .

  13. 它还可以让驾驶员更好地控制汽车,而无需始终踩住制动踏板不放。

    It also gives the driver even greater control over their car without the need to keep the brake pressed constantly .

  14. 督导的汽车转动方向盘,和使用的制动踏板和离合器的职能。

    Steering of the car was by turning the steering wheel , and use of the pedals for brake and clutch functions .

  15. 制动踏板略有推迟觉得,一个特质也是共同的许多竞争对手在这一领域。

    The brake pedal has a slightly delayed feel , a trait which is also common to many competitors in this segment .

  16. 并已成功地试制出了减震器支座和轿车制动踏板臂,实践中也证明该钢具有良好成形性和可焊性。

    The automotive shock absorber holders and brake pedal arms have been successfully produced with such TRIP steel that proves its good formability and weldability .

  17. 采用该系统,再配合上电子加速踏板、制动踏板、智能仪表等,就构成了电动车动力总成。

    Using this system , coupled with the electronic accelerator pedal , brake pedal , intelligent instruments and so on , constitute the electric vehicle powertrain .

  18. 测试车辆的行驶速度、转速、油耗和制动踏板力,同期进行车辆流量统计。

    The driving speed , rotate speed , fuel consumption and braking force on the footplate of the car are measured and the traffic flow is counted at the meantime .

  19. 本文介绍了一种转盘向力角仪、制动踏板力计标准装置的研制,重点阐述了该标准装置的检测原理和显著特点。

    This paper presents the manufacture of a standard instrument of swe rve force / angle meter and brake pedal force meter , emphasis on its measurement theory and remarkable characteristic .

  20. 介绍了汽车制动踏板力-行程检查仪的结构原理、标定和检测的方法。

    Introduces the construction and principle of the instrument for testing the force and range of the automobile brake pedal and its calibrater as well as the methods of calibrating and testing the brake pedal range .

  21. 初步试验表明,该增力式车轮制动器增力效果显著,制动力大小仍然可以通过制动踏板进行控制,最大制动力能够达到试验车气压制动的水平。

    The initial tests indicate that servo effectiveness of the servo brake is evident , and brake torque can be controlled by brake pedal , and the maximum brake torque reaches the level of its original air brake system .

  22. 在应急制动时,当制动踏板控制的制动压力过大时,轮速传感器和控制器会检测到车轮有抱死的倾向,此时控制器控制制动系统减小制动压力。

    In emergency braking , when the brake pedal pressure is too large , the wheel speed sensor and the controller detects a wheel locking tendency , then the controller reduces the braking pressure .

  23. 试验台共包括四部分:制动意图发生单元,通过安装在制动踏板上的位移传感器实时获取驾驶员的制动意图;

    The test line includes four segment : Brake desire generating part , which acquiring the real-time brake desire of driver with a displacement sensor installing on the axis of brake pedal ;

  24. CA7220红旗轿车装配ABS时,如按常规的真空排气加注制动液步骤对ABS进行操作,存在制动踏板发软、制动距离延长等问题。

    During the ABS assembling process of Hong Qi CA7220 car , you will feel brake pedal soft and braking distance long if common procedures of filling brake fluid through vacuum gas removal are used .

  25. 低速行车中制动泊车的操作方法是先踩下制动踏板,然后再踩下离合器踏板,使汽车平稳地停下来。

    Low-speed driving in the method of operation of parking brake is to brake pedal , and then the clutch pedal , making the car a smooth stop .

  26. 刹车不平顺性是指车辆制动过程中驾乘人员在方向盘、制动踏板和座椅上感觉到的过度振动,简称制动抖动。

    Braking harshness , called brake judder , means excessive vibrations of steering wheel , brake pedal and seats , which drivers and passengers can feel during braking process .

  27. 文章建立了具有感载比例阀的轻型客车制动系统分析模型,对轻型客车制动系统的制动性能、制动踏板力、制动稳定性及其前后制动力的匹配进行了详细地分析;

    An analysis model of the light bus braking system with the load sensing valve is established . Comprehensive analysis of brake performance , brake pedal force , braking stability and brake force matching between front and rear axles is carried out .

  28. 通过对城市公共汽车再生制动力矩和车轮液压制动模型的分析,把再生制动力矩折算成相应的液压制动踏板行程,从而使再生制动力矩产生的制动感觉和液压制动感觉一致。

    By analyzing regenerative braking moment and wheel hydraulic braking model , regenerative braking moment is converted to hydraulic-brake pedal travel and the sense of regenerative braking is un - ( ited ) with traditional braking sense .

  29. 讨论了汽车制动系统各部分元件的结构、功能及工作过程;分析了在汽车制动过程中,由于制动系统的本身结构及制动踏板力响应、制动液压响应所引起的制动系统的非线性特性;

    First , the structure , function and working progress of components in braking system are discussed , meanwhile , the nonlinear characteristics of braking system which is caused by the response of the braking pedal force , braking hydraulic pressure is analyzed .

  30. 大多数现代制动系统中具有充满液体的油缸,叫做主缸,主缸有两套各自独立的管路,每套管路各有一活塞,并且两个活塞都与驾驶室中的制动踏板相连接。

    In most modern brake systems , there is a fluid-filledcylinder , called the master cylinder , which contains two separate sections , there is a piston in each section and both pistons are connected to a brake pedal in the driver 's compartment .